ARM: dts: BCM53573: Add DT for Luxul XAP-810

This is BCM53573 WiSoC based access point with an extra BCM43217 chipset
used for 2.4 GHz.

Signed-off-by: Dan Haab <dhaab@luxul.com>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 2d964c9b08eed288de69dc66097838b84935e128..5cac283865df557a617ab87cff22134a2eb24480 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -110,6 +110,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
        bcm953012hr.dtb \
        bcm953012k.dtb
 dtb-$(CONFIG_ARCH_BCM_53573) += \
+       bcm47189-luxul-xap-810.dtb \
        bcm47189-tenda-ac9.dtb \
        bcm947189acdbmr.dtb
 dtb-$(CONFIG_ARCH_BCM_63XX) += \

diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
new file mode 100644 (file)
index 0000000..214df18
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
@@ -0,0 +1,87 @@
+/*
+ * Copyright 2017 Luxul Inc.
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm53573.dtsi"
+
+/ {
+       compatible = "luxul,xap-810-v1", "brcm,bcm47189", "brcm,bcm53573";
+       model = "Luxul XAP-810 V1";
+
+       chosen {
+               bootargs = "earlycon";
+       };
+
+       memory {
+               reg = <0x00000000 0x08000000>;
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               5ghz {
+                       label = "bcm53xx:blue:5ghz";
+                       gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
+                       linux,default-trigger = "default-off";
+               };
+
+               system {
+                       label = "bcm53xx:green:system";
+                       gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+                       linux,default-trigger = "timer";
+               };
+       };
+
+       pcie0_leds {
+               compatible = "gpio-leds";
+
+               2ghz {
+                       label = "bcm53xx:blue:2ghz";
+                       gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
+                       linux,default-trigger = "default-off";
+               };
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys";
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               restart {
+                       label = "Reset";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&pcie0 {
+       ranges = <0x00000000 0 0 0 0 0x00100000>;
+       #address-cells = <3>;
+       #size-cells = <2>;
+
+       bridge@0,0,0 {
+               reg = <0x0000 0 0 0 0>;
+               ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
+               #address-cells = <3>;
+               #size-cells = <2>;
+
+               wifi@0,1,0 {
+                       reg = <0x0000 0 0 0 0>;
+                       ranges = <0x00000000 0 0 0 0x00100000>;
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       pcie0_chipcommon: chipcommon@0 {
+                               reg = <0 0x1000>;
+
+                               gpio-controller;
+                               #gpio-cells = <2>;
+                       };
+               };
+       };
+};