For different firmware type, it could use different IDMEM mode, so reset
it to default to avoid encountering error during we bisect firmware
version, like
rtw89_8852be 0000:03:00.0: Firmware version 0.29.26.0, cmd version 0, type 5
rtw89_8852be 0000:03:00.0: Firmware version 0.29.26.0, cmd version 0, type 3
rtw89_8852be 0000:03:00.0: fw security fail
rtw89_8852be 0000:03:00.0: download firmware fail
rtw89_8852be 0000:03:00.0: [ERR]fwdl 0x1E0 = 0x62
rtw89_8852be 0000:03:00.0: [ERR]fwdl 0x83F2 = 0x8
rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb8931154
rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb8931154
rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb8931150
rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb8931154
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230123065401.14174-5-pkshih@realtek.com
val |= B_AX_WCPU_FWDL_EN;
rtw89_write32(rtwdev, R_AX_WCPU_FW_CTRL, val);
+
+ if (rtwdev->chip->chip_id == RTL8852B)
+ rtw89_write32_mask(rtwdev, R_AX_SEC_CTRL,
+ B_AX_SEC_IDMEM_SIZE_CONFIG_MASK, 0x2);
+
rtw89_write16_mask(rtwdev, R_AX_BOOT_REASON, B_AX_BOOT_REASON_MASK,
boot_reason);
rtw89_write32_set(rtwdev, R_AX_PLATFORM_ENABLE, B_AX_WCPU_EN);
#define B_AX_S1_LDO2PWRCUT_F BIT(23)
#define B_AX_S0_LDO_VSEL_F_MASK GENMASK(22, 21)
+#define R_AX_SEC_CTRL 0x0C00
+#define B_AX_SEC_IDMEM_SIZE_CONFIG_MASK GENMASK(17, 16)
+
#define R_AX_FILTER_MODEL_ADDR 0x0C04
#define R_AX_HAXI_INIT_CFG1 0x1000