arm64: dts: qcom: sm8250: Add remoteprocs

Add remoteproc nodes for the audio, compute and sensor cores, define
glink for each one and enable them on the MTP with appropriate firmware
defined.

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200622222747.717306-6-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
index 63d259931c4d67e8c2419e33011251599470b4ed..6894f8490dae70e866be578c6eefef4967db0f23 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
@@ -55,6 +55,11 @@
        };
 };
 
+&adsp {
+       status = "okay";
+       firmware-name = "qcom/sm8250/adsp.mbn";
+};
+
 &apps_rsc {
        pm8150-rpmh-regulators {
                compatible = "qcom,pm8150-rpmh-regulators";
@@ -348,10 +353,20 @@
        };
 };
 
+&cdsp {
+       status = "okay";
+       firmware-name = "qcom/sm8250/cdsp.mbn";
+};
+
 &qupv3_id_1 {
        status = "okay";
 };
 
+&slpi {
+       status = "okay";
+       firmware-name = "qcom/sm8250/slpi.mbn";
+};
+
 &tlmm {
        gpio-reserved-ranges = <28 4>, <40 4>;
 };

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 5b835a2434567f244873a9c4ca56a5d929c4c29e..6fa2c24f5d74a7739122d32702a7ccd5cf66c8a4 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -1052,6 +1052,83 @@
                        reg = <0x0 0x01f40000 0x0 0x40000>;
                };
 
+               slpi: remoteproc@5c00000 {
+                       compatible = "qcom,sm8250-slpi-pas";
+                       reg = <0 0x05c00000 0 0x4000>;
+
+                       interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
+                                             <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
+                                             <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
+                                             <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
+                                             <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>;
+                       interrupt-names = "wdog", "fatal", "ready",
+                                         "handover", "stop-ack";
+
+                       clocks = <&rpmhcc RPMH_CXO_CLK>;
+                       clock-names = "xo";
+
+                       power-domains = <&aoss_qmp AOSS_QMP_LS_SLPI>,
+                                       <&rpmhpd SM8250_LCX>,
+                                       <&rpmhpd SM8250_LMX>;
+                       power-domain-names = "load_state", "lcx", "lmx";
+
+                       memory-region = <&slpi_mem>;
+
+                       qcom,smem-states = <&smp2p_slpi_out 0>;
+                       qcom,smem-state-names = "stop";
+
+                       status = "disabled";
+
+                       glink-edge {
+                               interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
+                                                            IPCC_MPROC_SIGNAL_GLINK_QMP
+                                                            IRQ_TYPE_EDGE_RISING>;
+                               mboxes = <&ipcc IPCC_CLIENT_SLPI
+                                               IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+                               label = "lpass";
+                               qcom,remote-pid = <3>;
+                       };
+               };
+
+               cdsp: remoteproc@8300000 {
+                       compatible = "qcom,sm8250-cdsp-pas";
+                       reg = <0 0x08300000 0 0x10000>;
+
+                       interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+                                             <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+                                             <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+                                             <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+                                             <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+                       interrupt-names = "wdog", "fatal", "ready",
+                                         "handover", "stop-ack";
+
+                       clocks = <&rpmhcc RPMH_CXO_CLK>;
+                       clock-names = "xo";
+
+                       power-domains = <&aoss_qmp AOSS_QMP_LS_CDSP>,
+                                       <&rpmhpd SM8250_CX>;
+                       power-domain-names = "load_state", "cx";
+
+                       memory-region = <&cdsp_mem>;
+
+                       qcom,smem-states = <&smp2p_cdsp_out 0>;
+                       qcom,smem-state-names = "stop";
+
+                       status = "disabled";
+
+                       glink-edge {
+                               interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+                                                            IPCC_MPROC_SIGNAL_GLINK_QMP
+                                                            IRQ_TYPE_EDGE_RISING>;
+                               mboxes = <&ipcc IPCC_CLIENT_CDSP
+                                               IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+                               label = "lpass";
+                               qcom,remote-pid = <5>;
+                       };
+               };
+
                pdc: interrupt-controller@b220000 {
                        compatible = "qcom,sm8250-pdc", "qcom,pdc";
                        reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
@@ -1668,6 +1745,45 @@
                        };
                };
 
+               adsp: remoteproc@17300000 {
+                       compatible = "qcom,sm8250-adsp-pas";
+                       reg = <0 0x17300000 0 0x100>;
+
+                       interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+                                             <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+                                             <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+                                             <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+                                             <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+                       interrupt-names = "wdog", "fatal", "ready",
+                                         "handover", "stop-ack";
+
+                       clocks = <&rpmhcc RPMH_CXO_CLK>;
+                       clock-names = "xo";
+
+                       power-domains = <&aoss_qmp AOSS_QMP_LS_LPASS>,
+                                       <&rpmhpd SM8250_LCX>,
+                                       <&rpmhpd SM8250_LMX>;
+                       power-domain-names = "load_state", "lcx", "lmx";
+
+                       memory-region = <&adsp_mem>;
+
+                       qcom,smem-states = <&smp2p_adsp_out 0>;
+                       qcom,smem-state-names = "stop";
+
+                       status = "disabled";
+
+                       glink-edge {
+                               interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+                                                            IPCC_MPROC_SIGNAL_GLINK_QMP
+                                                            IRQ_TYPE_EDGE_RISING>;
+                               mboxes = <&ipcc IPCC_CLIENT_LPASS
+                                               IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+                               label = "lpass";
+                               qcom,remote-pid = <2>;
+                       };
+               };
+
                intc: interrupt-controller@17a00000 {
                        compatible = "arm,gic-v3";
                        #interrupt-cells = <3>;