usb: chipidea: add workaround for chipidea PEC bug
authorXu Yang <xu.yang_2@nxp.com>
Wed, 9 Aug 2023 02:44:32 +0000 (10:44 +0800)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Wed, 9 Aug 2023 12:16:06 +0000 (14:16 +0200)
Some NXP processors using ChipIdea USB IP have a bug when frame babble is
detected.

Issue description:
In USB camera test, our controller is host in HS mode. In ISOC IN, when
device sends data across the micro frame, it causes the babble in host
controller. This will clear the PE bit. In spec, it also requires to set
the PEC bit and then set the PCI bit. Without the PCI interrupt, the
software does not know the PE is cleared.

This will add a flag CI_HDRC_HAS_PORTSC_PEC_MISSED to some impacted
platform datas. And the ehci host driver will assert PEC by SW when
specific conditions are satisfied.

Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20230809024432.535160-2-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/usb/chipidea/ci.h
drivers/usb/chipidea/ci_hdrc_imx.c
drivers/usb/chipidea/core.c
drivers/usb/chipidea/host.c
include/linux/usb/chipidea.h

index d262b9df7b3d3a4c79b578871b4f210b40f112f6..d9bb3d3f026e68cae40de5dee4fa9d81ed391f10 100644 (file)
@@ -257,6 +257,7 @@ struct ci_hdrc {
        bool                            id_event;
        bool                            b_sess_valid_event;
        bool                            imx28_write_fix;
+       bool                            has_portsc_pec_bug;
        bool                            supports_runtime_pm;
        bool                            in_lpm;
        bool                            wakeup_int;
index 772bbdade99457bbd7e76606eed164299c040350..e28bb2f2612dc60a1760a1aafe27dca9d2aeb26b 100644 (file)
@@ -68,11 +68,13 @@ static const struct ci_hdrc_imx_platform_flag imx7d_usb_data = {
 
 static const struct ci_hdrc_imx_platform_flag imx7ulp_usb_data = {
        .flags = CI_HDRC_SUPPORTS_RUNTIME_PM |
+               CI_HDRC_HAS_PORTSC_PEC_MISSED |
                CI_HDRC_PMQOS,
 };
 
 static const struct ci_hdrc_imx_platform_flag imx8ulp_usb_data = {
-       .flags = CI_HDRC_SUPPORTS_RUNTIME_PM,
+       .flags = CI_HDRC_SUPPORTS_RUNTIME_PM |
+               CI_HDRC_HAS_PORTSC_PEC_MISSED,
 };
 
 static const struct of_device_id ci_hdrc_imx_dt_ids[] = {
index 6e1196b532539b7aa54061c36313eea0548a0642..7ac39a281b8cb58ba1c5fa085fdfb445606326f6 100644 (file)
@@ -1044,6 +1044,8 @@ static int ci_hdrc_probe(struct platform_device *pdev)
                CI_HDRC_IMX28_WRITE_FIX);
        ci->supports_runtime_pm = !!(ci->platdata->flags &
                CI_HDRC_SUPPORTS_RUNTIME_PM);
+       ci->has_portsc_pec_bug = !!(ci->platdata->flags &
+               CI_HDRC_HAS_PORTSC_PEC_MISSED);
        platform_set_drvdata(pdev, ci);
 
        ret = hw_device_init(ci, base);
index ebe7400243b127baf9c503b0060b80f9c33b6541..08af26b762a2d6c083c6a52af4dcd4e93285f5ae 100644 (file)
@@ -151,6 +151,7 @@ static int host_start(struct ci_hdrc *ci)
        ehci->has_hostpc = ci->hw_bank.lpm;
        ehci->has_tdi_phy_lpm = ci->hw_bank.lpm;
        ehci->imx28_write_fix = ci->imx28_write_fix;
+       ehci->has_ci_pec_bug = ci->has_portsc_pec_bug;
 
        priv = (struct ehci_ci_priv *)ehci->priv;
        priv->reg_vbus = NULL;
index ee38835ed77cc4bd2b43425fffbaff280c3ab881..0b4f2d5faa080dfd122a051d8fde6b706fe6c61f 100644 (file)
@@ -63,6 +63,7 @@ struct ci_hdrc_platform_data {
 #define CI_HDRC_IMX_IS_HSIC            BIT(14)
 #define CI_HDRC_PMQOS                  BIT(15)
 #define CI_HDRC_PHY_VBUS_CONTROL       BIT(16)
+#define CI_HDRC_HAS_PORTSC_PEC_MISSED  BIT(17)
        enum usb_dr_mode        dr_mode;
 #define CI_HDRC_CONTROLLER_RESET_EVENT         0
 #define CI_HDRC_CONTROLLER_STOPPED_EVENT       1