drm/i915/hwmon: Fix locking inversion in sysfs getter

drm/i915/hwmon: Fix locking inversion in sysfs getter

In i915 hwmon sysfs getter path we now take a hwmon_lock, then acquire an
rpm wakeref.  That results in lock inversion:

<4> [197.079335] ======================================================
<4> [197.085473] WARNING: possible circular locking dependency detected
<4> [197.091611] 6.8.0-rc7-Patchwork_129026v7-gc4dc92fb1152+ #1 Not tainted
<4> [197.098096] ------------------------------------------------------
<4> [197.104231] prometheus-node/839 is trying to acquire lock:
<4> [197.109680] ffffffff82764d80 (fs_reclaim){+.+.}-{0:0}, at: __kmalloc+0x9a/0x350
<4> [197.116939]
but task is already holding lock:
<4> [197.122730] ffff88811b772a40 (&hwmon->hwmon_lock){+.+.}-{3:3}, at: hwm_energy+0x4b/0x100 [i915]
<4> [197.131543]
which lock already depends on the new lock.
...
<4> [197.507922] Chain exists of:
  fs_reclaim --> &gt->reset.mutex --> &hwmon->hwmon_lock
<4> [197.518528]  Possible unsafe locking scenario:
<4> [197.524411]        CPU0                    CPU1
<4> [197.528916]        ----                    ----
<4> [197.533418]   lock(&hwmon->hwmon_lock);
<4> [197.537237]                                lock(&gt->reset.mutex);
<4> [197.543376]                                lock(&hwmon->hwmon_lock);
<4> [197.549682]   lock(fs_reclaim);
...
<4> [197.632548] Call Trace:
<4> [197.634990]  <TASK>
<4> [197.637088]  dump_stack_lvl+0x64/0xb0
<4> [197.640738]  check_noncircular+0x15e/0x180
<4> [197.652968]  check_prev_add+0xe9/0xce0
<4> [197.656705]  __lock_acquire+0x179f/0x2300
<4> [197.660694]  lock_acquire+0xd8/0x2d0
<4> [197.673009]  fs_reclaim_acquire+0xa1/0xd0
<4> [197.680478]  __kmalloc+0x9a/0x350
<4> [197.689063]  acpi_ns_internalize_name.part.0+0x4a/0xb0
<4> [197.694170]  acpi_ns_get_node_unlocked+0x60/0xf0
<4> [197.720608]  acpi_ns_get_node+0x3b/0x60
<4> [197.724428]  acpi_get_handle+0x57/0xb0
<4> [197.728164]  acpi_has_method+0x20/0x50
<4> [197.731896]  acpi_pci_set_power_state+0x43/0x120
<4> [197.736485]  pci_power_up+0x24/0x1c0
<4> [197.740047]  pci_pm_default_resume_early+0x9/0x30
<4> [197.744725]  pci_pm_runtime_resume+0x2d/0x90
<4> [197.753911]  __rpm_callback+0x3c/0x110
<4> [197.762586]  rpm_callback+0x58/0x70
<4> [197.766064]  rpm_resume+0x51e/0x730
<4> [197.769542]  rpm_resume+0x267/0x730
<4> [197.773020]  rpm_resume+0x267/0x730
<4> [197.776498]  rpm_resume+0x267/0x730
<4> [197.779974]  __pm_runtime_resume+0x49/0x90
<4> [197.784055]  __intel_runtime_pm_get+0x19/0xa0 [i915]
<4> [197.789070]  hwm_energy+0x55/0x100 [i915]
<4> [197.793183]  hwm_read+0x9a/0x310 [i915]
<4> [197.797124]  hwmon_attr_show+0x36/0x120
<4> [197.800946]  dev_attr_show+0x15/0x60
<4> [197.804509]  sysfs_kf_seq_show+0xb5/0x100

Acquire the wakeref before the lock and hold it as long as the lock is
also held.  Follow that pattern across the whole source file where similar
lock inversion can happen.

v2: Keep hardware read under the lock so the whole operation of updating
    energy from hardware is still atomic (Guenter),
  - instead, acquire the rpm wakeref before the lock and hold it as long
    as the lock is held,
  - use the same aproach for other similar places across the i915_hwmon.c
    source file (Rodrigo).

Fixes: 1b44019a93e2 ("drm/i915/guc: Disable PL1 power limit when loading GuC firmware")
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: <stable@vger.kernel.org> # v6.5+
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240311203500.518675-2-janusz.krzysztofik@linux.intel.com
(cherry picked from commit 71b218771426ea84c0e0148a2b7ac52c1f76e792)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>