i2c: rk3x: remove printout on handled timeouts

I2C and SMBus timeouts are not something the user needs to be informed
about on controller level. The client driver may know if that really is
a problem and give more detailed information to the user. The controller
should just pass this information upwards. Remove the printout.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index 086fdf262e7b60e26c48727f6f8f586615674117..8c7367f289d364faf9037f41bdd8e495ea1c528f 100644 (file)
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -1106,9 +1106,6 @@ static int rk3x_i2c_xfer_common(struct i2c_adapter *adap,
                spin_lock_irqsave(&i2c->lock, flags);
 
                if (timeout == 0) {
-                       dev_err(i2c->dev, "timeout, ipd: 0x%02x, state: %d\n",
-                               i2c_readl(i2c, REG_IPD), i2c->state);
-
                        /* Force a STOP condition without interrupt */
                        i2c_writel(i2c, 0, REG_IEN);
                        val = i2c_readl(i2c, REG_CON) & REG_CON_TUNING_MASK;