ARM: dts: sunxi: Remove useless pinctrl nodes

We have for the H3 boards some kind of cargo cult apparently, where we
would have a pinctrl node even for GPIOs without any particular settings.

This is pretty much useless, so let's remove them.

Acked-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
index f110ee3822398eae337c2e435e9a06375163754e..ec2a05ff4b96f04dbb3dababe35c7be6f790e4e8 100644 (file)
--- a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
@@ -59,8 +59,6 @@
 
        leds {
                compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&leds_npi>, <&leds_r_npi>;
 
                status {
                        label = "nanopi:blue:status";
@@ -78,8 +76,6 @@
        r_gpio_keys {
                compatible = "gpio-keys";
                input-name = "k1";
-               pinctrl-names = "default";
-               pinctrl-0 = <&sw_r_npi>;
 
                k1 {
                        label = "k1";
@@ -104,25 +100,6 @@
        status = "okay";
 };
 
-&pio {
-       leds_npi: led_pins {
-               pins = "PA10";
-               function = "gpio_out";
-       };
-};
-
-&r_pio {
-       leds_r_npi: led_pins {
-               pins = "PL10";
-               function = "gpio_out";
-       };
-
-       sw_r_npi: key_pins {
-               pins = "PL3";
-               function = "gpio_in";
-       };
-};
-
 &uart0 {
        pinctrl-names = "default";
        pinctrl-0 = <&uart0_pins_a>;

diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
index f1fc6bdca8be711d0ba0b03fc22c551754db1f92..aa994e4a4abcf0016b8f202b19b9ab7f9c4433f4 100644 (file)
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
@@ -75,8 +75,6 @@
 
        leds {
                compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&leds_opc>, <&leds_r_opc>;
 
                status_led {
                        label = "orangepi:red:status";
@@ -92,8 +90,6 @@
 
        r_gpio_keys {
                compatible = "gpio-keys";
-               pinctrl-names = "default";
-               pinctrl-0 = <&sw_r_opc>;
 
                sw2 {
                        label = "sw2";
@@ -110,8 +106,6 @@
 
        wifi_pwrseq: wifi_pwrseq {
                compatible = "mmc-pwrseq-simple";
-               pinctrl-names = "default";
-               pinctrl-0 = <&wifi_pwrseq_pin_orangepi>;
                reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 WIFI_EN */
        };
 };
@@ -179,30 +173,6 @@
        };
 };
 
-&pio {
-       leds_opc: led_pins {
-               pins = "PA15";
-               function = "gpio_out";
-       };
-};
-
-&r_pio {
-       leds_r_opc: led_pins {
-               pins = "PL10";
-               function = "gpio_out";
-       };
-
-       sw_r_opc: key_pins {
-               pins = "PL3", "PL4";
-               function = "gpio_in";
-       };
-
-       wifi_pwrseq_pin_orangepi: wifi_pwrseq_pin {
-               pins = "PL7";
-               function = "gpio_out";
-       };
-};
-
 &reg_usb1_vbus {
        gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
        status = "okay";

diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts
index 476ae8e387ca2ba3f7223213ffa1f4adbae88203..34d8e5d236c9969080205877929a339c1aaff456 100644 (file)
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts
@@ -74,8 +74,6 @@
 
        leds {
                compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&leds_opc>, <&leds_r_opc>;
 
                pwr_led {
                        label = "orangepi:green:pwr";
@@ -91,8 +89,6 @@
 
        r_gpio_keys {
                compatible = "gpio-keys";
-               pinctrl-names = "default";
-               pinctrl-0 = <&sw_r_opc>;
 
                sw4 {
                        label = "sw4";
@@ -160,25 +156,6 @@
        status = "okay";
 };
 
-&pio {
-       leds_opc: led_pins {
-               pins = "PA15";
-               function = "gpio_out";
-       };
-};
-
-&r_pio {
-       leds_r_opc: led_pins {
-               pins = "PL10";
-               function = "gpio_out";
-       };
-
-       sw_r_opc: key_pins {
-               pins = "PL3";
-               function = "gpio_in";
-       };
-};
-
 &uart0 {
        pinctrl-names = "default";
        pinctrl-0 = <&uart0_pins_a>;

diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
index 245fd658defbc698bf5f77fe96d8e946c37851b3..a0026e03c29539c2384252d5c9003d03b7646ed8 100644 (file)
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
@@ -73,8 +73,6 @@
 
        leds {
                compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&leds_opc>, <&leds_r_opc>;
 
                pwr_led {
                        label = "orangepi:green:pwr";
@@ -90,8 +88,6 @@
 
        r_gpio_keys {
                compatible = "gpio-keys";
-               pinctrl-names = "default";
-               pinctrl-0 = <&sw_r_opc>;
 
                sw4 {
                        label = "sw4";
@@ -166,25 +162,6 @@
        status = "okay";
 };
 
-&pio {
-       leds_opc: led_pins {
-               pins = "PA15";
-               function = "gpio_out";
-       };
-};
-
-&r_pio {
-       leds_r_opc: led_pins {
-               pins = "PL10";
-               function = "gpio_out";
-       };
-
-       sw_r_opc: key_pins {
-               pins = "PL3";
-               function = "gpio_in";
-       };
-};
-
 &reg_usb0_vbus {
        gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
        status = "okay";

diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
index 46240334128f29bf24e79650d514ad8e1b27c1af..22393c135f06d09571aa986805800a3d7f64eba6 100644 (file)
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
@@ -73,8 +73,6 @@
 
        leds {
                compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&leds_opc>, <&leds_r_opc>;
 
                pwr_led {
                        label = "orangepi:green:pwr";
@@ -90,8 +88,6 @@
 
        r_gpio_keys {
                compatible = "gpio-keys";
-               pinctrl-names = "default";
-               pinctrl-0 = <&sw_r_opc>;
 
                sw4 {
                        label = "sw4";
@@ -179,13 +175,6 @@
        status = "okay";
 };
 
-&pio {
-       leds_opc: led_pins {
-               pins = "PA15";
-               function = "gpio_out";
-       };
-};
-
 &r_i2c {
        status = "okay";
 
@@ -210,18 +199,6 @@
        };
 };
 
-&r_pio {
-       leds_r_opc: led_pins {
-               pins = "PL10";
-               function = "gpio_out";
-       };
-
-       sw_r_opc: key_pins {
-               pins = "PL3";
-               function = "gpio_in";
-       };
-};
-
 &reg_usb0_vbus {
        gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
        status = "okay";

diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
index ac8438c2cff19f8ea0c48d3d69cabeac7e10facf..97f497854e05d26819a692139f0a1e336c8de9a1 100644 (file)
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
@@ -63,8 +63,6 @@
 
        reg_usb3_vbus: usb3-vbus {
                compatible = "regulator-fixed";
-               pinctrl-names = "default";
-               pinctrl-0 = <&usb3_vbus_pin_a>;
                regulator-name = "usb3-vbus";
                regulator-min-microvolt = <5000000>;
                regulator-max-microvolt = <5000000>;
@@ -116,13 +114,6 @@
        bias-pull-up;
 };
 
-&pio {
-       usb3_vbus_pin_a: usb3_vbus_pin {
-               pins = "PG11";
-               function = "gpio_out";
-       };
-};
-
 &r_i2c {
        status = "okay";