arm64: dts: msm8996: thermal: Add temperature sensors near major peripherals

msm8996 has a total of 21 temperature sensors. Populate DT with
information about them.

There are 2 sensors on each of the cpus - one on the top, the other
below (we only expose one on the top in DT for now). For the GPU, we
expose both, the one on the top and the one below.

Depending on the version of the silicon, sensor 2 is either placed near
the L3 cache or the venus video decoder. It would've been nice to be
able to be version-specific but we don't have DTs that differentiate the
two versions of silicon yet.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index c761269caf809d8b4961f49eb12c8107ab63df9d..e2408ee911845d7608afff26bee55f030cec065e 100644 (file)
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -237,6 +237,156 @@
                                };
                        };
                };
+
+               gpu-thermal-top {
+                       polling-delay-passive = <250>;
+                       polling-delay = <1000>;
+
+                       thermal-sensors = <&tsens1 6>;
+
+                       trips {
+                               gpu1_alert0: trip-point@0 {
+                                       temperature = <90000>;
+                                       hysteresis = <2000>;
+                                       type = "hot";
+                               };
+                       };
+               };
+
+               gpu-thermal-bottom {
+                       polling-delay-passive = <250>;
+                       polling-delay = <1000>;
+
+                       thermal-sensors = <&tsens1 7>;
+
+                       trips {
+                               gpu2_alert0: trip-point@0 {
+                                       temperature = <90000>;
+                                       hysteresis = <2000>;
+                                       type = "hot";
+                               };
+                       };
+               };
+
+               m4m-thermal {
+                       polling-delay-passive = <250>;
+                       polling-delay = <1000>;
+
+                       thermal-sensors = <&tsens0 1>;
+
+                       trips {
+                               m4m_alert0: trip-point@0 {
+                                       temperature = <90000>;
+                                       hysteresis = <2000>;
+                                       type = "hot";
+                               };
+                       };
+               };
+
+               l3-or-venus-thermal {
+                       polling-delay-passive = <250>;
+                       polling-delay = <1000>;
+
+                       thermal-sensors = <&tsens0 2>;
+
+                       trips {
+                               l3_or_venus_alert0: trip-point@0 {
+                                       temperature = <90000>;
+                                       hysteresis = <2000>;
+                                       type = "hot";
+                               };
+                       };
+               };
+
+               cluster0-l2-thermal {
+                       polling-delay-passive = <250>;
+                       polling-delay = <1000>;
+
+                       thermal-sensors = <&tsens0 7>;
+
+                       trips {
+                               cluster0_l2_alert0: trip-point@0 {
+                                       temperature = <90000>;
+                                       hysteresis = <2000>;
+                                       type = "hot";
+                               };
+                       };
+               };
+
+               cluster1-l2-thermal {
+                       polling-delay-passive = <250>;
+                       polling-delay = <1000>;
+
+                       thermal-sensors = <&tsens0 12>;
+
+                       trips {
+                               cluster1_l2_alert0: trip-point@0 {
+                                       temperature = <90000>;
+                                       hysteresis = <2000>;
+                                       type = "hot";
+                               };
+                       };
+               };
+
+               camera-thermal {
+                       polling-delay-passive = <250>;
+                       polling-delay = <1000>;
+
+                       thermal-sensors = <&tsens1 1>;
+
+                       trips {
+                               camera_alert0: trip-point@0 {
+                                       temperature = <90000>;
+                                       hysteresis = <2000>;
+                                       type = "hot";
+                               };
+                       };
+               };
+
+               q6-dsp-thermal {
+                       polling-delay-passive = <250>;
+                       polling-delay = <1000>;
+
+                       thermal-sensors = <&tsens1 2>;
+
+                       trips {
+                               q6_dsp_alert0: trip-point@0 {
+                                       temperature = <90000>;
+                                       hysteresis = <2000>;
+                                       type = "hot";
+                               };
+                       };
+               };
+
+               mem-thermal {
+                       polling-delay-passive = <250>;
+                       polling-delay = <1000>;
+
+                       thermal-sensors = <&tsens1 3>;
+
+                       trips {
+                               mem_alert0: trip-point@0 {
+                                       temperature = <90000>;
+                                       hysteresis = <2000>;
+                                       type = "hot";
+                               };
+                       };
+               };
+
+               modemtx-thermal {
+                       polling-delay-passive = <250>;
+                       polling-delay = <1000>;
+
+                       thermal-sensors = <&tsens1 4>;
+
+                       trips {
+                               modemtx_alert0: trip-point@0 {
+                                       temperature = <90000>;
+                                       hysteresis = <2000>;
+                                       type = "hot";
+                               };
+                       };
+               };
        };
 
        timer {