ARM: dts: imx6ul-geam: Use #pwm-cells = <3> for imx27-pwm device

The binding dictates using 3 pwm-cells. Adhere to that.

This fixes the following dtbs_check warning:

	arch/arm/boot/dts/nxp/imx/imx6ul-geam.dtb: pwm@20fc000: #pwm-cells:0:0: 3 was expected
		from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts
index 2ca18f3dad0aa6576398235398047753a79b285b..cdbb8c435cd6aa54036b646a39f3fd7873aec0fb 100644 (file)
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts
@@ -21,7 +21,7 @@
 
        backlight {
                compatible = "pwm-backlight";
-               pwms = <&pwm8 0 100000>;
+               pwms = <&pwm8 0 100000 0>;
                brightness-levels = < 0  1  2  3  4  5  6  7  8  9
                                     10 11 12 13 14 15 16 17 18 19
                                     20 21 22 23 24 25 26 27 28 29
@@ -194,7 +194,6 @@
 };
 
 &pwm8 {
-       #pwm-cells = <2>;
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_pwm8>;
        status = "okay";