arm64: dts: imx8mm/n remove clock-names property from usb controller node

The clock-names property is not needed by usb controller node on imx8mm/n.
This will remove it.

Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 46473950e9263b44109f5a15a4353ff140d58f21..9535dedcef59b008d03fb14da75fa01c52be2d79 100644 (file)
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -1260,7 +1260,6 @@
                                reg = <0x32e40000 0x200>;
                                interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
                                clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
-                               clock-names = "usb1_ctrl_root_clk";
                                assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
                                assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
                                phys = <&usbphynop1>;
@@ -1281,7 +1280,6 @@
                                reg = <0x32e50000 0x200>;
                                interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
                                clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
-                               clock-names = "usb1_ctrl_root_clk";
                                assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
                                assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
                                phys = <&usbphynop2>;

diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index b901ee0d2d03f868870f7ae153292ca1c4489da9..a5f9cfb46e5dd76c7d8d7bde5915b746ce36ad02 100644 (file)
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -1220,7 +1220,6 @@
                                reg = <0x32e40000 0x200>;
                                interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
                                clocks = <&clk IMX8MN_CLK_USB1_CTRL_ROOT>;
-                               clock-names = "usb1_ctrl_root_clk";
                                assigned-clocks = <&clk IMX8MN_CLK_USB_BUS>;
                                assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>;
                                phys = <&usbphynop1>;