dt-bindings: input: Convert ChipOne ICN8318 binding to a schema

The ChipOne ICN8318 Touchscreen Controller is supported by Linux thanks
to its device tree binding.

Now that we have the DT validation in place, let's convert the device
tree bindings for that driver over to a YAML schema.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210721140424.725744-17-maxime@cerno.tech
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

diff --git a/Documentation/devicetree/bindings/input/touchscreen/chipone,icn8318.yaml b/Documentation/devicetree/bindings/input/touchscreen/chipone,icn8318.yaml
new file mode 100644 (file)
index 0000000..9df685b
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/chipone,icn8318.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/chipone,icn8318.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ChipOne ICN8318 Touchscreen Controller Device Tree Bindings
+
+maintainers:
+  - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    const: chipone,icn8318
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  wake-gpios:
+    maxItems: 1
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - wake-gpios
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@40 {
+            compatible = "chipone,icn8318";
+            reg = <0x40>;
+            interrupt-parent = <&pio>;
+            interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
+            pinctrl-names = "default";
+            pinctrl-0 = <&ts_wake_pin_p66>;
+            wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+            touchscreen-size-x = <800>;
+            touchscreen-size-y = <480>;
+            touchscreen-inverted-x;
+            touchscreen-swapped-x-y;
+        };
+    };
+
+...

diff --git a/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt b/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt
deleted file mode 100644 (file)
index 38b0603..0000000
--- a/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-* ChipOne icn8318 I2C touchscreen controller
-
-Required properties:
- - compatible            : "chipone,icn8318"
- - reg                   : I2C slave address of the chip (0x40)
- - interrupts            : interrupt specification for the icn8318 interrupt
- - wake-gpios            : GPIO specification for the WAKE input
- - touchscreen-size-x    : horizontal resolution of touchscreen (in pixels)
- - touchscreen-size-y    : vertical resolution of touchscreen (in pixels)
-
-Optional properties:
- - pinctrl-names         : should be "default"
- - pinctrl-0:            : a phandle pointing to the pin settings for the
-                           control gpios
- - touchscreen-fuzz-x    : horizontal noise value of the absolute input
-                           device (in pixels)
- - touchscreen-fuzz-y    : vertical noise value of the absolute input
-                           device (in pixels)
- - touchscreen-inverted-x : X axis is inverted (boolean)
- - touchscreen-inverted-y : Y axis is inverted (boolean)
- - touchscreen-swapped-x-y       : X and Y axis are swapped (boolean)
-                           Swapping is done after inverting the axis
-
-Example:
-
-i2c@00000000 {
-       /* ... */
-
-       chipone_icn8318@40 {
-               compatible = "chipone,icn8318";
-               reg = <0x40>;
-               interrupt-parent = <&pio>;
-               interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
-               pinctrl-names = "default";
-               pinctrl-0 = <&ts_wake_pin_p66>;
-               wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
-               touchscreen-size-x = <800>;
-               touchscreen-size-y = <480>;
-               touchscreen-inverted-x;
-               touchscreen-swapped-x-y;
-       };
-
-       /* ... */
-};