arm64: dts: qcom: sa8775p-ride: add the second SGMII PHY

Add a second SGMII PHY that will be used by EMAC1 on sa8775p-ride.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230810080909.6259-7-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
index fa32190a960f5cfcc6dcc284310685ee1b659127..bcf4101622dc936171b85c6107c79ce565094a84 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
+++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
@@ -287,6 +287,15 @@
                        reset-assert-us = <11000>;
                        reset-deassert-us = <70000>;
                };
+
+               sgmii_phy1: phy@a {
+                       compatible = "ethernet-phy-id0141.0dd4";
+                       reg = <0xa>;
+                       device_type = "ethernet-phy";
+                       reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>;
+                       reset-assert-us = <11000>;
+                       reset-deassert-us = <70000>;
+               };
        };
 
        mtl_rx_setup: rx-queues-config {