ARM: dts: stm32: add SDIO pinctrl sleep support on stm32f7 boards

Use the new analog mode SDIO pin definitions on the STM32F7 boards.

Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

diff --git a/arch/arm/boot/dts/st/stm32746g-eval.dts b/arch/arm/boot/dts/st/stm32746g-eval.dts
index a293e65141c6c7f34b4307d50655e992f7b2ba73..e9ac37b6eca0e42caca61ef5b515298ee54edaff 100644 (file)
--- a/arch/arm/boot/dts/st/stm32746g-eval.dts
+++ b/arch/arm/boot/dts/st/stm32746g-eval.dts
@@ -188,9 +188,10 @@
        status = "okay";
        vmmc-supply = <&mmc_vcard>;
        broken-cd;
-       pinctrl-names = "default", "opendrain";
+       pinctrl-names = "default", "opendrain", "sleep";
        pinctrl-0 = <&sdio_pins_a>;
        pinctrl-1 = <&sdio_pins_od_a>;
+       pinctrl-2 = <&sdio_pins_sleep_a>;
        bus-width = <4>;
 };
 

diff --git a/arch/arm/boot/dts/st/stm32f746-disco.dts b/arch/arm/boot/dts/st/stm32f746-disco.dts
index 37e3a905fc3c51cd01622b75bbd82d5b431e595e..087de6f09629ec92f5dcf4ec4a7699cacf3a875d 100644 (file)
--- a/arch/arm/boot/dts/st/stm32f746-disco.dts
+++ b/arch/arm/boot/dts/st/stm32f746-disco.dts
@@ -164,9 +164,10 @@
        status = "okay";
        vmmc-supply = <&vcc_3v3>;
        cd-gpios = <&gpioc 13 GPIO_ACTIVE_LOW>;
-       pinctrl-names = "default", "opendrain";
+       pinctrl-names = "default", "opendrain", "sleep";
        pinctrl-0 = <&sdio_pins_a>;
        pinctrl-1 = <&sdio_pins_od_a>;
+       pinctrl-2 = <&sdio_pins_sleep_a>;
        bus-width = <4>;
 };
 

diff --git a/arch/arm/boot/dts/st/stm32f769-disco.dts b/arch/arm/boot/dts/st/stm32f769-disco.dts
index b038d0ed39e8c91488fe6e5fa1a0dc49899a5d23..5d12ae25b32746604e055d6e11f30bb42174a011 100644 (file)
--- a/arch/arm/boot/dts/st/stm32f769-disco.dts
+++ b/arch/arm/boot/dts/st/stm32f769-disco.dts
@@ -131,9 +131,10 @@
        vmmc-supply = <&mmc_vcard>;
        cd-gpios = <&gpioi 15 GPIO_ACTIVE_LOW>;
        broken-cd;
-       pinctrl-names = "default", "opendrain";
+       pinctrl-names = "default", "opendrain", "sleep";
        pinctrl-0 = <&sdio_pins_b>;
        pinctrl-1 = <&sdio_pins_od_b>;
+       pinctrl-2 = <&sdio_pins_sleep_b>;
        bus-width = <4>;
 };