arm64: dts: renesas: Add Gray Hawk Single board support

Add initial support for the Renesas Gray Hawk Single board, which is
based on the R-Car V4M (R8A779H0) SoC:
  - Memory,
  - Crystal oscillators,
  - Serial console.

Based on the White Hawk Single DTS, and on a patch for the Gray Hawk
board stack in the BSP by Hai Pham.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/b657402113267acd57aece0b4c681b707e704455.1706194617.git.geert+renesas@glider.be

diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 1d7d69657a1f0559533cb62744d8bd085db4a897..4c5ac5f02829ff58c2f7bd94814cd242fa743d38 100644 (file)
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -89,6 +89,8 @@ dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g0-white-hawk-ard-audio-da7212.dtb
 
 dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g2-white-hawk-single.dtb
 
+dtb-$(CONFIG_ARCH_R8A779H0) += r8a779h0-gray-hawk-single.dtb
+
 dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-salvator-xs.dtb
 r8a779m1-salvator-xs-panel-aa104xd12-dtbs := r8a779m1-salvator-xs.dtb salvator-panel-aa104xd12.dtbo
 dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-salvator-xs-panel-aa104xd12.dtb

diff --git a/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts b/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts
new file mode 100644 (file)
index 0000000..1ed4047
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the R-Car V4M Gray Hawk Single board
+ *
+ * Copyright (C) 2023 Renesas Electronics Corp.
+ * Copyright (C) 2024 Glider bv
+ */
+
+/dts-v1/;
+#include "r8a779h0.dtsi"
+
+/ {
+       model = "Renesas Gray Hawk Single board based on r8a779h0";
+       compatible = "renesas,gray-hawk-single", "renesas,r8a779h0";
+
+       aliases {
+               serial0 = &hscif0;
+       };
+
+       chosen {
+               bootargs = "ignore_loglevel";
+               stdout-path = "serial0:921600n8";
+       };
+
+       memory@48000000 {
+               device_type = "memory";
+               /* first 128MB is reserved for secure area. */
+               reg = <0x0 0x48000000 0x0 0x78000000>;
+       };
+
+       memory@480000000 {
+               device_type = "memory";
+               reg = <0x4 0x80000000 0x1 0x80000000>;
+       };
+};
+
+&extal_clk {
+       clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+       clock-frequency = <32768>;
+};
+
+&hscif0 {
+       uart-has-rtscts;
+       status = "okay";
+};
+
+&scif_clk {
+       clock-frequency = <24000000>;
+};