arm64: dts: qcom: ipq8074-hk10: enable QMP device, not the PHY node

Correct PCIe PHY enablement to refer the QMP device nodes rather than
PHY device nodes. QMP nodes have 'status = "disabled"' property in the
ipq8074.dtsi, while PHY nodes do not correspond to the actual device and
do not have the status property.

Fixes: 1ed34da63a37 ("arm64: dts: qcom: Add board support for HK10")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230324021651.1799969-2-dmitry.baryshkov@linaro.org

diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
index 651a231554e0b6e17fb3dc77687ceebfe7fa360d..1b8379ba87f9c778cae214fda62a1cfe5aa01004 100644 (file)
--- a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
@@ -48,11 +48,11 @@
        perst-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
 };
 
-&pcie_phy0 {
+&pcie_qmp0 {
        status = "okay";
 };
 
-&pcie_phy1 {
+&pcie_qmp1 {
        status = "okay";
 };