arm64: dts: qcom: sdm845: Add i2c-qcom-cci node

The sdm845 SOC ships with a CCI controller, which
has two CCI/I2C buses.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200324155843.10719-4-robert.foss@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index a2e05926b429110005e04794b59e3a614c663f1b..8644a2f6095a81a49e2db544e1906f82b710a536 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -866,3 +866,7 @@
                bias-pull-up;
        };
 };
+
+&cci {
+       status = "ok";
+};

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 8f926b5234d40c3ddfdf6abed4cce35a412b396a..f3eb1dc11ac630cc3e7592f251fb40ca82b6a850 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -5,6 +5,7 @@
  * Copyright (c) 2018, The Linux Foundation. All rights reserved.
  */
 
+#include <dt-bindings/clock/qcom,camcc-sdm845.h>
 #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
 #include <dt-bindings/clock/qcom,gcc-sdm845.h>
 #include <dt-bindings/clock/qcom,gpucc-sdm845.h>
@@ -1813,6 +1814,42 @@
                        gpio-ranges = <&tlmm 0 0 150>;
                        wakeup-parent = <&pdc_intc>;
 
+                       cci0_default: cci0-default {
+                               /* SDA, SCL */
+                               pins = "gpio17", "gpio18";
+                               function = "cci_i2c";
+
+                               bias-pull-up;
+                               drive-strength = <2>; /* 2 mA */
+                       };
+
+                       cci0_sleep: cci0-sleep {
+                               /* SDA, SCL */
+                               pins = "gpio17", "gpio18";
+                               function = "cci_i2c";
+
+                               drive-strength = <2>; /* 2 mA */
+                               bias-pull-down;
+                       };
+
+                       cci1_default: cci1-default {
+                               /* SDA, SCL */
+                               pins = "gpio19", "gpio20";
+                               function = "cci_i2c";
+
+                               bias-pull-up;
+                               drive-strength = <2>; /* 2 mA */
+                       };
+
+                       cci1_sleep: cci1-sleep {
+                               /* SDA, SCL */
+                               pins = "gpio19", "gpio20";
+                               function = "cci_i2c";
+
+                               drive-strength = <2>; /* 2 mA */
+                               bias-pull-down;
+                       };
+
                        qspi_clk: qspi-clk {
                                pinmux {
                                        pins = "gpio95";
@@ -3194,6 +3231,61 @@
                        #reset-cells = <1>;
                };
 
+               cci: cci@ac4a000 {
+                       compatible = "qcom,sdm845-cci";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       reg = <0 0x0ac4a000 0 0x4000>;
+                       interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+                       power-domains = <&clock_camcc TITAN_TOP_GDSC>;
+
+                       clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
+                               <&clock_camcc CAM_CC_SOC_AHB_CLK>,
+                               <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+                               <&clock_camcc CAM_CC_CPAS_AHB_CLK>,
+                               <&clock_camcc CAM_CC_CCI_CLK>,
+                               <&clock_camcc CAM_CC_CCI_CLK_SRC>;
+                       clock-names = "camnoc_axi",
+                               "soc_ahb",
+                               "slow_ahb_src",
+                               "cpas_ahb",
+                               "cci",
+                               "cci_src";
+
+                       assigned-clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
+                               <&clock_camcc CAM_CC_CCI_CLK>;
+                       assigned-clock-rates = <80000000>, <37500000>;
+
+                       pinctrl-names = "default", "sleep";
+                       pinctrl-0 = <&cci0_default &cci1_default>;
+                       pinctrl-1 = <&cci0_sleep &cci1_sleep>;
+
+                       status = "disabled";
+
+                       cci_i2c0: i2c-bus@0 {
+                               reg = <0>;
+                               clock-frequency = <1000000>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                       };
+
+                       cci_i2c1: i2c-bus@1 {
+                               reg = <1>;
+                               clock-frequency = <1000000>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                       };
+               };
+
+               clock_camcc: clock-controller@ad00000 {
+                       compatible = "qcom,sdm845-camcc";
+                       reg = <0 0x0ad00000 0 0x10000>;
+                       #clock-cells = <1>;
+                       #reset-cells = <1>;
+                       #power-domain-cells = <1>;
+               };
+
                mdss: mdss@ae00000 {
                        compatible = "qcom,sdm845-mdss";
                        reg = <0 0x0ae00000 0 0x1000>;