riscv: dts: microchip: remove pcie node from the sev kit

The SEV kit reference design does not hook up the PCIe root port to the
core complex including it is misleading.
The entry is a re-use mistake - I was not aware of this when I moved
the PCIe node out of mpfs.dtsi so that individual bistreams could
connect it to different fics etc.

The node is disabled, so there should be no functional change here.

Fixes: 978a17d1a688 ("riscv: dts: microchip: add sevkit device tree")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

diff --git a/arch/riscv/boot/dts/microchip/mpfs-sev-kit-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-sev-kit-fabric.dtsi
index 8545baf4d1290b49251fbf60c8739520e631bbb8..39a77df489abf51ff36adad685f8ef68805e10d8 100644 (file)
--- a/arch/riscv/boot/dts/microchip/mpfs-sev-kit-fabric.dtsi
+++ b/arch/riscv/boot/dts/microchip/mpfs-sev-kit-fabric.dtsi
@@ -13,33 +13,4 @@
                #clock-cells = <0>;
                clock-frequency = <125000000>;
        };
-
-       pcie: pcie@2000000000 {
-               compatible = "microchip,pcie-host-1.0";
-               #address-cells = <0x3>;
-               #interrupt-cells = <0x1>;
-               #size-cells = <0x2>;
-               device_type = "pci";
-               reg = <0x20 0x0 0x0 0x8000000>, <0x0 0x43000000 0x0 0x10000>;
-               reg-names = "cfg", "apb";
-               bus-range = <0x0 0x7f>;
-               interrupt-parent = <&plic>;
-               interrupts = <119>;
-               interrupt-map = <0 0 0 1 &pcie_intc 0>,
-                               <0 0 0 2 &pcie_intc 1>,
-                               <0 0 0 3 &pcie_intc 2>,
-                               <0 0 0 4 &pcie_intc 3>;
-               interrupt-map-mask = <0 0 0 7>;
-               clocks = <&fabric_clk1>, <&fabric_clk1>, <&fabric_clk3>;
-               clock-names = "fic0", "fic1", "fic3";
-               ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>;
-               msi-parent = <&pcie>;
-               msi-controller;
-               status = "disabled";
-               pcie_intc: interrupt-controller {
-                       #address-cells = <0>;
-                       #interrupt-cells = <1>;
-                       interrupt-controller;
-               };
-       };
 };