arm64: dts: qcom: sm6115: Add mdss_ prefix to mdss nodes

Add a mdss_ prefix to mdss nodes to keep them all near each other
when referencing them by label in device DTs.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230119101644.10711-1-konrad.dybcio@linaro.org

diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index 3eccfb8c16ce943dc993e2fae40a855930c3a7a9..500f47d2efbdebabe3cbf4446138da8d842c5f87 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -1105,7 +1105,7 @@
                                        port@0 {
                                                reg = <0>;
                                                dpu_intf1_out: endpoint {
-                                                       remote-endpoint = <&dsi0_in>;
+                                                       remote-endpoint = <&mdss_dsi0_in>;
                                                };
                                        };
                                };
@@ -1140,7 +1140,7 @@
                                };
                        };
 
-                       dsi0: dsi@5e94000 {
+                       mdss_dsi0: dsi@5e94000 {
                                compatible = "qcom,dsi-ctrl-6g-qcm2290";
                                reg = <0x05e94000 0x400>;
                                reg-names = "dsi_ctrl";
@@ -1163,11 +1163,11 @@
 
                                assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
                                                  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-                               assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+                               assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
 
                                operating-points-v2 = <&dsi_opp_table>;
                                power-domains = <&rpmpd SM6115_VDDCX>;
-                               phys = <&dsi0_phy>;
+                               phys = <&mdss_dsi0_phy>;
 
                                #address-cells = <1>;
                                #size-cells = <0>;
@@ -1180,14 +1180,14 @@
 
                                        port@0 {
                                                reg = <0>;
-                                               dsi0_in: endpoint {
+                                               mdss_dsi0_in: endpoint {
                                                        remote-endpoint = <&dpu_intf1_out>;
                                                };
                                        };
 
                                        port@1 {
                                                reg = <1>;
-                                               dsi0_out: endpoint {
+                                               mdss_dsi0_out: endpoint {
                                                };
                                        };
                                };
@@ -1212,7 +1212,7 @@
                                };
                        };
 
-                       dsi0_phy: phy@5e94400 {
+                       mdss_dsi0_phy: phy@5e94400 {
                                compatible = "qcom,dsi-phy-14nm-2290";
                                reg = <0x05e94400 0x100>,
                                      <0x05e94500 0x300>,
@@ -1237,8 +1237,8 @@
                        reg = <0x05f00000 0x20000>;
                        clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
                                 <&sleep_clk>,
-                                <&dsi0_phy 0>,
-                                <&dsi0_phy 1>,
+                                <&mdss_dsi0_phy 0>,
+                                <&mdss_dsi0_phy 1>,
                                 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>;
                        #clock-cells = <1>;
                        #reset-cells = <1>;