drivers/net: Remove leading spaces in Kconfig

Remove leading spaces before tabs in Kconfig file(s) by running the
following command:

  $ find drivers/net -name 'Kconfig*' | xargs sed -r -i 's/^[ ]+\t/\t/'

Signed-off-by: Juerg Haefliger <juergh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index fbbe7864363190136d95c22d4e09aefa10da8aa0..179308782888a6154aec745f18a0df4efe7759a8 100644 (file)
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -169,7 +169,7 @@ config USB_NET_AX8817X
          This option adds support for ASIX AX88xxx based USB 2.0
          10/100 Ethernet adapters.
 
-         This driver should work with at least the following devices:
+         This driver should work with at least the following devices:
            * Aten UC210T
            * ASIX AX88172
            * Billionton Systems, USB2AR
@@ -220,13 +220,13 @@ config USB_NET_CDCETHER
          CDC Ethernet is an implementation option for DOCSIS cable modems
          that support USB connectivity, used for non-Microsoft USB hosts.
          The Linux-USB CDC Ethernet Gadget driver is an open implementation.
-         This driver should work with at least the following devices:
+         This driver should work with at least the following devices:
 
            * Dell Wireless 5530 HSPA
-           * Ericsson PipeRider (all variants)
+           * Ericsson PipeRider (all variants)
            * Ericsson Mobile Broadband Module (all variants)
-           * Motorola (DM100 and SB4100)
-           * Broadcom Cable Modem (reference design)
+           * Motorola (DM100 and SB4100)
+           * Broadcom Cable Modem (reference design)
            * Toshiba (PCX1100U and F3507g/F3607gw)
            * ...
 

diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index 83c9481995dd2f07e10bf88668718101214dd090..473df2505c8eeed704180f47f595d0f362b00b59 100644 (file)
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -49,7 +49,7 @@ config COSA
          network device.
 
          You will need user-space utilities COSA or SRP boards for downloading
-         the firmware to the cards and to set them up. Look at the
+         the firmware to the cards and to set them up. Look at the
          <http://www.fi.muni.cz/~kas/cosa/> for more information. You can also
          read the comment at the top of the <file:drivers/net/wan/cosa.c> for
          details about the cards and the driver itself.
@@ -108,7 +108,7 @@ config HDLC
          Generic HDLC driver currently supports raw HDLC, Cisco HDLC, Frame
          Relay, synchronous Point-to-Point Protocol (PPP) and X.25.
 
-         To compile this driver as a module, choose M here: the
+         To compile this driver as a module, choose M here: the
          module will be called hdlc.
 
          If unsure, say N.