ARM: dts: qcom: replace status value "ok" by "okay"

While the DT parser recognizes "ok" as a valid value for the
"status" property, it is actually mentioned nowhere. Use the
proper value "okay" instead, as done in the majority of files
already.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Link: https://lore.kernel.org/r/20200830191643.20717-1-freifunk@adrianschmutzler.de
[bjorn: Rebased and included fixup of sdx55-mtp]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
index 4e6c50d45cb2bca5df186dc67f064e638f76a955..dace8ffeb99118cb09dc0c678be972fe3ba16ee2 100644 (file)
--- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
@@ -461,11 +461,11 @@
                };
 
                gsbi@19800000 {
-                       status = "ok";
+                       status = "okay";
                        qcom,mode = <GSBI_PROT_I2C>;
 
                        i2c@19880000 {
-                               status = "ok";
+                               status = "okay";
                                pinctrl-names = "default";
                                pinctrl-0 = <&dragon_gsbi8_i2c_pins>;
 
@@ -497,17 +497,17 @@
                };
 
                gsbi@19c00000 {
-                       status = "ok";
+                       status = "okay";
                        qcom,mode = <GSBI_PROT_I2C_UART>;
 
                        serial@19c40000 {
-                               status = "ok";
+                               status = "okay";
                                pinctrl-names = "default";
                                pinctrl-0 = <&dragon_gsbi12_serial_pins>;
                        };
 
                        i2c@19c80000 {
-                               status = "ok";
+                               status = "okay";
                                pinctrl-names = "default";
                                pinctrl-0 = <&dragon_gsbi12_i2c_pins>;
 
@@ -571,7 +571,7 @@
 
                external-bus@1a100000 {
                        /* The EBI2 will instantiate first, then populate its children */
-                       status = "ok";
+                       status = "okay";
                        pinctrl-names = "default";
                        pinctrl-0 = <&dragon_ebi2_pins>;
 

diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
index a701d4bac3205036c5dfd83bc927f37af4e83c0a..3bce47d16ab3d5831cc8678ce85cb2f4272e0487 100644 (file)
--- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
@@ -302,11 +302,11 @@
                };
 
                gsbi@16500000 {
-                       status = "ok";
+                       status = "okay";
                        qcom,mode = <GSBI_PROT_I2C_UART>;
 
                        serial@16540000 {
-                               status = "ok";
+                               status = "okay";
 
                                pinctrl-names = "default";
                                pinctrl-0 = <&gsbi6_uart_4pins>;
@@ -314,10 +314,10 @@
                };
 
                gsbi@16600000 {
-                       status = "ok";
+                       status = "okay";
                        qcom,mode = <GSBI_PROT_I2C_UART>;
                        serial@16640000 {
-                               status = "ok";
+                               status = "okay";
                        };
                };
 

diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
index 209eb21cea008f4c56a0c1ed29abf1153415c02e..0148148a8e0a5b5a2f5ad4d6acfc32627df9d405 100644 (file)
--- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
@@ -141,10 +141,10 @@
                };
 
                gsbi@16600000 {
-                       status = "ok";
+                       status = "okay";
                        qcom,mode = <GSBI_PROT_I2C_UART>;
                        serial@16640000 {
-                               status = "ok";
+                               status = "okay";
                                pinctrl-names = "default";
                                pinctrl-0 = <&gsbi7_uart_2pins>;
                        };
@@ -152,7 +152,7 @@
 
                /* OTG */
                usb@12500000 {
-                       status = "ok";
+                       status = "okay";
                        dr_mode = "otg";
                        ulpi {
                                phy {
@@ -209,7 +209,7 @@
                };
 
                pci@1b500000 {
-                       status = "ok";
+                       status = "okay";
                        vdda-supply = <&pm8921_s3>;
                        vdda_phy-supply = <&pm8921_lvs6>;
                        vdda_refclk-supply = <&v3p3_fixed>;

diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index 83aaf4a74398aa236e3d197fb70df50300867882..d0a17b5a5fa385662f27ba68380d02504cbf2873 100644 (file)
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -215,21 +215,21 @@
                };
 
                gsbi@16500000 {
-                       status = "ok";
+                       status = "okay";
                        qcom,mode = <GSBI_PROT_UART_W_FC>;
 
                        serial@16540000 {
-                               status = "ok";
+                               status = "okay";
                                pinctrl-names = "default";
                                pinctrl-0 = <&gsbi6_uart_4pins>;
                        };
                };
 
                gsbi@16600000 {
-                       status = "ok";
+                       status = "okay";
                        qcom,mode = <GSBI_PROT_I2C_UART>;
                        serial@16640000 {
-                               status = "ok";
+                               status = "okay";
                                pinctrl-names = "default";
                                pinctrl-0 = <&gsbi7_uart_2pins>;
                        };
@@ -279,7 +279,7 @@
                };
 
                pci@1b500000 {
-                       status = "ok";
+                       status = "okay";
                        vdda-supply = <&pm8921_s3>;
                        vdda_phy-supply = <&pm8921_lvs6>;
                        vdda_refclk-supply = <&ext_3p3v>;

diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
index 8bf488fb86ad5e233742f9c77b33c0a64d5e31c0..72e47bdc5c1245a3835e6e7a3443042f438272c9 100644 (file)
--- a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
@@ -362,11 +362,11 @@
                };
 
                gsbi@1a200000 {
-                       status = "ok";
+                       status = "okay";
                        qcom,mode = <GSBI_PROT_I2C_UART>;
 
                        serial@1a240000 {
-                               status = "ok";
+                               status = "okay";
 
                                pinctrl-names = "default";
                                pinctrl-0 = <&gsbi5_uart_pin_a>;

diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
index 244f04e19c9d9ebd4b2fde6ab6faf13ccce97390..83793b835d40b70c1fe481b0fd53d9d87bc28be5 100644 (file)
--- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
@@ -19,13 +19,13 @@
 
        soc {
                serial@f991e000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                sdhci@f9824900 {
                        bus-width = <8>;
                        non-removable;
-                       status = "ok";
+                       status = "okay";
 
                        vmmc-supply = <&pm8941_l20>;
                        vqmmc-supply = <&pm8941_s3>;
@@ -39,14 +39,14 @@
                        pinctrl-names = "default";
                        pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
                        bus-width = <4>;
-                       status = "ok";
+                       status = "okay";
 
                        vmmc-supply = <&pm8941_l21>;
                        vqmmc-supply = <&pm8941_l13>;
                };
 
                usb@f9a55000 {
-                       status = "ok";
+                       status = "okay";
                        phys = <&usb_hs2_phy>;
                        phy-select = <&tcsr 0xb000 1>;
                        extcon = <&smbb>, <&usb_id>;
@@ -56,7 +56,7 @@
                        adp-disable;
                        ulpi {
                                phy@b {
-                                       status = "ok";
+                                       status = "okay";
                                        v3p3-supply = <&pm8941_l24>;
                                        v1p8-supply = <&pm8941_l6>;
                                        extcon = <&smbb>;

diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
index 418f9a0223363b8053fac02be4e1b4f5bda8be33..c93b2164db44d823e13443ac28ad55323c13e8ea 100644 (file)
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
@@ -30,7 +30,7 @@
 
        soc {
                rng@22000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                pinctrl@1000000 {
@@ -66,13 +66,13 @@
                };
 
                blsp_dma: dma@7884000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                spi@78b5000 {
                        pinctrl-0 = <&spi_0_pins>;
                        pinctrl-names = "default";
-                       status = "ok";
+                       status = "okay";
                        cs-gpios = <&tlmm 54 0>;
 
                        mx25l25635e@0 {
@@ -87,27 +87,27 @@
                serial@78af000 {
                        pinctrl-0 = <&serial_pins>;
                        pinctrl-names = "default";
-                       status = "ok";
+                       status = "okay";
                };
 
                cryptobam: dma@8e04000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                crypto@8e3a000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                watchdog@b017000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                wifi@a000000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                wifi@a800000 {
-                       status = "ok";
+                       status = "okay";
                };
        };
 };

diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
index 7a96f300bc8d4569bf9f618f10ad32cfc3108ee1..b0f476ff017f94f2d4a31e65b89069261fc98e4c 100644 (file)
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
@@ -9,11 +9,11 @@
 
        soc {
                dma@7984000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                qpic-nand@79b0000 {
-                       status = "ok";
+                       status = "okay";
                };
        };
 };

diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
index 7c1eb1963c67d60cf3a51a438766e90eb43835de..7a337dc087417c2963ad96776313994064e93cd4 100644 (file)
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
@@ -70,23 +70,23 @@
                serial@78af000 {
                        pinctrl-0 = <&serial_0_pins>;
                        pinctrl-names = "default";
-                       status = "ok";
+                       status = "okay";
                };
 
                serial@78b0000 {
                        pinctrl-0 = <&serial_1_pins>;
                        pinctrl-names = "default";
-                       status = "ok";
+                       status = "okay";
                };
 
                dma@7884000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                spi@78b5000 { /* BLSP1 QUP1 */
                        pinctrl-0 = <&spi_0_pins>;
                        pinctrl-names = "default";
-                       status = "ok";
+                       status = "okay";
                        cs-gpios = <&tlmm 12 0>;
 
                        m25p80@0 {
@@ -99,7 +99,7 @@
                };
 
                pci@40000000 {
-                       status = "ok";
+                       status = "okay";
                        perst-gpio = <&tlmm 38 0x1>;
                };
 

diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
index 8c7ef6537ae6313b70de1867d9df6453bc20b5d4..f343a22443867219a83e8a59a33943016aa412b9 100644 (file)
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
@@ -9,12 +9,12 @@
 
        soc {
                pci@40000000 {
-                       status = "ok";
+                       status = "okay";
                        perst-gpio = <&tlmm 38 0x1>;
                };
 
                spi@78b6000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                pinctrl@1000000 {
@@ -43,13 +43,13 @@
                serial@78b0000 {
                        pinctrl-0 = <&serial_1_pins>;
                        pinctrl-names = "default";
-                       status = "ok";
+                       status = "okay";
                };
 
                spi@78b5000 {
                        pinctrl-0 = <&spi_0_pins>;
                        pinctrl-names = "default";
-                       status = "ok";
+                       status = "okay";
                        cs-gpios = <&tlmm 12 0>;
 
                        m25p80@0 {

diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts
index af7a9028d49223eba3c21d4d3fbf8278e6bb6b28..582acb681a98ed2e4007d5ed1cabfc8c2d242670 100644 (file)
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts
@@ -19,7 +19,7 @@
                serial@78b0000 {
                        pinctrl-0 = <&serial_1_pins>;
                        pinctrl-names = "default";
-                       status = "ok";
+                       status = "okay";
                };
        };
 };

diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
index 9f1a5a668772e09a8f310cb8ce7e5d501ef5c5c1..94872518b5a23f7d9cb8b5747240f33a29695103 100644 (file)
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
@@ -49,27 +49,27 @@
                serial@78af000 {
                        pinctrl-0 = <&serial_0_pins>;
                        pinctrl-names = "default";
-                       status = "ok";
+                       status = "okay";
                };
 
                dma@7884000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                i2c@78b7000 { /* BLSP1 QUP2 */
                        pinctrl-0 = <&i2c_0_pins>;
                        pinctrl-names = "default";
-                       status = "ok";
+                       status = "okay";
                };
 
                dma@7984000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                qpic-nand@79b0000 {
                        pinctrl-0 = <&nand_pins>;
                        pinctrl-names = "default";
-                       status = "ok";
+                       status = "okay";
                };
        };
 };

diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
index 554c65e7aa0ee433b2d07cc39f61451413987868..e5b9b9cf6097bb28268ccf3f53d7a2461acfe6cf 100644 (file)
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -24,7 +24,7 @@
 
                gsbi@16300000 {
                        i2c@16380000 {
-                               status = "ok";
+                               status = "okay";
                                clock-frequency = <200000>;
                                pinctrl-0 = <&i2c4_pins>;
                                pinctrl-names = "default";

diff --git a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
index e239a0486936317547464636e96564d0bab7fc32..65330065390af9c1e17bd3dd8339384cbe898966 100644 (file)
--- a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
@@ -16,19 +16,19 @@
        soc {
                gsbi@16300000 {
                        qcom,mode = <GSBI_PROT_I2C_UART>;
-                       status = "ok";
+                       status = "okay";
 
                        serial@16340000 {
-                               status = "ok";
+                               status = "okay";
                        };
                };
 
                gsbi5: gsbi@1a200000 {
                        qcom,mode = <GSBI_PROT_SPI>;
-                       status = "ok";
+                       status = "okay";
 
                        spi4: spi@1a280000 {
-                               status = "ok";
+                               status = "okay";
                                spi-max-frequency = <50000000>;
 
                                pinctrl-0 = <&spi_pins>;
@@ -57,12 +57,12 @@
                };
 
                sata-phy@1b400000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                sata@29000000 {
                        ports-implemented = <0x1>;
-                       status = "ok";
+                       status = "okay";
                };
 
                gpio_keys {

diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
index 26b034bd19d274bfa2264bca67a1325bfd7b2902..a725b73b5a2e31cb8bdffdad48a28a47203f274c 100644 (file)
--- a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
+++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
@@ -125,12 +125,12 @@
 };
 
 &gsbi3 {
-       status = "ok";
+       status = "okay";
        qcom,mode = <GSBI_PROT_SPI>;
 };
 
 &gsbi3_spi {
-       status = "ok";
+       status = "okay";
        pinctrl-0 = <&gsbi3_pins>;
        pinctrl-names = "default";
        assigned-clocks = <&gcc GSBI3_QUP_CLK>;
@@ -138,34 +138,34 @@
 };
 
 &gsbi4 {
-       status = "ok";
+       status = "okay";
        qcom,mode = <GSBI_PROT_UART_W_FC>;
 };
 
 &gsbi4_serial {
-       status = "ok";
+       status = "okay";
        pinctrl-0 = <&gsbi4_pins>;
        pinctrl-names = "default";
 };
 
 &gsbi5 {
-       status = "ok";
+       status = "okay";
        qcom,mode = <GSBI_PROT_I2C_UART>;
 };
 
 &gsbi5_i2c {
-       status = "ok";
+       status = "okay";
        clock-frequency = <200000>;
        pinctrl-0 = <&gsbi5_i2c_pins>;
        pinctrl-names = "default";
 };
 
 &gsbi5_serial {
-       status = "ok";
+       status = "okay";
        pinctrl-0 = <&gsbi5_uart_pins>;
        pinctrl-names = "default";
 };
 
 &sdcc1 {
-       status = "ok";
+       status = "okay";
 };

diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts
index f01a11b18d6aa7ee305ff16ebb9b109d2957d8a2..6a321ccb0bd07723a8b90c270964e90541490e25 100644 (file)
--- a/arch/arm/boot/dts/qcom-msm8660-surf.dts
+++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts
@@ -17,10 +17,10 @@
 
        soc {
                gsbi@19c00000 {
-                       status = "ok";
+                       status = "okay";
                        qcom,mode = <GSBI_PROT_I2C_UART>;
                        serial@19c40000 {
-                               status = "ok";
+                               status = "okay";
                        };
                };
 

diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
index 82d5d8267adfbd92e54b9280671fed0fd203d0d5..e7d2e937ea4cfa6ffb73cf92266763d4358e464f 100644 (file)
--- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
@@ -17,10 +17,10 @@
 
        soc {
                gsbi@16400000 {
-                       status = "ok";
+                       status = "okay";
                        qcom,mode = <GSBI_PROT_I2C_UART>;
                        serial@16440000 {
-                               status = "ok";
+                               status = "okay";
                        };
                };
 
@@ -273,12 +273,12 @@
                };
 
                gsbi@16000000 {
-                       status = "ok";
+                       status = "okay";
                        qcom,mode = <GSBI_PROT_SPI>;
                        pinctrl-names = "default";
                        pinctrl-0 = <&spi1_default>;
                        spi@16080000 {
-                               status = "ok";
+                               status = "okay";
                                eth@0 {
                                        compatible = "micrel,ks8851";
                                        reg = <0>;

diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
index d2d48770ec0fac6d7563f2767345dba81e3a878e..ea15b645b22995deabe0dbc528edfe76378e6887 100644 (file)
--- a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
@@ -256,11 +256,11 @@
 
 &soc {
        serial@f991e000 {
-               status = "ok";
+               status = "okay";
        };
 
        remoteproc@fb21b000 {
-               status = "ok";
+               status = "okay";
 
                vddmx-supply = <&pm8841_s1>;
                vddcx-supply = <&pm8841_s2>;
@@ -273,7 +273,7 @@
                        label = "pronto";
 
                        wcnss {
-                               status = "ok";
+                               status = "okay";
                        };
                };
        };
@@ -335,7 +335,7 @@
        };
 
        sdhci@f9824900 {
-               status = "ok";
+               status = "okay";
 
                vmmc-supply = <&pm8941_l20>;
                vqmmc-supply = <&pm8941_s3>;
@@ -348,7 +348,7 @@
        };
 
        sdhci@f98a4900 {
-               status = "ok";
+               status = "okay";
 
                vmmc-supply = <&pm8941_l21>;
                vqmmc-supply = <&pm8941_l13>;
@@ -360,7 +360,7 @@
        };
 
        usb@f9a55000 {
-               status = "ok";
+               status = "okay";
 
                phys = <&usb_hs1_phy>;
                phy-select = <&tcsr 0xb000 0>;
@@ -373,7 +373,7 @@
 
                ulpi {
                        phy@a {
-                               status = "ok";
+                               status = "okay";
 
                                v1p8-supply = <&pm8941_l6>;
                                v3p3-supply = <&pm8941_l24>;

diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
index e769f638f2052fbe0828c27ebc8e14b1e3d3f4b2..0cda654371ae78e007659e4223c1d8a6dad6b316 100644 (file)
--- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -239,7 +239,7 @@
 
 &soc {
        serial@f991d000 {
-               status = "ok";
+               status = "okay";
        };
 
        pinctrl@fd510000 {
@@ -410,7 +410,7 @@
        };
 
        sdhci@f9824900 {
-               status = "ok";
+               status = "okay";
 
                vmmc-supply = <&pm8941_l20>;
                vqmmc-supply = <&pm8941_s3>;
@@ -423,7 +423,7 @@
        };
 
        sdhci@f98a4900 {
-               status = "ok";
+               status = "okay";
 
                max-frequency = <100000000>;
                bus-width = <4>;
@@ -471,7 +471,7 @@
        };
 
        serial@f9960000 {
-               status = "ok";
+               status = "okay";
 
                pinctrl-names = "default";
                pinctrl-0 = <&blsp2_uart10_pin_a>;
@@ -490,7 +490,7 @@
        };
 
        i2c@f9967000 {
-               status = "ok";
+               status = "okay";
                pinctrl-names = "default";
                pinctrl-0 = <&i2c11_pins>;
                clock-frequency = <355000>;
@@ -498,7 +498,7 @@
 
                led-controller@38 {
                        compatible = "ti,lm3630a";
-                       status = "ok";
+                       status = "okay";
                        reg = <0x38>;
 
                        #address-cells = <1>;
@@ -514,7 +514,7 @@
        };
 
        i2c@f9968000 {
-               status = "ok";
+               status = "okay";
                pinctrl-names = "default";
                pinctrl-0 = <&i2c12_pins>;
                clock-frequency = <100000>;
@@ -551,7 +551,7 @@
        };
 
        i2c@f9923000 {
-               status = "ok";
+               status = "okay";
                pinctrl-names = "default";
                pinctrl-0 = <&i2c1_pins>;
                clock-frequency = <100000>;
@@ -585,7 +585,7 @@
        };
 
        i2c@f9924000 {
-               status = "ok";
+               status = "okay";
 
                clock-frequency = <355000>;
                qcom,src-freq = <50000000>;
@@ -620,7 +620,7 @@
        };
 
        i2c@f9925000 {
-               status = "ok";
+               status = "okay";
                pinctrl-names = "default";
                pinctrl-0 = <&i2c3_pins>;
                clock-frequency = <100000>;
@@ -638,7 +638,7 @@
        };
 
        usb@f9a55000 {
-               status = "ok";
+               status = "okay";
 
                phys = <&usb_hs1_phy>;
                phy-select = <&tcsr 0xb000 0>;
@@ -652,7 +652,7 @@
 
                ulpi {
                        phy@a {
-                               status = "ok";
+                               status = "okay";
 
                                v1p8-supply = <&pm8941_l6>;
                                v3p3-supply = <&pm8941_l24>;
@@ -663,14 +663,14 @@
        };
 
        mdss@fd900000 {
-               status = "ok";
+               status = "okay";
 
                mdp@fd900000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                dsi@fd922800 {
-                       status = "ok";
+                       status = "okay";
 
                        vdda-supply = <&pm8941_l2>;
                        vdd-supply = <&pm8941_lvs3>;
@@ -704,7 +704,7 @@
                };
 
                dsi-phy@fd922a00 {
-                       status = "ok";
+                       status = "okay";
 
                        vddio-supply = <&pm8941_l12>;
                };

diff --git a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
index f23d1002b8f8b92655f17d51dc17a349e124b3ff..3929c9435e29e992a7ca15348ddaae6e269e917f 100644 (file)
--- a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
@@ -303,7 +303,7 @@
 
 &soc {
        serial@f991e000 {
-               status = "ok";
+               status = "okay";
        };
 
        gpio-keys {
@@ -456,7 +456,7 @@
        };
 
        sdhc_1: sdhci@f9824900 {
-               status = "ok";
+               status = "okay";
 
                vmmc-supply = <&pma8084_l20>;
                vqmmc-supply = <&pma8084_s4>;
@@ -469,7 +469,7 @@
        };
 
        sdhc_2: sdhci@f9864900 {
-               status = "ok";
+               status = "okay";
 
                max-frequency = <100000000>;
 
@@ -518,7 +518,7 @@
        };
 
        usb@f9a55000 {
-               status = "ok";
+               status = "okay";
 
                phys = <&usb_hs1_phy>;
                phy-select = <&tcsr 0xb000 0>;
@@ -531,7 +531,7 @@
 
                ulpi {
                        phy@a {
-                               status = "ok";
+                               status = "okay";
 
                                v1p8-supply = <&pma8084_l6>;
                                v3p3-supply = <&pma8084_l24>;

diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts
index 5669f5f58a866f6a1f8ea3c3a329c45d8652f8be..398a3eaf306b4ef6fed69ac68be8060b4027148d 100644 (file)
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts
@@ -261,7 +261,7 @@
 
 &soc {
        sdhci@f9824900 {
-               status = "ok";
+               status = "okay";
 
                vmmc-supply = <&pm8941_l20>;
                vqmmc-supply = <&pm8941_s3>;
@@ -274,7 +274,7 @@
        };
 
        sdhci@f98a4900 {
-               status = "ok";
+               status = "okay";
 
                bus-width = <4>;
 
@@ -288,7 +288,7 @@
        };
 
        serial@f991e000 {
-               status = "ok";
+               status = "okay";
 
                pinctrl-names = "default";
                pinctrl-0 = <&blsp1_uart2_pin_a>;
@@ -366,7 +366,7 @@
        };
 
        usb@f9a55000 {
-               status = "ok";
+               status = "okay";
 
                phys = <&usb_hs1_phy>;
                phy-select = <&tcsr 0xb000 0>;
@@ -379,7 +379,7 @@
 
                ulpi {
                        phy@a {
-                               status = "ok";
+                               status = "okay";
 
                                v1p8-supply = <&pm8941_l6>;
                                v3p3-supply = <&pm8941_l24>;
@@ -415,7 +415,7 @@
                };
 
                coincell@2800 {
-                       status = "ok";
+                       status = "okay";
                        qcom,rset-ohms = <2100>;
                        qcom,vset-millivolts = <3000>;
                };
@@ -423,7 +423,7 @@
 
        pm8941@1 {
                wled@d800 {
-                       status = "ok";
+                       status = "okay";
 
                        qcom,cs-out;
                        qcom,current-limit = <20>;

diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts
index 701b396719c74aaaf8284f8cc2cac37b477f60be..f4ec08f1300375ce07ed0fca6a625ad3d17a38e6 100644 (file)
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts
@@ -279,7 +279,7 @@
 
 &soc {
        sdhci@f9824900 {
-               status = "ok";
+               status = "okay";
 
                vmmc-supply = <&pm8941_l20>;
                vqmmc-supply = <&pm8941_s3>;
@@ -292,7 +292,7 @@
        };
 
        sdhci@f9864900 {
-               status = "ok";
+               status = "okay";
 
                max-frequency = <100000000>;
                non-removable;
@@ -316,7 +316,7 @@
        };
 
        sdhci@f98a4900 {
-               status = "ok";
+               status = "okay";
 
                bus-width = <4>;
 
@@ -330,14 +330,14 @@
        };
 
        serial@f991e000 {
-               status = "ok";
+               status = "okay";
 
                pinctrl-names = "default";
                pinctrl-0 = <&blsp1_uart2_pin_a>;
        };
 
        usb@f9a55000 {
-               status = "ok";
+               status = "okay";
 
                phys = <&usb_hs1_phy>;
                phy-select = <&tcsr 0xb000 0>;
@@ -350,7 +350,7 @@
 
                ulpi {
                        phy@a {
-                               status = "ok";
+                               status = "okay";
 
                                v1p8-supply = <&pm8941_l6>;
                                v3p3-supply = <&pm8941_l24>;
@@ -482,7 +482,7 @@
        };
 
        i2c@f9964000 {
-               status = "ok";
+               status = "okay";
 
                clock-frequency = <355000>;
                qcom,src-freq = <50000000>;
@@ -522,7 +522,7 @@
        };
 
        i2c@f9967000 {
-               status = "ok";
+               status = "okay";
                pinctrl-names = "default";
                pinctrl-0 = <&i2c11_pins>;
                clock-frequency = <355000>;
@@ -635,7 +635,7 @@
                };
 
                coincell@2800 {
-                       status = "ok";
+                       status = "okay";
                        qcom,rset-ohms = <2100>;
                        qcom,vset-millivolts = <3000>;
                };

diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
index 611bae9fe66b56d0419e4fe8d8e6333f0de3567d..9743beebd84d08654b9b4d89aeaceee60ef817b2 100644 (file)
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
@@ -261,7 +261,7 @@
 
 &soc {
        usb@f9a55000 {
-               status = "ok";
+               status = "okay";
 
                phys = <&usb_hs1_phy>;
                phy-select = <&tcsr 0xb000 0>;
@@ -274,7 +274,7 @@
 
                ulpi {
                        phy@a {
-                               status = "ok";
+                               status = "okay";
 
                                v1p8-supply = <&pm8941_l6>;
                                v3p3-supply = <&pm8941_l24>;
@@ -286,7 +286,7 @@
        };
 
        sdhci@f9824900 {
-               status = "ok";
+               status = "okay";
 
                vmmc-supply = <&pm8941_l20>;
                vqmmc-supply = <&pm8941_s3>;
@@ -299,7 +299,7 @@
        };
 
        sdhci@f98a4900 {
-               status = "ok";
+               status = "okay";
 
                bus-width = <4>;
 
@@ -313,14 +313,14 @@
        };
 
        serial@f991e000 {
-               status = "ok";
+               status = "okay";
 
                pinctrl-names = "default";
                pinctrl-0 = <&blsp1_uart2_pin_a>;
        };
 
        i2c@f9924000 {
-               status = "ok";
+               status = "okay";
 
                clock-frequency = <355000>;
                qcom,src-freq = <50000000>;
@@ -464,7 +464,7 @@
                };
 
                coincell@2800 {
-                       status = "ok";
+                       status = "okay";
                        qcom,rset-ohms = <2100>;
                        qcom,vset-millivolts = <3000>;
                };
@@ -472,7 +472,7 @@
 
        pm8941@1 {
                wled@d800 {
-                       status = "ok";
+                       status = "okay";
 
                        qcom,cs-out;
                        qcom,current-limit = <20>;

diff --git a/arch/arm/boot/dts/qcom-sdx55-mtp.dts b/arch/arm/boot/dts/qcom-sdx55-mtp.dts
index 7fec5e7a2724c5d6de62f0827bfdfed71dabff34..9649c1e11311b2434c3bbf5f2f24fc29523a3377 100644 (file)
--- a/arch/arm/boot/dts/qcom-sdx55-mtp.dts
+++ b/arch/arm/boot/dts/qcom-sdx55-mtp.dts
@@ -210,15 +210,15 @@
 };
 
 &blsp1_uart3 {
-       status = "ok";
+       status = "okay";
 };
 
 &qpic_bam {
-       status = "ok";
+       status = "okay";
 };
 
 &qpic_nand {
-       status = "ok";
+       status = "okay";
 
        nand@0 {
                reg = <0>;