arm64: dts: qcom: sm8150: switch USB+DP QMP PHY to new style of bindings

Change the USB QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230711120916.4165894-10-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index a7c3020a5de491bf8027f4789eab9d411c371781..04bbf7ce2879dde3ff0bafbdadfa294d237dcb41 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -6,6 +6,7 @@
 
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
@@ -3434,38 +3435,27 @@
                        resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
                };
 
-               usb_1_qmpphy: phy@88e9000 {
-                       compatible = "qcom,sm8150-qmp-usb3-phy";
-                       reg = <0 0x088e9000 0 0x18c>,
-                             <0 0x088e8000 0 0x10>;
-                       status = "disabled";
-                       #address-cells = <2>;
-                       #size-cells = <2>;
-                       ranges;
+               usb_1_qmpphy: phy@88e8000 {
+                       compatible = "qcom,sm8150-qmp-usb3-dp-phy";
+                       reg = <0 0x088e8000 0 0x3000>;
 
                        clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
-                                <&rpmhcc RPMH_CXO_CLK>,
                                 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
-                                <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
-                       clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+                                <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+                                <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+                       clock-names = "aux",
+                                     "ref",
+                                     "com_aux",
+                                     "usb3_pipe";
 
                        resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
                                 <&gcc GCC_USB3_PHY_PRIM_BCR>;
                        reset-names = "phy", "common";
 
-                       usb_1_ssphy: phy@88e9200 {
-                               reg = <0 0x088e9200 0 0x200>,
-                                     <0 0x088e9400 0 0x200>,
-                                     <0 0x088e9c00 0 0x218>,
-                                     <0 0x088e9600 0 0x200>,
-                                     <0 0x088e9800 0 0x200>,
-                                     <0 0x088e9a00 0 0x100>;
-                               #clock-cells = <0>;
-                               #phy-cells = <0>;
-                               clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-                               clock-names = "pipe0";
-                               clock-output-names = "usb3_phy_pipe_clk_src";
-                       };
+                       #clock-cells = <1>;
+                       #phy-cells = <1>;
+
+                       status = "disabled";
                };
 
                usb_2_qmpphy: phy@88eb000 {
@@ -3606,7 +3596,7 @@
                                iommus = <&apps_smmu 0x140 0>;
                                snps,dis_u2_susphy_quirk;
                                snps,dis_enblslpm_quirk;
-                               phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+                               phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
                                phy-names = "usb2-phy", "usb3-phy";
                        };
                };
@@ -3941,8 +3931,8 @@
                                 <&mdss_dsi0_phy 1>,
                                 <&mdss_dsi1_phy 0>,
                                 <&mdss_dsi1_phy 1>,
-                                <0>,
-                                <0>;
+                                <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+                                <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
                        clock-names = "bi_tcxo",
                                      "dsi0_phy_pll_out_byteclk",
                                      "dsi0_phy_pll_out_dsiclk",