I915_WRITE(BCLRPAT(crtc->pipe), 0);
}
+static int valleyview_get_vco(struct drm_i915_private *dev_priv)
+{
+ int vco;
+
+ switch (dev_priv->mem_freq) {
+ default:
+ case 800:
+ vco = 800;
+ break;
+ case 1066:
+ vco = 1600;
+ break;
+ case 1333:
+ vco = 2000;
+ break;
+ }
+
+ return vco;
+}
+
+/* Adjust CDclk dividers to allow high res or save power if possible */
+static void valleyview_set_cdclk(struct drm_device *dev, int cdclk)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 val, cmd;
+
+ if (cdclk >= 320) /* jump to highest voltage for 400MHz too */
+ cmd = 2;
+ else if (cdclk == 266)
+ cmd = 1;
+ else
+ cmd = 0;
+
+ mutex_lock(&dev_priv->rps.hw_lock);
+ val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ);
+ val &= ~DSPFREQGUAR_MASK;
+ val |= (cmd << DSPFREQGUAR_SHIFT);
+ vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val);
+ if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) &
+ DSPFREQSTAT_MASK) == (cmd << DSPFREQSTAT_SHIFT),
+ 50)) {
+ DRM_ERROR("timed out waiting for CDclk change\n");
+ }
+ mutex_unlock(&dev_priv->rps.hw_lock);
+
+ if (cdclk == 400) {
+ u32 divider, vco;
+
+ vco = valleyview_get_vco(dev_priv);
+ divider = ((vco << 1) / cdclk) - 1;
+
+ mutex_lock(&dev_priv->dpio_lock);
+ /* adjust cdclk divider */
+ val = vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL);
+ val &= ~0xf;
+ val |= divider;
+ vlv_cck_write(dev_priv, CCK_DISPLAY_CLOCK_CONTROL, val);
+ mutex_unlock(&dev_priv->dpio_lock);
+ }
+
+ mutex_lock(&dev_priv->dpio_lock);
+ /* adjust self-refresh exit latency value */
+ val = vlv_bunit_read(dev_priv, BUNIT_REG_BISOC);
+ val &= ~0x7f;
+
+ /*
+ * For high bandwidth configs, we set a higher latency in the bunit
+ * so that the core display fetch happens in time to avoid underruns.
+ */
+ if (cdclk == 400)
+ val |= 4500 / 250; /* 4.5 usec */
+ else
+ val |= 3000 / 250; /* 3.0 usec */
+ vlv_bunit_write(dev_priv, BUNIT_REG_BISOC, val);
+ mutex_unlock(&dev_priv->dpio_lock);
+
+ /* Since we changed the CDclk, we need to update the GMBUSFREQ too */
+ intel_i2c_reset(dev);
+}
+
+static int valleyview_cur_cdclk(struct drm_i915_private *dev_priv)
+{
+ int cur_cdclk, vco;
+ int divider;
+
+ vco = valleyview_get_vco(dev_priv);
+
+ mutex_lock(&dev_priv->dpio_lock);
+ divider = vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL);
+ mutex_unlock(&dev_priv->dpio_lock);
+
+ divider &= 0xf;
+
+ cur_cdclk = (vco << 1) / (divider + 1);
+
+ return cur_cdclk;
+}
+
+static int valleyview_calc_cdclk(struct drm_i915_private *dev_priv,
+ int max_pixclk)
+{
+ int cur_cdclk;
+
+ cur_cdclk = valleyview_cur_cdclk(dev_priv);
+
+ /*
+ * Really only a few cases to deal with, as only 4 CDclks are supported:
+ * 200MHz
+ * 267MHz
+ * 320MHz
+ * 400MHz
+ * So we check to see whether we're above 90% of the lower bin and
+ * adjust if needed.
+ */
+ if (max_pixclk > 288000) {
+ return 400;
+ } else if (max_pixclk > 240000) {
+ return 320;
+ } else
+ return 266;
+ /* Looks like the 200MHz CDclk freq doesn't work on some configs */
+}
+
+static int intel_mode_max_pixclk(struct drm_i915_private *dev_priv,
+ unsigned modeset_pipes,
+ struct intel_crtc_config *pipe_config)
+{
+ struct drm_device *dev = dev_priv->dev;
+ struct intel_crtc *intel_crtc;
+ int max_pixclk = 0;
+
+ list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list,
+ base.head) {
+ if (modeset_pipes & (1 << intel_crtc->pipe))
+ max_pixclk = max(max_pixclk,
+ pipe_config->adjusted_mode.crtc_clock);
+ else if (intel_crtc->base.enabled)
+ max_pixclk = max(max_pixclk,
+ intel_crtc->config.adjusted_mode.crtc_clock);
+ }
+
+ return max_pixclk;
+}
+
+static void valleyview_modeset_global_pipes(struct drm_device *dev,
+ unsigned *prepare_pipes,
+ unsigned modeset_pipes,
+ struct intel_crtc_config *pipe_config)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc;
+ int max_pixclk = intel_mode_max_pixclk(dev_priv, modeset_pipes,
+ pipe_config);
+ int cur_cdclk = valleyview_cur_cdclk(dev_priv);
+
+ if (valleyview_calc_cdclk(dev_priv, max_pixclk) == cur_cdclk)
+ return;
+
+ list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list,
+ base.head)
+ if (intel_crtc->base.enabled)
+ *prepare_pipes |= (1 << intel_crtc->pipe);
+}
+
+static void valleyview_modeset_global_resources(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int max_pixclk = intel_mode_max_pixclk(dev_priv, 0, NULL);
+ int cur_cdclk = valleyview_cur_cdclk(dev_priv);
+ int req_cdclk = valleyview_calc_cdclk(dev_priv, max_pixclk);
+
+ if (req_cdclk != cur_cdclk)
+ valleyview_set_cdclk(dev, req_cdclk);
+}
+
static void valleyview_crtc_enable(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
"[modeset]");
}
+ /*
+ * See if the config requires any additional preparation, e.g.
+ * to adjust global state with pipes off. We need to do this
+ * here so we can get the modeset_pipe updated config for the new
+ * mode set on this crtc. For other crtcs we need to use the
+ * adjusted_mode bits in the crtc directly.
+ */
+ if (IS_VALLEYVIEW(dev))
+ valleyview_modeset_global_pipes(dev, &prepare_pipes,
+ modeset_pipes, pipe_config);
+
for_each_intel_crtc_masked(dev, disable_pipes, intel_crtc)
intel_crtc_disable(&intel_crtc->base);
}
} else if (IS_G4X(dev)) {
dev_priv->display.write_eld = g4x_write_eld;
+ } else if (IS_VALLEYVIEW(dev)) {
+ dev_priv->display.modeset_global_resources =
+ valleyview_modeset_global_resources;
}
/* Default just returns -ENODEV to indicate unsupported */
projects / linux.git / commitdiff