ARM: dts: marvell: Fix some common switch mistakes

Fix some errors in the Marvell MV88E6xxx switch descriptions:
- The top node had no address size or cells.
- switch0@0 is not OK, should be ethernet-switch@0.
- The ports node should be named ethernet-ports
- The ethernet-ports node should have port@0 etc children, no
  plural "ports" in the children.
- Ports should be named ethernet-port@0 etc
- PHYs should be named ethernet-phy@0 etc

This serves as an example of fixes needed for introducing a
schema for the bindings, but the patch can simply be applied.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/arch/arm/boot/dts/marvell/armada-370-rd.dts b/arch/arm/boot/dts/marvell/armada-370-rd.dts
index b459a670f6158c4306b4c03ca5ab7afc7d69beef..1b241da11e942c8f67f2568a188bae5146fefe64 100644 (file)
--- a/arch/arm/boot/dts/marvell/armada-370-rd.dts
+++ b/arch/arm/boot/dts/marvell/armada-370-rd.dts
@@ -149,39 +149,37 @@
                };
        };
 
-       switch: switch@10 {
+       switch: ethernet-switch@10 {
                compatible = "marvell,mv88e6085";
-               #address-cells = <1>;
-               #size-cells = <0>;
                reg = <0x10>;
                interrupt-controller;
                #interrupt-cells = <2>;
 
-               ports {
+               ethernet-ports {
                        #address-cells = <1>;
                        #size-cells = <0>;
 
-                       port@0 {
+                       ethernet-port@0 {
                                reg = <0>;
                                label = "lan0";
                        };
 
-                       port@1 {
+                       ethernet-port@1 {
                                reg = <1>;
                                label = "lan1";
                        };
 
-                       port@2 {
+                       ethernet-port@2 {
                                reg = <2>;
                                label = "lan2";
                        };
 
-                       port@3 {
+                       ethernet-port@3 {
                                reg = <3>;
                                label = "lan3";
                        };
 
-                       port@5 {
+                       ethernet-port@5 {
                                reg = <5>;
                                ethernet = <&eth1>;
                                phy-mode = "rgmii-id";
@@ -196,25 +194,25 @@
                        #address-cells = <1>;
                        #size-cells = <0>;
 
-                       switchphy0: switchphy@0 {
+                       switchphy0: ethernet-phy@0 {
                                reg = <0>;
                                interrupt-parent = <&switch>;
                                interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
                        };
 
-                       switchphy1: switchphy@1 {
+                       switchphy1: ethernet-phy@1 {
                                reg = <1>;
                                interrupt-parent = <&switch>;
                                interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
                        };
 
-                       switchphy2: switchphy@2 {
+                       switchphy2: ethernet-phy@2 {
                                reg = <2>;
                                interrupt-parent = <&switch>;
                                interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
                        };
 
-                       switchphy3: switchphy@3 {
+                       switchphy3: ethernet-phy@3 {
                                reg = <3>;
                                interrupt-parent = <&switch>;
                                interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;

diff --git a/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts b/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts
index f4c4b213ef4ed6cdf5243031146603245c1e3e20..5baf83e5253d8c2a903eb22034e56e6b88bc1f78 100644 (file)
--- a/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts
+++ b/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts
@@ -77,51 +77,49 @@
        pinctrl-0 = <&mdio_pins>;
        status = "okay";
 
-       switch@0 {
+       ethernet-switch@0 {
                compatible = "marvell,mv88e6190";
-               #address-cells = <1>;
                #interrupt-cells = <2>;
                interrupt-controller;
                interrupt-parent = <&gpio1>;
                interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
                pinctrl-0 = <&switch_interrupt_pins>;
                pinctrl-names = "default";
-               #size-cells = <0>;
                reg = <0>;
 
                mdio {
                        #address-cells = <1>;
                        #size-cells = <0>;
 
-                       switch0phy1: switch0phy1@1 {
+                       switch0phy1: ethernet-phy@1 {
                                reg = <0x1>;
                        };
 
-                       switch0phy2: switch0phy2@2 {
+                       switch0phy2: ethernet-phy@2 {
                                reg = <0x2>;
                        };
 
-                       switch0phy3: switch0phy3@3 {
+                       switch0phy3: ethernet-phy@3 {
                                reg = <0x3>;
                        };
 
-                       switch0phy4: switch0phy4@4 {
+                       switch0phy4: ethernet-phy@4 {
                                reg = <0x4>;
                        };
 
-                       switch0phy5: switch0phy5@5 {
+                       switch0phy5: ethernet-phy@5 {
                                reg = <0x5>;
                        };
 
-                       switch0phy6: switch0phy6@6 {
+                       switch0phy6: ethernet-phy@6 {
                                reg = <0x6>;
                        };
 
-                       switch0phy7: switch0phy7@7 {
+                       switch0phy7: ethernet-phy@7 {
                                reg = <0x7>;
                        };
 
-                       switch0phy8: switch0phy8@8 {
+                       switch0phy8: ethernet-phy@8 {
                                reg = <0x8>;
                        };
                };
@@ -142,11 +140,11 @@
                        };
                };
 
-               ports {
+               ethernet-ports {
                        #address-cells = <1>;
                        #size-cells = <0>;
 
-                       port@0 {
+                       ethernet-port@0 {
                                ethernet = <&eth0>;
                                phy-mode = "rgmii";
                                reg = <0>;
@@ -158,55 +156,55 @@
                                };
                        };
 
-                       port@1 {
+                       ethernet-port@1 {
                                label = "lan1";
                                phy-handle = <&switch0phy1>;
                                reg = <1>;
                        };
 
-                       port@2 {
+                       ethernet-port@2 {
                                label = "lan2";
                                phy-handle = <&switch0phy2>;
                                reg = <2>;
                        };
 
-                       port@3 {
+                       ethernet-port@3 {
                                label = "lan3";
                                phy-handle = <&switch0phy3>;
                                reg = <3>;
                        };
 
-                       port@4 {
+                       ethernet-port@4 {
                                label = "lan4";
                                phy-handle = <&switch0phy4>;
                                reg = <4>;
                        };
 
-                       port@5 {
+                       ethernet-port@5 {
                                label = "lan5";
                                phy-handle = <&switch0phy5>;
                                reg = <5>;
                        };
 
-                       port@6 {
+                       ethernet-port@6 {
                                label = "lan6";
                                phy-handle = <&switch0phy6>;
                                reg = <6>;
                        };
 
-                       port@7 {
+                       ethernet-port@7 {
                                label = "lan7";
                                phy-handle = <&switch0phy7>;
                                reg = <7>;
                        };
 
-                       port@8 {
+                       ethernet-port@8 {
                                label = "lan8";
                                phy-handle = <&switch0phy8>;
                                reg = <8>;
                        };
 
-                       port@9 {
+                       ethernet-port@9 {
                                /* 88X3310P external phy */
                                label = "lan9";
                                phy-handle = <&phy1>;
@@ -214,7 +212,7 @@
                                reg = <9>;
                        };
 
-                       port@a {
+                       ethernet-port@a {
                                /* 88X3310P external phy */
                                label = "lan10";
                                phy-handle = <&phy2>;

diff --git a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts
index 1990f7d0cc79a72c41796756d53af9142129f972..1707d1b015452d26c138ac198f1dc01982cea779 100644 (file)
--- a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts
@@ -7,66 +7,66 @@
 };
 
 &mdio {
-       switch0: switch0@4 {
+       switch0: ethernet-switch@4 {
                compatible = "marvell,mv88e6190";
                reg = <4>;
                pinctrl-names = "default";
                pinctrl-0 = <&cf_gtr_switch_reset_pins>;
                reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
 
-               ports {
+               ethernet-ports {
                        #address-cells = <1>;
                        #size-cells = <0>;
 
-                       port@1 {
+                       ethernet-port@1 {
                                reg = <1>;
                                label = "lan8";
                                phy-handle = <&switch0phy0>;
                        };
 
-                       port@2 {
+                       ethernet-port@2 {
                                reg = <2>;
                                label = "lan7";
                                phy-handle = <&switch0phy1>;
                        };
 
-                       port@3 {
+                       ethernet-port@3 {
                                reg = <3>;
                                label = "lan6";
                                phy-handle = <&switch0phy2>;
                        };
 
-                       port@4 {
+                       ethernet-port@4 {
                                reg = <4>;
                                label = "lan5";
                                phy-handle = <&switch0phy3>;
                        };
 
-                       port@5 {
+                       ethernet-port@5 {
                                reg = <5>;
                                label = "lan4";
                                phy-handle = <&switch0phy4>;
                        };
 
-                       port@6 {
+                       ethernet-port@6 {
                                reg = <6>;
                                label = "lan3";
                                phy-handle = <&switch0phy5>;
                        };
 
-                       port@7 {
+                       ethernet-port@7 {
                                reg = <7>;
                                label = "lan2";
                                phy-handle = <&switch0phy6>;
                        };
 
-                       port@8 {
+                       ethernet-port@8 {
                                reg = <8>;
                                label = "lan1";
                                phy-handle = <&switch0phy7>;
                        };
 
-                       port@10 {
+                       ethernet-port@10 {
                                reg = <10>;
                                phy-mode = "2500base-x";
 
@@ -83,35 +83,35 @@
                        #address-cells = <1>;
                        #size-cells = <0>;
 
-                       switch0phy0: switch0phy0@1 {
+                       switch0phy0: ethernet-phy@1 {
                                reg = <0x1>;
                        };
 
-                       switch0phy1: switch0phy1@2 {
+                       switch0phy1: ethernet-phy@2 {
                                reg = <0x2>;
                        };
 
-                       switch0phy2: switch0phy2@3 {
+                       switch0phy2: ethernet-phy@3 {
                                reg = <0x3>;
                        };
 
-                       switch0phy3: switch0phy3@4 {
+                       switch0phy3: ethernet-phy@4 {
                                reg = <0x4>;
                        };
 
-                       switch0phy4: switch0phy4@5 {
+                       switch0phy4: ethernet-phy@5 {
                                reg = <0x5>;
                        };
 
-                       switch0phy5: switch0phy5@6 {
+                       switch0phy5: ethernet-phy@6 {
                                reg = <0x6>;
                        };
 
-                       switch0phy6: switch0phy6@7 {
+                       switch0phy6: ethernet-phy@7 {
                                reg = <0x7>;
                        };
 
-                       switch0phy7: switch0phy7@8 {
+                       switch0phy7: ethernet-phy@8 {
                                reg = <0x8>;
                        };
                };

diff --git a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts
index b795ad573891ea0e096822e828e18db403a8b02c..a7678a784c180145cd818e7782253d43179fefb3 100644 (file)
--- a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts
@@ -11,42 +11,42 @@
 };
 
 &mdio {
-       switch0: switch0@4 {
+       switch0: ethernet-switch@4 {
                compatible = "marvell,mv88e6085";
                reg = <4>;
                pinctrl-names = "default";
                pinctrl-0 = <&cf_gtr_switch_reset_pins>;
                reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
 
-               ports {
+               ethernet-ports {
                        #address-cells = <1>;
                        #size-cells = <0>;
 
-                       port@1 {
+                       ethernet-port@1 {
                                reg = <1>;
                                label = "lan2";
                                phy-handle = <&switch0phy0>;
                        };
 
-                       port@2 {
+                       ethernet-port@2 {
                                reg = <2>;
                                label = "lan1";
                                phy-handle = <&switch0phy1>;
                        };
 
-                       port@3 {
+                       ethernet-port@3 {
                                reg = <3>;
                                label = "lan4";
                                phy-handle = <&switch0phy2>;
                        };
 
-                       port@4 {
+                       ethernet-port@4 {
                                reg = <4>;
                                label = "lan3";
                                phy-handle = <&switch0phy3>;
                        };
 
-                       port@5 {
+                       ethernet-port@5 {
                                reg = <5>;
                                phy-mode = "2500base-x";
                                ethernet = <&eth1>;
@@ -63,19 +63,19 @@
                        #address-cells = <1>;
                        #size-cells = <0>;
 
-                       switch0phy0: switch0phy0@11 {
+                       switch0phy0: ethernet-phy@11 {
                                reg = <0x11>;
                        };
 
-                       switch0phy1: switch0phy1@12 {
+                       switch0phy1: ethernet-phy@12 {
                                reg = <0x12>;
                        };
 
-                       switch0phy2: switch0phy2@13 {
+                       switch0phy2: ethernet-phy@13 {
                                reg = <0x13>;
                        };
 
-                       switch0phy3: switch0phy3@14 {
+                       switch0phy3: ethernet-phy@14 {
                                reg = <0x14>;
                        };
                };

diff --git a/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi b/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi
index fc8216fd9f60092603bf2ef612b12cb683468c8e..4116ed60f70923b0489f640f28cfdb4b0c983ac1 100644 (file)
--- a/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi
@@ -158,42 +158,40 @@
 &mdio {
        status = "okay";
 
-       switch@0 {
+       ethernet-switch@0 {
                compatible = "marvell,mv88e6085";
-               #address-cells = <1>;
-               #size-cells = <0>;
                reg = <0>;
 
-               ports {
+               ethernet-ports {
                        #address-cells = <1>;
                        #size-cells = <0>;
 
-                       port@0 {
+                       ethernet-port@0 {
                                reg = <0>;
                                label = "lan4";
                        };
 
-                       port@1 {
+                       ethernet-port@1 {
                                reg = <1>;
                                label = "lan3";
                        };
 
-                       port@2 {
+                       ethernet-port@2 {
                                reg = <2>;
                                label = "lan2";
                        };
 
-                       port@3 {
+                       ethernet-port@3 {
                                reg = <3>;
                                label = "lan1";
                        };
 
-                       port@4 {
+                       ethernet-port@4 {
                                reg = <4>;
                                label = "wan";
                        };
 
-                       port@5 {
+                       ethernet-port@5 {
                                reg = <5>;
                                phy-mode = "sgmii";
                                ethernet = <&eth2>;

diff --git a/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts
index 2d8d319bec83000f1561648c1f3ec47d5b172d2f..7b755bb4e4e7519dca60e87a734571a049b604bd 100644 (file)
--- a/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts
@@ -435,12 +435,10 @@
        };
 
        /* Switch MV88E6176 at address 0x10 */
-       switch@10 {
+       ethernet-switch@10 {
                pinctrl-names = "default";
                pinctrl-0 = <&swint_pins>;
                compatible = "marvell,mv88e6085";
-               #address-cells = <1>;
-               #size-cells = <0>;
 
                dsa,member = <0 0>;
                reg = <0x10>;
@@ -448,36 +446,36 @@
                interrupt-parent = <&gpio1>;
                interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
 
-               ports {
+               ethernet-ports {
                        #address-cells = <1>;
                        #size-cells = <0>;
 
-                       ports@0 {
+                       ethernet-port@0 {
                                reg = <0>;
                                label = "lan0";
                        };
 
-                       ports@1 {
+                       ethernet-port@1 {
                                reg = <1>;
                                label = "lan1";
                        };
 
-                       ports@2 {
+                       ethernet-port@2 {
                                reg = <2>;
                                label = "lan2";
                        };
 
-                       ports@3 {
+                       ethernet-port@3 {
                                reg = <3>;
                                label = "lan3";
                        };
 
-                       ports@4 {
+                       ethernet-port@4 {
                                reg = <4>;
                                label = "lan4";
                        };
 
-                       ports@5 {
+                       ethernet-port@5 {
                                reg = <5>;
                                ethernet = <&eth1>;
                                phy-mode = "rgmii-id";
@@ -488,7 +486,7 @@
                                };
                        };
 
-                       ports@6 {
+                       ethernet-port@6 {
                                reg = <6>;
                                ethernet = <&eth0>;
                                phy-mode = "rgmii-id";

diff --git a/arch/arm/boot/dts/marvell/armada-388-clearfog.dts b/arch/arm/boot/dts/marvell/armada-388-clearfog.dts
index 32c569df142ffc58afd064c4321865765f95fdc3..3290ccad2374575d86f522c08e75826b40c32918 100644 (file)
--- a/arch/arm/boot/dts/marvell/armada-388-clearfog.dts
+++ b/arch/arm/boot/dts/marvell/armada-388-clearfog.dts
@@ -92,44 +92,42 @@
 &mdio {
        status = "okay";
 
-       switch@4 {
+       ethernet-switch@4 {
                compatible = "marvell,mv88e6085";
-               #address-cells = <1>;
-               #size-cells = <0>;
                reg = <4>;
                pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>;
                pinctrl-names = "default";
 
-               ports {
+               ethernet-ports {
                        #address-cells = <1>;
                        #size-cells = <0>;
 
-                       port@0 {
+                       ethernet-port@0 {
                                reg = <0>;
                                label = "lan5";
                        };
 
-                       port@1 {
+                       ethernet-port@1 {
                                reg = <1>;
                                label = "lan4";
                        };
 
-                       port@2 {
+                       ethernet-port@2 {
                                reg = <2>;
                                label = "lan3";
                        };
 
-                       port@3 {
+                       ethernet-port@3 {
                                reg = <3>;
                                label = "lan2";
                        };
 
-                       port@4 {
+                       ethernet-port@4 {
                                reg = <4>;
                                label = "lan1";
                        };
 
-                       port@5 {
+                       ethernet-port@5 {
                                reg = <5>;
                                ethernet = <&eth1>;
                                phy-mode = "1000base-x";
@@ -140,7 +138,7 @@
                                };
                        };
 
-                       port@6 {
+                       ethernet-port@6 {
                                /* 88E1512 external phy */
                                reg = <6>;
                                label = "lan6";

diff --git a/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts
index 7a0614fd0c93ad6e4a8e78a89379ebe2c732c940..ea859f7ea04221a34841acf9dd41c15fc83d9430 100644 (file)
--- a/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts
@@ -265,42 +265,40 @@
 &mdio {
        status = "okay";
 
-       switch@0 {
+       ethernet-switch@0 {
                compatible = "marvell,mv88e6085";
-               #address-cells = <1>;
-               #size-cells = <0>;
                reg = <0>;
 
-               ports {
+               ethernet-ports {
                        #address-cells = <1>;
                        #size-cells = <0>;
 
-                       port@0 {
+                       ethernet-port@0 {
                                reg = <0>;
                                label = "lan4";
                        };
 
-                       port@1 {
+                       ethernet-port@1 {
                                reg = <1>;
                                label = "lan3";
                        };
 
-                       port@2 {
+                       ethernet-port@2 {
                                reg = <2>;
                                label = "lan2";
                        };
 
-                       port@3 {
+                       ethernet-port@3 {
                                reg = <3>;
                                label = "lan1";
                        };
 
-                       port@4 {
+                       ethernet-port@4 {
                                reg = <4>;
                                label = "internet";
                        };
 
-                       port@5 {
+                       ethernet-port@5 {
                                reg = <5>;
                                phy-mode = "rgmii-id";
                                ethernet = <&eth0>;