net: phy: dp83822: disable MDI crossover status change interrupt

[ Upstream commit 7f378c03aa4952507521174fb0da7b24a9ad0be6 ]

If the cable is disconnected the PHY seems to toggle between MDI and
MDI-X modes. With the MDI crossover status interrupt active this causes
roughly 10 interrupts per second.

As the crossover status isn't checked by the driver, the interrupt can
be disabled to reduce the interrupt load.

Fixes: 87461f7a58ab ("net: phy: DP83822 initial driver submission")
Signed-off-by: Felix Riemann <felix.riemann@sma.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221018104755.30025-1-svc.sw.rte.linux@sma.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

diff --git a/drivers/net/phy/dp83822.c b/drivers/net/phy/dp83822.c
index a792dd6d2ec33e6f5c9b40dcf5970433fa6e30d3..0b511abb5422e45ac35ee3f2b80cef98405643d1 100644 (file)
--- a/drivers/net/phy/dp83822.c
+++ b/drivers/net/phy/dp83822.c
@@ -253,8 +253,7 @@ static int dp83822_config_intr(struct phy_device *phydev)
                                DP83822_EEE_ERROR_CHANGE_INT_EN);
 
                if (!dp83822->fx_enabled)
-                       misr_status |= DP83822_MDI_XOVER_INT_EN |
-                                      DP83822_ANEG_ERR_INT_EN |
+                       misr_status |= DP83822_ANEG_ERR_INT_EN |
                                       DP83822_WOL_PKT_INT_EN;
 
                err = phy_write(phydev, MII_DP83822_MISR2, misr_status);