ARM: dts: nxp: imx6ul: xnur-gpio -> xnur-gpios

Replace all "xnur-gpio" with "xnur-gpios" in the i.MX6UL(L) Touchscreen
node, since the -gpio suffix is deprecated. All known implementations of
this binding can handle -gpio and -gpios since day 1, so this should be
fully backwards compatible.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi
index 2ac40d69425b3cdf78d3c686643b3e9e0987bbdf..f10f0525490b66f413c9fa9a41d08f8a82ae35f2 100644 (file)
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi
@@ -321,7 +321,7 @@
 &tsc {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_tsc>;
-       xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+       xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
        measure-delay-time = <0xffff>;
        pre-charge-time = <0xfff>;
        status = "okay";

diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts
index 875ae699c5cb80d7c5cc683e701d9338ab75ddc5..2ca18f3dad0aa6576398235398047753a79b285b 100644 (file)
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts
@@ -203,7 +203,7 @@
 &tsc {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_tsc>;
-       xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+       xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 };
 
 &sai2 {

diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi
index 18cac19aa9b0f8e00a497da6bf9752e1b4807a09..af337f18a266ca846be7ae3652a40ff69f507809 100644 (file)
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi
@@ -156,7 +156,7 @@
 &tsc {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_tsc>;
-       xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+       xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
        measure-delay-time = <0xffff>;
        pre-charge-time = <0xffff>;
        status = "okay";

diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi
index f914fe3818c2fed684e9549d0390f8e63d6d7bd7..a74f5273f9b3a37faa6bdca000056b74d5647b39 100644 (file)
--- a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi
@@ -273,7 +273,7 @@
        pinctrl-names = "default";
        pre-charge-time = <0xfff>;
        touchscreen-average-samples = <32>;
-       xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+       xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 };
 
 /* DHCOM UART1 */