phy: phy-brcm-usb-init: DRD mode can cause crash on startup

This is caused by a bug in the BDC core. When the BDC core comes
out of reset and it's not selected, it gets a backup clock. When
the BDC core is selected, it get's the main clock. If HOST mode
is then selected the BDC core has the main clock shut off but
the backup clock is not restored.

The failure scenario and cause are as follows:
- DRD mode is active
- Device mode is selected first in bootloader
- When host mode is now selected, the clock to the BDC is cut off.
- BDC registers are inaccessible and therefore the BDC driver
  crashes upon Linux boot.

The fix is to have the phy driver always force a BDC reset on
startup.

Fixes: 49859e55e364 ("phy: usb: phy-brcm-usb: Add Broadcom STB USB phy driver")
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

diff --git a/drivers/phy/broadcom/phy-brcm-usb-init.c b/drivers/phy/broadcom/phy-brcm-usb-init.c
index 6672adcc5894f317434817805e480bf2cda537a1..1b7febc43da932628dc0223b8a37eac18320daa9 100644 (file)
--- a/drivers/phy/broadcom/phy-brcm-usb-init.c
+++ b/drivers/phy/broadcom/phy-brcm-usb-init.c
@@ -918,6 +918,7 @@ void brcm_usb_init_common(struct brcm_usb_init_params *params)
                        USB_CTRL_UNSET_FAMILY(params, USB_PM, BDC_SOFT_RESETB);
                        break;
                default:
+                       USB_CTRL_UNSET_FAMILY(params, USB_PM, BDC_SOFT_RESETB);
                        USB_CTRL_SET_FAMILY(params, USB_PM, BDC_SOFT_RESETB);
                break;
                }