arm64: dts: qcom: sc8180x: Move DisplayPort for MMCX

The DisplayPort blocks are powered by MMCX and should be described as
such to ensure that power votes are done on the right resource.

This also solves the problem that sync_state is unaware of the DP
controllers needing MMCX to be kept alive during boot. As such this
change also fixes occasionally seen crashes during boot due to
undervoltage of MMCX.

Fixes: 494dec9b6f54 ("arm64: dts: qcom: sc8180x: Add display and gpu nodes")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230612220739.1886155-1-quic_bjorande@quicinc.com

diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
index 88015742315bef6a569ccfe2df062d30da6b3b21..5276d4bfdf4e66d18bffc2332a75cac913861f60 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -2966,7 +2966,7 @@
                                #sound-dai-cells = <0>;
 
                                operating-points-v2 = <&dp0_opp_table>;
-                               power-domains = <&rpmhpd SC8180X_CX>;
+                               power-domains = <&rpmhpd SC8180X_MMCX>;
 
                                status = "disabled";
 
@@ -3040,7 +3040,7 @@
                                #sound-dai-cells = <0>;
 
                                operating-points-v2 = <&dp0_opp_table>;
-                               power-domains = <&rpmhpd SC8180X_CX>;
+                               power-domains = <&rpmhpd SC8180X_MMCX>;
 
                                status = "disabled";
 
@@ -3114,7 +3114,7 @@
                                #sound-dai-cells = <0>;
 
                                operating-points-v2 = <&edp_opp_table>;
-                               power-domains = <&rpmhpd SC8180X_CX>;
+                               power-domains = <&rpmhpd SC8180X_MMCX>;
 
                                status = "disabled";