pinctrl: microchip-sgpio: update to support regmap

Adopt regmap instead of a direct memory map so that custom regmaps and
other interfaces can be supported.

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Link: https://lore.kernel.org/r/20211119195928.2498441-5-colin.foster@in-advantage.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/drivers/pinctrl/pinctrl-microchip-sgpio.c b/drivers/pinctrl/pinctrl-microchip-sgpio.c
index 78765faa245aea1fc1d47bd030465f7d5a180e89..8e081c90bdb2468137ff61a949e300efe15ba57a 100644 (file)
--- a/drivers/pinctrl/pinctrl-microchip-sgpio.c
+++ b/drivers/pinctrl/pinctrl-microchip-sgpio.c
@@ -17,6 +17,7 @@
 #include <linux/pinctrl/pinmux.h>
 #include <linux/platform_device.h>
 #include <linux/property.h>
+#include <linux/regmap.h>
 #include <linux/reset.h>
 
 #include "core.h"
@@ -113,7 +114,7 @@ struct sgpio_priv {
        u32 bitcount;
        u32 ports;
        u32 clock;
-       u32 __iomem *regs;
+       struct regmap *regs;
        const struct sgpio_properties *properties;
 };
 
@@ -134,31 +135,42 @@ static inline int sgpio_addr_to_pin(struct sgpio_priv *priv, int port, int bit)
        return bit + port * priv->bitcount;
 }
 
-static inline u32 sgpio_readl(struct sgpio_priv *priv, u32 rno, u32 off)
+static inline u32 sgpio_get_addr(struct sgpio_priv *priv, u32 rno, u32 off)
+{
+       return priv->properties->regoff[rno] + off;
+}
+
+static u32 sgpio_readl(struct sgpio_priv *priv, u32 rno, u32 off)
 {
-       u32 __iomem *reg = &priv->regs[priv->properties->regoff[rno] + off];
+       u32 addr = sgpio_get_addr(priv, rno, off);
+       u32 val = 0;
+       int ret;
 
-       return readl(reg);
+       ret = regmap_read(priv->regs, addr, &val);
+       WARN_ONCE(ret, "error reading sgpio reg %d\n", ret);
+
+       return val;
 }
 
-static inline void sgpio_writel(struct sgpio_priv *priv,
+static void sgpio_writel(struct sgpio_priv *priv,
                                u32 val, u32 rno, u32 off)
 {
-       u32 __iomem *reg = &priv->regs[priv->properties->regoff[rno] + off];
+       u32 addr = sgpio_get_addr(priv, rno, off);
+       int ret;
 
-       writel(val, reg);
+       ret = regmap_write(priv->regs, addr, val);
+       WARN_ONCE(ret, "error writing sgpio reg %d\n", ret);
 }
 
 static inline void sgpio_clrsetbits(struct sgpio_priv *priv,
                                    u32 rno, u32 off, u32 clear, u32 set)
 {
-       u32 __iomem *reg = &priv->regs[priv->properties->regoff[rno] + off];
-       u32 val = readl(reg);
+       u32 val = sgpio_readl(priv, rno, off);
 
        val &= ~clear;
        val |= set;
 
-       writel(val, reg);
+       sgpio_writel(priv, val, rno, off);
 }
 
 static inline void sgpio_configure_bitstream(struct sgpio_priv *priv)
@@ -807,7 +819,13 @@ static int microchip_sgpio_probe(struct platform_device *pdev)
        struct reset_control *reset;
        struct sgpio_priv *priv;
        struct clk *clk;
+       u32 __iomem *regs;
        u32 val;
+       struct regmap_config regmap_config = {
+               .reg_bits = 32,
+               .val_bits = 32,
+               .reg_stride = 4,
+       };
 
        priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
        if (!priv)
@@ -832,9 +850,14 @@ static int microchip_sgpio_probe(struct platform_device *pdev)
                return -EINVAL;
        }
 
-       priv->regs = devm_platform_ioremap_resource(pdev, 0);
+       regs = devm_platform_ioremap_resource(pdev, 0);
+       if (IS_ERR(regs))
+               return PTR_ERR(regs);
+
+       priv->regs = devm_regmap_init_mmio(dev, regs, &regmap_config);
        if (IS_ERR(priv->regs))
                return PTR_ERR(priv->regs);
+
        priv->properties = device_get_match_data(dev);
        priv->in.is_input = true;