arm64: use both ZONE_DMA and ZONE_DMA32

So far all arm64 devices have supported 32 bit DMA masks for their
peripherals. This is not true anymore for the Raspberry Pi 4 as most of
it's peripherals can only address the first GB of memory on a total of
up to 4 GB.

This goes against ZONE_DMA32's intent, as it's expected for ZONE_DMA32
to be addressable with a 32 bit mask. So it was decided to re-introduce
ZONE_DMA in arm64.

ZONE_DMA will contain the lower 1G of memory, which is currently the
memory area addressable by any peripheral on an arm64 device.
ZONE_DMA32 will contain the rest of the 32 bit addressable memory.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 950a56b71ff0dc2d59f0c918606c5b467e1b7967..1b6ea5a9d1a67f9bc75ee840d0d640cdc23469cd 100644 (file)
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -266,6 +266,10 @@ config GENERIC_CSUM
 config GENERIC_CALIBRATE_DELAY
        def_bool y
 
+config ZONE_DMA
+       bool "Support DMA zone" if EXPERT
+       default y
+
 config ZONE_DMA32
        bool "Support DMA32 zone" if EXPERT
        default y

diff --git a/arch/arm64/include/asm/page.h b/arch/arm64/include/asm/page.h
index d39ddb258a04958ffdd72906dc77b4bd02484ea9..7b8c98830101e8a864e20cd3ada05dd71626b216 100644 (file)
--- a/arch/arm64/include/asm/page.h
+++ b/arch/arm64/include/asm/page.h
@@ -38,4 +38,6 @@ extern int pfn_valid(unsigned long);
 
 #include <asm-generic/getorder.h>
 
+#define ARCH_ZONE_DMA_BITS 30
+
 #endif

diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
index 8e9bc64c587855143deb95fbbae1ef31de3df3f9..44f07fdf7a596d76ed7685c58624a78bf6e0529e 100644 (file)
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -56,6 +56,13 @@ EXPORT_SYMBOL(physvirt_offset);
 struct page *vmemmap __ro_after_init;
 EXPORT_SYMBOL(vmemmap);
 
+/*
+ * We create both ZONE_DMA and ZONE_DMA32. ZONE_DMA covers the first 1G of
+ * memory as some devices, namely the Raspberry Pi 4, have peripherals with
+ * this limited view of the memory. ZONE_DMA32 will cover the rest of the 32
+ * bit addressable memory area.
+ */
+phys_addr_t arm64_dma_phys_limit __ro_after_init;
 phys_addr_t arm64_dma32_phys_limit __ro_after_init;
 
 #ifdef CONFIG_KEXEC_CORE
@@ -169,15 +176,16 @@ static void __init reserve_elfcorehdr(void)
 {
 }
 #endif /* CONFIG_CRASH_DUMP */
+
 /*
- * Return the maximum physical address for ZONE_DMA32 (DMA_BIT_MASK(32)). It
- * currently assumes that for memory starting above 4G, 32-bit devices will
- * use a DMA offset.
+ * Return the maximum physical address for a zone with a given address size
+ * limit. It currently assumes that for memory starting above 4G, 32-bit
+ * devices will use a DMA offset.
  */
-static phys_addr_t __init max_zone_dma32_phys(void)
+static phys_addr_t __init max_zone_phys(unsigned int zone_bits)
 {
-       phys_addr_t offset = memblock_start_of_DRAM() & GENMASK_ULL(63, 32);
-       return min(offset + (1ULL << 32), memblock_end_of_DRAM());
+       phys_addr_t offset = memblock_start_of_DRAM() & GENMASK_ULL(63, zone_bits);
+       return min(offset + (1ULL << zone_bits), memblock_end_of_DRAM());
 }
 
 #ifdef CONFIG_NUMA
@@ -186,6 +194,9 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max)
 {
        unsigned long max_zone_pfns[MAX_NR_ZONES]  = {0};
 
+#ifdef CONFIG_ZONE_DMA
+       max_zone_pfns[ZONE_DMA] = PFN_DOWN(arm64_dma_phys_limit);
+#endif
 #ifdef CONFIG_ZONE_DMA32
        max_zone_pfns[ZONE_DMA32] = PFN_DOWN(arm64_dma32_phys_limit);
 #endif
@@ -201,13 +212,18 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max)
        struct memblock_region *reg;
        unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES];
        unsigned long max_dma32 = min;
+       unsigned long max_dma = min;
 
        memset(zone_size, 0, sizeof(zone_size));
 
-       /* 4GB maximum for 32-bit only capable devices */
+#ifdef CONFIG_ZONE_DMA
+       max_dma = PFN_DOWN(arm64_dma_phys_limit);
+       zone_size[ZONE_DMA] = max_dma - min;
+       max_dma32 = max_dma;
+#endif
 #ifdef CONFIG_ZONE_DMA32
        max_dma32 = PFN_DOWN(arm64_dma32_phys_limit);
-       zone_size[ZONE_DMA32] = max_dma32 - min;
+       zone_size[ZONE_DMA32] = max_dma32 - max_dma;
 #endif
        zone_size[ZONE_NORMAL] = max - max_dma32;
 
@@ -219,11 +235,17 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max)
 
                if (start >= max)
                        continue;
-
+#ifdef CONFIG_ZONE_DMA
+               if (start < max_dma) {
+                       unsigned long dma_end = min_not_zero(end, max_dma);
+                       zhole_size[ZONE_DMA] -= dma_end - start;
+               }
+#endif
 #ifdef CONFIG_ZONE_DMA32
                if (start < max_dma32) {
-                       unsigned long dma_end = min(end, max_dma32);
-                       zhole_size[ZONE_DMA32] -= dma_end - start;
+                       unsigned long dma32_end = min(end, max_dma32);
+                       unsigned long dma32_start = max(start, max_dma);
+                       zhole_size[ZONE_DMA32] -= dma32_end - dma32_start;
                }
 #endif
                if (end > max_dma32) {
@@ -418,9 +440,11 @@ void __init arm64_memblock_init(void)
 
        early_init_fdt_scan_reserved_mem();
 
-       /* 4GB maximum for 32-bit only capable devices */
+       if (IS_ENABLED(CONFIG_ZONE_DMA))
+               arm64_dma_phys_limit = max_zone_phys(ARCH_ZONE_DMA_BITS);
+
        if (IS_ENABLED(CONFIG_ZONE_DMA32))
-               arm64_dma32_phys_limit = max_zone_dma32_phys();
+               arm64_dma32_phys_limit = max_zone_phys(32);
        else
                arm64_dma32_phys_limit = PHYS_MASK + 1;
 
@@ -430,7 +454,7 @@ void __init arm64_memblock_init(void)
 
        high_memory = __va(memblock_end_of_DRAM() - 1) + 1;
 
-       dma_contiguous_reserve(arm64_dma32_phys_limit);
+       dma_contiguous_reserve(arm64_dma_phys_limit ? : arm64_dma32_phys_limit);
 }
 
 void __init bootmem_init(void)
@@ -534,7 +558,7 @@ static void __init free_unused_memmap(void)
 void __init mem_init(void)
 {
        if (swiotlb_force == SWIOTLB_FORCE ||
-           max_pfn > (arm64_dma32_phys_limit >> PAGE_SHIFT))
+           max_pfn > PFN_DOWN(arm64_dma_phys_limit ? : arm64_dma32_phys_limit))
                swiotlb_init(1);
        else
                swiotlb_force = SWIOTLB_NO_FORCE;