ARM: dts: exynos: remove unneeded DVS voltages from PMIC on Arndale

The S5M8767 PMIC does not require anymore a safe DVS voltage, if the DVS
GPIO is not enabled.  Although previously bindings required providing
this safe DVS voltage, but since commit 04f9f068a619 ("regulator:
s5m8767: Modify parsing method of the voltage table of buck2/3/4") this
was ignored.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210928084949.27939-12-krzysztof.kozlowski@canonical.com

diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index a771542e28b8a1a7c01bfe4bbc3f126cbb800b40..3583095fbb2a8ddd70a081021fca3b60c350f981 100644 (file)
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -240,9 +240,6 @@
                vinl8-supply = <&buck8_reg>;
                vinl9-supply = <&buck8_reg>;
 
-               s5m8767,pmic-buck2-dvs-voltage = <1300000>;
-               s5m8767,pmic-buck3-dvs-voltage = <1100000>;
-               s5m8767,pmic-buck4-dvs-voltage = <1200000>;
                s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_HIGH>,
                                              <&gpd1 1 GPIO_ACTIVE_HIGH>,
                                              <&gpd1 2 GPIO_ACTIVE_HIGH>;