pinctrl: renesas: rzg2l: Configure the interrupt type on resume
authorClaudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Fri, 19 Apr 2024 06:38:22 +0000 (09:38 +0300)
committerGeert Uytterhoeven <geert+renesas@glider.be>
Mon, 22 Apr 2024 07:54:00 +0000 (09:54 +0200)
Commit dce0919c83c3 ("irqchip/renesas-rzg2l: Do not set TIEN and TINT
source at the same time") removed the setup of TINT from
rzg2l_irqc_irq_enable().  To address the spurious interrupt issue the
setup of TINT has been moved in rzg2l_tint_set_edge() through
rzg2l_disable_tint_and_set_tint_source().  With this, the interrupts are
not properly re-configured after a suspend-to-RAM cycle.  To address
this issue and avoid spurious interrupts while resumming set the
interrupt type before enabling it.

Fixes: dce0919c83c3 ("irqchip/renesas-rzg2l: Do not set TIEN and TINT source at the same time")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240419063822.3467424-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
drivers/pinctrl/renesas/pinctrl-rzg2l.c

index 93916553bcc72a79155183bb761485b34744b55e..20425afc6b331b336c314d5a3f4c6dc9b813382d 100644 (file)
@@ -2045,7 +2045,9 @@ static void rzg2l_gpio_irq_restore(struct rzg2l_pinctrl *pctrl)
 
        for (unsigned int i = 0; i < RZG2L_TINT_MAX_INTERRUPT; i++) {
                struct irq_data *data;
+               unsigned long flags;
                unsigned int virq;
+               int ret;
 
                if (!pctrl->hwirq[i])
                        continue;
@@ -2063,17 +2065,18 @@ static void rzg2l_gpio_irq_restore(struct rzg2l_pinctrl *pctrl)
                        continue;
                }
 
-               if (!irqd_irq_disabled(data)) {
-                       unsigned long flags;
-
-                       /*
-                        * This has to be atomically executed to protect against a concurrent
-                        * interrupt.
-                        */
-                       raw_spin_lock_irqsave(&pctrl->lock.rlock, flags);
+               /*
+                * This has to be atomically executed to protect against a concurrent
+                * interrupt.
+                */
+               raw_spin_lock_irqsave(&pctrl->lock.rlock, flags);
+               ret = rzg2l_gpio_irq_set_type(data, irqd_get_trigger_type(data));
+               if (!ret && !irqd_irq_disabled(data))
                        rzg2l_gpio_irq_enable(data);
-                       raw_spin_unlock_irqrestore(&pctrl->lock.rlock, flags);
-               }
+               raw_spin_unlock_irqrestore(&pctrl->lock.rlock, flags);
+
+               if (ret)
+                       dev_crit(pctrl->dev, "Failed to set IRQ type for virq=%u\n", virq);
        }
 }