arm64: dts: ti: k3-am62x: Add overlays for OV5640
authorJai Luthra <j-luthra@ti.com>
Fri, 1 Dec 2023 05:09:21 +0000 (10:39 +0530)
committerNishanth Menon <nm@ti.com>
Tue, 5 Dec 2023 20:05:53 +0000 (14:05 -0600)
commit635ed97151945a7fdf104ef1227d86f0a9e3678e
tree58ce681d9cb7e3ba190f0c26797fe5b72bcb5496
parentfed1e53ecf9f0ecf04bd931428287fd1002899ef
arm64: dts: ti: k3-am62x: Add overlays for OV5640

Three different OV5640 modules are supported using the 15-pin FFC
connector on SK-AM62:
- Digilent PCam 5C
- ALINX AN5641
- TEVI-OV5640-*-RPI

The Digilent and ALINX modules supply a 12Mhz XCLK to the sensor, while
the TEVI module supplies a 24Mhz XCLK, thus requiring a separate
overlay.

These overlays can be used on other boards of the SK-AM62* family that
have a 15/22-pin FFC connector, so we name the overlays with the prefix
k3-am62x-.

Tested-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20231201-csi_dts-v3-6-9f06f31080fe@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
arch/arm64/boot/dts/ti/Makefile
arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso [new file with mode: 0644]
arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso [new file with mode: 0644]