ASoC: atmel-i2s: dt-bindings: Remove unnecessary phandle to aclk

The optional clock phandle to aclk (Audio PLL clock) is no longer needed
by the driver.

Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/Documentation/devicetree/bindings/sound/atmel-i2s.txt b/Documentation/devicetree/bindings/sound/atmel-i2s.txt
index 735368b8a73fe5149fbb13f03741fecf6dad4094..40549f496a81ccdfb59d49da32682ab8cba2107f 100644 (file)
--- a/Documentation/devicetree/bindings/sound/atmel-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/atmel-i2s.txt
@@ -15,7 +15,6 @@ Required properties:
 - clock-names:    Should be one of each entry matching the clocks phandles list:
                   - "pclk" (peripheral clock) Required.
                   - "gclk" (generated clock) Optional (1).
-                  - "aclk" (Audio PLL clock) Optional (1).
                   - "muxclk" (I2S mux clock) Optional (1).
 
 Optional properties:
@@ -23,9 +22,9 @@ Optional properties:
 - princtrl-names: Should contain only one value - "default".
 
 
-(1) : Only the peripheral clock is required. The generated clock, the Audio
-      PLL clock adn the I2S mux clock are optional and should only be set
-      together, when Master Mode is required.
+(1) : Only the peripheral clock is required. The generated clock and the I2S
+      mux clock are optional and should only be set together, when Master Mode
+      is required.
 
 Example:
 
@@ -40,8 +39,8 @@ Example:
                        (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
                         AT91_XDMAC_DT_PERID(32))>;
                dma-names = "tx", "rx";
-               clocks = <&i2s0_clk>, <&i2s0_gclk>, <&audio_pll_pmc>, <&i2s0muxck>;
-               clock-names = "pclk", "gclk", "aclk", "muxclk";
+               clocks = <&i2s0_clk>, <&i2s0_gclk>, <&i2s0muxck>;
+               clock-names = "pclk", "gclk", "muxclk";
                pinctrl-names = "default";
                pinctrl-0 = <&pinctrl_i2s0_default>;
        };