ARM: dts: imx6qdl-sabrelite: Use #pwm-cells = <3> for imx27-pwm device

The binding dictates using 3 pwm-cells. Adhere to that.

This fixes the following dtbs_check warnings:

	arch/arm/boot/dts/nxp/imx/imx6dl-sabrelite.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected
		from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
	arch/arm/boot/dts/nxp/imx/imx6dl-sabrelite.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected
		from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
	arch/arm/boot/dts/nxp/imx/imx6dl-sabrelite.dtb: pwm@208c000: #pwm-cells:0:0: 3 was expected
		from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
	arch/arm/boot/dts/nxp/imx/imx6q-sabrelite.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected
		from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
	arch/arm/boot/dts/nxp/imx/imx6q-sabrelite.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected
		from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
	arch/arm/boot/dts/nxp/imx/imx6q-sabrelite.dtb: pwm@208c000: #pwm-cells:0:0: 3 was expected
		from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi
index 84c8a9531e181596bc800b2aa94d6c68edf54519..9c502bf77d0bf05e635197f74beef2e5c8141e95 100644 (file)
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi
@@ -99,7 +99,7 @@
                #clock-cells = <0>;
                clock-frequency = <22000000>;
                clock-output-names = "mipi_pwm3";
-               pwms = <&pwm3 0 45>; /* 1 / 45 ns = 22 MHz */
+               pwms = <&pwm3 0 45 0>; /* 1 / 45 ns = 22 MHz */
                status = "okay";
        };
 
@@ -162,7 +162,7 @@
 
        backlight_lcd: backlight-lcd {
                compatible = "pwm-backlight";
-               pwms = <&pwm1 0 5000000>;
+               pwms = <&pwm1 0 5000000 0>;
                brightness-levels = <0 4 8 16 32 64 128 255>;
                default-brightness-level = <7>;
                power-supply = <&reg_3p3v>;
@@ -171,7 +171,7 @@
 
        backlight_lvds: backlight-lvds {
                compatible = "pwm-backlight";
-               pwms = <&pwm4 0 5000000>;
+               pwms = <&pwm4 0 5000000 0>;
                brightness-levels = <0 4 8 16 32 64 128 255>;
                default-brightness-level = <7>;
                power-supply = <&reg_3p3v>;
@@ -654,21 +654,18 @@
 };
 
 &pwm1 {
-       #pwm-cells = <2>;
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_pwm1>;
        status = "okay";
 };
 
 &pwm3 {
-       #pwm-cells = <2>;
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_pwm3>;
        status = "okay";
 };
 
 &pwm4 {
-       #pwm-cells = <2>;
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_pwm4>;
        status = "okay";