}
}
-static u32 ksz8_sw_get_phy_flags(struct dsa_switch *ds, int port)
-{
- /* Silicon Errata Sheet (DS80000830A):
- * Port 1 does not work with LinkMD Cable-Testing.
- * Port 1 does not respond to received PAUSE control frames.
- */
- if (!port)
- return MICREL_KSZ8_P1_ERRATA;
-
- return 0;
-}
-
static void ksz8_cfg_port_member(struct ksz_device *dev, int port, u8 member)
{
u8 data;
static const struct dsa_switch_ops ksz8_switch_ops = {
.get_tag_protocol = ksz_get_tag_protocol,
- .get_phy_flags = ksz8_sw_get_phy_flags,
+ .get_phy_flags = ksz_get_phy_flags,
.setup = ksz8_setup,
.phy_read = ksz_phy_read16,
.phy_write = ksz_phy_write16,
bits, set ? bits : 0);
}
-static int ksz9477_change_mtu(struct dsa_switch *ds, int port, int mtu)
+static int ksz9477_change_mtu(struct ksz_device *dev, int port, int mtu)
{
- struct ksz_device *dev = ds->priv;
u16 frame_size, max_frame = 0;
int i;
REG_SW_MTU_MASK, max_frame);
}
-static int ksz9477_max_mtu(struct dsa_switch *ds, int port)
+static int ksz9477_max_mtu(struct ksz_device *dev, int port)
{
return KSZ9477_MAX_FRAME_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN;
}
.port_mirror_add = ksz_port_mirror_add,
.port_mirror_del = ksz_port_mirror_del,
.get_stats64 = ksz_get_stats64,
- .port_change_mtu = ksz9477_change_mtu,
- .port_max_mtu = ksz9477_max_mtu,
+ .port_change_mtu = ksz_change_mtu,
+ .port_max_mtu = ksz_max_mtu,
};
static u32 ksz9477_get_port_addr(int port, int offset)
.fdb_del = ksz9477_fdb_del,
.mdb_add = ksz9477_mdb_add,
.mdb_del = ksz9477_mdb_del,
+ .change_mtu = ksz9477_change_mtu,
+ .max_mtu = ksz9477_max_mtu,
.shutdown = ksz9477_reset_switch,
.init = ksz9477_switch_init,
.exit = ksz9477_switch_exit,
#include <linux/if_bridge.h>
#include <linux/of_device.h>
#include <linux/of_net.h>
+#include <linux/micrel_phy.h>
#include <net/dsa.h>
#include <net/switchdev.h>
}
EXPORT_SYMBOL_GPL(ksz_phy_write16);
+u32 ksz_get_phy_flags(struct dsa_switch *ds, int port)
+{
+ struct ksz_device *dev = ds->priv;
+
+ if (dev->chip_id == KSZ8830_CHIP_ID) {
+ /* Silicon Errata Sheet (DS80000830A):
+ * Port 1 does not work with LinkMD Cable-Testing.
+ * Port 1 does not respond to received PAUSE control frames.
+ */
+ if (!port)
+ return MICREL_KSZ8_P1_ERRATA;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ksz_get_phy_flags);
+
void ksz_mac_link_down(struct dsa_switch *ds, int port, unsigned int mode,
phy_interface_t interface)
{
}
EXPORT_SYMBOL_GPL(ksz_port_mirror_del);
+int ksz_change_mtu(struct dsa_switch *ds, int port, int mtu)
+{
+ struct ksz_device *dev = ds->priv;
+
+ if (!dev->dev_ops->change_mtu)
+ return -EOPNOTSUPP;
+
+ return dev->dev_ops->change_mtu(dev, port, mtu);
+}
+EXPORT_SYMBOL_GPL(ksz_change_mtu);
+
+int ksz_max_mtu(struct dsa_switch *ds, int port)
+{
+ struct ksz_device *dev = ds->priv;
+
+ if (!dev->dev_ops->max_mtu)
+ return -EOPNOTSUPP;
+
+ return dev->dev_ops->max_mtu(dev, port);
+}
+EXPORT_SYMBOL_GPL(ksz_max_mtu);
+
static int ksz_switch_detect(struct ksz_device *dev)
{
u8 id1, id2;
struct dsa_db db);
void (*get_caps)(struct ksz_device *dev, int port,
struct phylink_config *config);
+ int (*change_mtu)(struct ksz_device *dev, int port, int mtu);
+ int (*max_mtu)(struct ksz_device *dev, int port);
void (*freeze_mib)(struct ksz_device *dev, int port, bool freeze);
void (*port_init_cnt)(struct ksz_device *dev, int port);
int (*shutdown)(struct ksz_device *dev);
int ksz_phy_read16(struct dsa_switch *ds, int addr, int reg);
int ksz_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val);
+u32 ksz_get_phy_flags(struct dsa_switch *ds, int port);
void ksz_mac_link_down(struct dsa_switch *ds, int port, unsigned int mode,
phy_interface_t interface);
int ksz_sset_count(struct dsa_switch *ds, int port, int sset);
bool ingress, struct netlink_ext_ack *extack);
void ksz_port_mirror_del(struct dsa_switch *ds, int port,
struct dsa_mall_mirror_tc_entry *mirror);
+int ksz_change_mtu(struct dsa_switch *ds, int port, int mtu);
+int ksz_max_mtu(struct dsa_switch *ds, int port);
/* Common register access functions */