selftests: forwarding: Add QinQ veto testing

Test that each veto that was added in the previous patch, is indeed
vetoed.

$ ./q_in_q_veto.sh

TEST: create 802.1ad vlan upper on top of a front panel             [ OK ]
TEST: create 802.1ad vlan upper on top of a bridge port             [ OK ]
TEST: create 802.1ad vlan upper on top of a lag                     [ OK ]
TEST: create 802.1ad vlan upper on top 802.1q bridge                [ OK ]
TEST: create 802.1ad vlan upper on top 802.1ad bridge               [ OK ]
TEST: create 802.1q vlan upper on top 802.1ad bridge                [ OK ]
TEST: create vlan upper on top of front panel enslaved to 802.1ad bridge
[ OK ]
TEST: create vlan upper on top of lag enslaved to 802.1ad bridge    [ OK ]
TEST: enslave front panel with vlan upper to 802.1ad bridge         [ OK ]
TEST: enslave lag with vlan upper to 802.1ad bridge                 [ OK ]
TEST: IP address addition to 802.1ad bridge                         [ OK ]
TEST: switch bridge protocol                                        [ OK ]

Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

diff --git a/tools/testing/selftests/drivers/net/mlxsw/q_in_q_veto.sh b/tools/testing/selftests/drivers/net/mlxsw/q_in_q_veto.sh
new file mode 100755 (executable)
index 0000000..7edaed8
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/q_in_q_veto.sh
@@ -0,0 +1,296 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+lib_dir=$(dirname $0)/../../../net/forwarding
+
+ALL_TESTS="
+       create_8021ad_vlan_upper_on_top_front_panel_port
+       create_8021ad_vlan_upper_on_top_bridge_port
+       create_8021ad_vlan_upper_on_top_lag
+       create_8021ad_vlan_upper_on_top_bridge
+       create_8021ad_vlan_upper_on_top_8021ad_bridge
+       create_vlan_upper_on_top_8021ad_bridge
+       create_vlan_upper_on_top_front_panel_enslaved_to_8021ad_bridge
+       create_vlan_upper_on_top_lag_enslaved_to_8021ad_bridge
+       enslave_front_panel_with_vlan_upper_to_8021ad_bridge
+       enslave_lag_with_vlan_upper_to_8021ad_bridge
+       add_ip_address_to_8021ad_bridge
+       switch_bridge_protocol_from_8021q_to_8021ad
+"
+NUM_NETIFS=2
+source $lib_dir/lib.sh
+
+setup_prepare()
+{
+       swp1=${NETIFS[p1]}
+       swp2=${NETIFS[p2]}
+
+       ip link set dev $swp1 up
+       ip link set dev $swp2 up
+
+       sleep 10
+}
+
+cleanup()
+{
+       pre_cleanup
+
+       ip link set dev $swp2 down
+       ip link set dev $swp1 down
+}
+
+create_vlan_upper_on_top_of_bridge()
+{
+       RET=0
+
+       local bridge_proto=$1; shift
+       local netdev_proto=$1; shift
+
+       ip link add dev br0 type bridge vlan_filtering 1 \
+               vlan_protocol $bridge_proto vlan_default_pvid 0 mcast_snooping 0
+
+       ip link set dev br0 up
+       ip link set dev $swp1 master br0
+
+       ip link add name br0.100 link br0 type vlan \
+               protocol $netdev_proto id 100 2>/dev/null
+       check_fail $? "$netdev_proto vlan upper creation on top of an $bridge_proto bridge not rejected"
+
+       ip link add name br0.100 link br0 type vlan \
+               protocol $netdev_proto id 100 2>&1 >/dev/null \
+               | grep -q mlxsw_spectrum
+       check_err $? "$netdev_proto vlan upper creation on top of an $bridge_proto bridge rejected without extack"
+
+       log_test "create $netdev_proto vlan upper on top $bridge_proto bridge"
+
+       ip link del dev br0
+}
+
+create_8021ad_vlan_upper_on_top_front_panel_port()
+{
+       RET=0
+
+       ip link add name $swp1.100 link $swp1 type vlan \
+               protocol 802.1ad id 100 2>/dev/null
+       check_fail $? "802.1ad vlan upper creation on top of a front panel not rejected"
+
+       ip link add name $swp1.100 link $swp1 type vlan \
+               protocol 802.1ad id 100 2>&1 >/dev/null \
+               | grep -q mlxsw_spectrum
+       check_err $? "802.1ad vlan upper creation on top of a front panel rejected without extack"
+
+       log_test "create 802.1ad vlan upper on top of a front panel"
+}
+
+create_8021ad_vlan_upper_on_top_bridge_port()
+{
+       RET=0
+
+       ip link add dev br0 type bridge vlan_filtering 1 \
+               vlan_default_pvid 0 mcast_snooping 0
+
+       ip link set dev $swp1 master br0
+       ip link set dev br0 up
+
+       ip link add name $swp1.100 link $swp1 type vlan \
+               protocol 802.1ad id 100 2>/dev/null
+       check_fail $? "802.1ad vlan upper creation on top of a bridge port not rejected"
+
+       ip link add name $swp1.100 link $swp1 type vlan \
+               protocol 802.1ad id 100 2>&1 >/dev/null \
+               | grep -q mlxsw_spectrum
+       check_err $? "802.1ad vlan upper creation on top of a bridge port rejected without extack"
+
+       log_test "create 802.1ad vlan upper on top of a bridge port"
+
+       ip link del dev br0
+}
+
+create_8021ad_vlan_upper_on_top_lag()
+{
+       RET=0
+
+       ip link add name bond1 type bond mode 802.3ad
+       ip link set dev $swp1 down
+       ip link set dev $swp1 master bond1
+
+       ip link add name bond1.100 link bond1 type vlan \
+               protocol 802.1ad id 100 2>/dev/null
+       check_fail $? "802.1ad vlan upper creation on top of a lag not rejected"
+
+       ip link add name bond1.100 link bond1 type vlan \
+               protocol 802.1ad id 100 2>&1 >/dev/null \
+               | grep -q mlxsw_spectrum
+       check_err $? "802.1ad vlan upper creation on top of a lag rejected without extack"
+
+       log_test "create 802.1ad vlan upper on top of a lag"
+
+       ip link del dev bond1
+}
+
+create_8021ad_vlan_upper_on_top_bridge()
+{
+       RET=0
+
+       create_vlan_upper_on_top_of_bridge "802.1q" "802.1ad"
+}
+
+create_8021ad_vlan_upper_on_top_8021ad_bridge()
+{
+       RET=0
+
+       create_vlan_upper_on_top_of_bridge "802.1ad" "802.1ad"
+}
+
+create_vlan_upper_on_top_8021ad_bridge()
+{
+       RET=0
+
+       create_vlan_upper_on_top_of_bridge "802.1ad" "802.1q"
+}
+
+create_vlan_upper_on_top_front_panel_enslaved_to_8021ad_bridge()
+{
+       RET=0
+
+       ip link add dev br0 type bridge vlan_filtering 1 \
+               vlan_protocol 802.1ad vlan_default_pvid 0 mcast_snooping 0
+       ip link set dev br0 up
+
+       ip link set dev $swp1 master br0
+
+       ip link add name $swp1.100 link $swp1 type vlan id 100 2>/dev/null
+       check_fail $? "vlan upper creation on top of front panel enslaved to 802.1ad bridge not rejected"
+
+       ip link add name $swp1.100 link $swp1 type vlan id 100 2>&1 >/dev/null \
+               | grep -q mlxsw_spectrum
+       check_err $? "vlan upper creation on top of front panel enslaved to 802.1ad bridge rejected without extack"
+
+       log_test "create vlan upper on top of front panel enslaved to 802.1ad bridge"
+
+       ip link del dev br0
+}
+
+create_vlan_upper_on_top_lag_enslaved_to_8021ad_bridge()
+{
+       RET=0
+
+       ip link add dev br0 type bridge vlan_filtering 1 \
+               vlan_protocol 802.1ad vlan_default_pvid 0 mcast_snooping 0
+       ip link set dev br0 up
+
+       ip link add name bond1 type bond mode 802.3ad
+       ip link set dev $swp1 down
+       ip link set dev $swp1 master bond1
+       ip link set dev bond1 master br0
+
+       ip link add name bond1.100 link bond1 type vlan id 100 2>/dev/null
+       check_fail $? "vlan upper creation on top of lag enslaved to 802.1ad bridge not rejected"
+
+       ip link add name bond1.100 link bond1 type vlan id 100 2>&1 >/dev/null \
+               | grep -q mlxsw_spectrum
+       check_err $? "vlan upper creation on top of lag enslaved to 802.1ad bridge rejected without extack"
+
+       log_test "create vlan upper on top of lag enslaved to 802.1ad bridge"
+
+       ip link del dev bond1
+       ip link del dev br0
+}
+
+enslave_front_panel_with_vlan_upper_to_8021ad_bridge()
+{
+       RET=0
+
+       ip link add dev br0 type bridge vlan_filtering 1 \
+               vlan_protocol 802.1ad vlan_default_pvid 0 mcast_snooping 0
+       ip link set dev br0 up
+
+       ip link add name $swp1.100 link $swp1 type vlan id 100
+
+       ip link set dev $swp1 master br0 2>/dev/null
+       check_fail $? "front panel with vlan upper enslavemnt to 802.1ad bridge not rejected"
+
+       ip link set dev $swp1 master br0 2>&1 >/dev/null | grep -q mlxsw_spectrum
+       check_err $? "front panel with vlan upper enslavemnt to 802.1ad bridge rejected without extack"
+
+       log_test "enslave front panel with vlan upper to 802.1ad bridge"
+
+       ip link del dev $swp1.100
+       ip link del dev br0
+}
+
+enslave_lag_with_vlan_upper_to_8021ad_bridge()
+{
+       RET=0
+
+       ip link add dev br0 type bridge vlan_filtering 1 \
+               vlan_protocol 802.1ad vlan_default_pvid 0 mcast_snooping 0
+       ip link set dev br0 up
+
+       ip link add name bond1 type bond mode 802.3ad
+       ip link set dev $swp1 down
+       ip link set dev $swp1 master bond1
+       ip link add name bond1.100 link bond1 type vlan id 100
+
+       ip link set dev bond1 master br0 2>/dev/null
+       check_fail $? "lag with vlan upper enslavemnt to 802.1ad bridge not rejected"
+
+       ip link set dev bond1 master br0 2>&1 >/dev/null \
+               | grep -q mlxsw_spectrum
+       check_err $? "lag with vlan upper enslavemnt to 802.1ad bridge rejected without extack"
+
+       log_test "enslave lag with vlan upper to 802.1ad bridge"
+
+       ip link del dev bond1
+       ip link del dev br0
+}
+
+
+add_ip_address_to_8021ad_bridge()
+{
+       RET=0
+
+       ip link add dev br0 type bridge vlan_filtering 1 \
+               vlan_protocol 802.1ad vlan_default_pvid 0 mcast_snooping 0
+
+       ip link set dev br0 up
+       ip link set dev $swp1 master br0
+
+       ip addr add dev br0 192.0.2.17/28 2>/dev/null
+       check_fail $? "IP address addition to 802.1ad bridge not rejected"
+
+       ip addr add dev br0 192.0.2.17/28 2>&1 >/dev/null | grep -q mlxsw_spectrum
+       check_err $? "IP address addition to 802.1ad bridge rejected without extack"
+
+       log_test "IP address addition to 802.1ad bridge"
+
+       ip link del dev br0
+}
+
+switch_bridge_protocol_from_8021q_to_8021ad()
+{
+       RET=0
+
+       ip link add dev br0 type bridge vlan_filtering 1 \
+               vlan_protocol 802.1ad vlan_default_pvid 0 mcast_snooping 0
+
+       ip link set dev br0 up
+       ip link set dev $swp1 master br0
+
+       ip link set dev br0 type bridge vlan_protocol 802.1q 2>/dev/null
+       check_fail $? "switching bridge protocol from 802.1q to 802.1ad not rejected"
+
+       log_test "switch bridge protocol"
+
+       ip link del dev br0
+}
+
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS