ARM: dts: qcom: msm8974-FP2: We're msm8974pro

Fairphone 2 always uses Snapdragon 801, a.k.a msm8974pro so change the
include and filename to that.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220421211936.345168-1-luca@z3ntu.xyz

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 56aa6fc4d3a492f28a70332ee38b4392cd86b88a..b1e9ed1c839384aefaac0267031d75f7ea94d958 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1001,10 +1001,10 @@ dtb-$(CONFIG_ARCH_QCOM) += \
        qcom-msm8660-surf.dtb \
        qcom-msm8916-samsung-serranove.dtb \
        qcom-msm8960-cdp.dtb \
-       qcom-msm8974-fairphone-fp2.dtb \
        qcom-msm8974-lge-nexus5-hammerhead.dtb \
        qcom-msm8974-sony-xperia-rhine-amami.dtb \
        qcom-msm8974-sony-xperia-rhine-honami.dtb \
+       qcom-msm8974pro-fairphone-fp2.dtb \
        qcom-msm8974pro-samsung-klte.dtb \
        qcom-msm8974pro-sony-xperia-shinano-castor.dtb \
        qcom-mdm9615-wp8548-mangoh-green.dtb \

diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
deleted file mode 100644 (file)
index 2b9c5a8..0000000
--- a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
+++ /dev/null
@@ -1,393 +0,0 @@
-#include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-
-/ {
-       model = "Fairphone 2";
-       compatible = "fairphone,fp2", "qcom,msm8974";
-
-       aliases {
-               serial0 = &blsp1_uart2;
-       };
-
-       chosen {
-               stdout-path = "serial0:115200n8";
-       };
-
-       gpio-keys {
-               compatible = "gpio-keys";
-
-               pinctrl-names = "default";
-               pinctrl-0 = <&gpio_keys_pin_a>;
-
-               camera-snapshot {
-                       label = "camera_snapshot";
-                       gpios = <&pm8941_gpios 1 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_CAMERA>;
-                       wakeup-source;
-                       debounce-interval = <15>;
-               };
-
-               volume-down {
-                       label = "volume_down";
-                       gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_VOLUMEDOWN>;
-                       wakeup-source;
-                       debounce-interval = <15>;
-               };
-
-               volume-up {
-                       label = "volume_up";
-                       gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_VOLUMEUP>;
-                       wakeup-source;
-                       debounce-interval = <15>;
-               };
-       };
-
-       vibrator {
-               compatible = "gpio-vibrator";
-               enable-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
-               vcc-supply = <&pm8941_l18>;
-       };
-};
-
-&blsp1_uart2 {
-       status = "okay";
-};
-
-&imem {
-       reboot-mode {
-               mode-normal     = <0x77665501>;
-               mode-bootloader = <0x77665500>;
-               mode-recovery   = <0x77665502>;
-       };
-};
-
-&otg {
-       status = "okay";
-
-       phys = <&usb_hs1_phy>;
-       phy-select = <&tcsr 0xb000 0>;
-       extcon = <&smbb>, <&usb_id>;
-       vbus-supply = <&chg_otg>;
-
-       hnp-disable;
-       srp-disable;
-       adp-disable;
-
-       ulpi {
-               phy@a {
-                       status = "okay";
-
-                       v1p8-supply = <&pm8941_l6>;
-                       v3p3-supply = <&pm8941_l24>;
-
-                       extcon = <&smbb>;
-                       qcom,init-seq = /bits/ 8 <0x1 0x64>;
-               };
-       };
-};
-
-&pm8941_gpios {
-       gpio_keys_pin_a: gpio-keys-active {
-               pins = "gpio1", "gpio2", "gpio5";
-               function = "normal";
-
-               bias-pull-up;
-               power-source = <PM8941_GPIO_S3>;
-       };
-};
-
-&pronto {
-       status = "okay";
-
-       vddmx-supply = <&pm8841_s1>;
-       vddcx-supply = <&pm8841_s2>;
-       vddpx-supply = <&pm8941_s3>;
-
-       pinctrl-names = "default";
-       pinctrl-0 = <&wcnss_pin_a>;
-
-       iris {
-               vddxo-supply = <&pm8941_l6>;
-               vddrfa-supply = <&pm8941_l11>;
-               vddpa-supply = <&pm8941_l19>;
-               vdddig-supply = <&pm8941_s3>;
-       };
-
-       smd-edge {
-               qcom,remote-pid = <4>;
-               label = "pronto";
-
-               wcnss {
-                       status = "okay";
-               };
-       };
-};
-
-&rpm_requests {
-       pm8841-regulators {
-               compatible = "qcom,rpm-pm8841-regulators";
-
-               pm8841_s1: s1 {
-                       regulator-min-microvolt = <675000>;
-                       regulator-max-microvolt = <1050000>;
-               };
-
-               pm8841_s2: s2 {
-                       regulator-min-microvolt = <500000>;
-                       regulator-max-microvolt = <1050000>;
-               };
-
-               pm8841_s3: s3 {
-                       regulator-min-microvolt = <1050000>;
-                       regulator-max-microvolt = <1050000>;
-               };
-       };
-
-       pm8941-regulators {
-               compatible = "qcom,rpm-pm8941-regulators";
-
-               vdd_l1_l3-supply = <&pm8941_s1>;
-               vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
-               vdd_l4_l11-supply = <&pm8941_s1>;
-               vdd_l5_l7-supply = <&pm8941_s2>;
-               vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
-               vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
-               vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
-               vdd_l21-supply = <&vreg_boost>;
-
-               pm8941_s1: s1 {
-                       regulator-min-microvolt = <1300000>;
-                       regulator-max-microvolt = <1300000>;
-                       regulator-always-on;
-                       regulator-boot-on;
-               };
-
-               pm8941_s2: s2 {
-                       regulator-min-microvolt = <2150000>;
-                       regulator-max-microvolt = <2150000>;
-                       regulator-boot-on;
-               };
-
-               pm8941_s3: s3 {
-                       regulator-min-microvolt = <1800000>;
-                       regulator-max-microvolt = <1800000>;
-                       regulator-always-on;
-                       regulator-boot-on;
-               };
-
-               pm8941_l1: l1 {
-                       regulator-min-microvolt = <1225000>;
-                       regulator-max-microvolt = <1225000>;
-                       regulator-always-on;
-                       regulator-boot-on;
-               };
-
-               pm8941_l2: l2 {
-                       regulator-min-microvolt = <1200000>;
-                       regulator-max-microvolt = <1200000>;
-               };
-
-               pm8941_l3: l3 {
-                       regulator-min-microvolt = <1225000>;
-                       regulator-max-microvolt = <1225000>;
-               };
-
-               pm8941_l4: l4 {
-                       regulator-min-microvolt = <1225000>;
-                       regulator-max-microvolt = <1225000>;
-               };
-
-               pm8941_l5: l5 {
-                       regulator-min-microvolt = <1800000>;
-                       regulator-max-microvolt = <1800000>;
-               };
-
-               pm8941_l6: l6 {
-                       regulator-min-microvolt = <1800000>;
-                       regulator-max-microvolt = <1800000>;
-                       regulator-boot-on;
-               };
-
-               pm8941_l7: l7 {
-                       regulator-min-microvolt = <1800000>;
-                       regulator-max-microvolt = <1800000>;
-                       regulator-boot-on;
-               };
-
-               pm8941_l8: l8 {
-                       regulator-min-microvolt = <1800000>;
-                       regulator-max-microvolt = <1800000>;
-               };
-
-               pm8941_l9: l9 {
-                       regulator-min-microvolt = <1800000>;
-                       regulator-max-microvolt = <2950000>;
-               };
-
-               pm8941_l10: l10 {
-                       regulator-min-microvolt = <1800000>;
-                       regulator-max-microvolt = <2950000>;
-               };
-
-               pm8941_l11: l11 {
-                       regulator-min-microvolt = <1225000>;
-                       regulator-max-microvolt = <1350000>;
-               };
-
-               pm8941_l12: l12 {
-                       regulator-min-microvolt = <1800000>;
-                       regulator-max-microvolt = <1800000>;
-                       regulator-always-on;
-                       regulator-boot-on;
-               };
-
-               pm8941_l13: l13 {
-                       regulator-min-microvolt = <1800000>;
-                       regulator-max-microvolt = <2950000>;
-                       regulator-boot-on;
-               };
-
-               pm8941_l14: l14 {
-                       regulator-min-microvolt = <1800000>;
-                       regulator-max-microvolt = <1800000>;
-               };
-
-               pm8941_l15: l15 {
-                       regulator-min-microvolt = <2050000>;
-                       regulator-max-microvolt = <2050000>;
-               };
-
-               pm8941_l16: l16 {
-                       regulator-min-microvolt = <2700000>;
-                       regulator-max-microvolt = <2700000>;
-               };
-
-               pm8941_l17: l17 {
-                       regulator-min-microvolt = <2850000>;
-                       regulator-max-microvolt = <2850000>;
-               };
-
-               pm8941_l18: l18 {
-                       regulator-min-microvolt = <2850000>;
-                       regulator-max-microvolt = <2850000>;
-               };
-
-               pm8941_l19: l19 {
-                       regulator-min-microvolt = <2900000>;
-                       regulator-max-microvolt = <3350000>;
-               };
-
-               pm8941_l20: l20 {
-                       regulator-min-microvolt = <2950000>;
-                       regulator-max-microvolt = <2950000>;
-                       regulator-system-load = <200000>;
-                       regulator-allow-set-load;
-                       regulator-boot-on;
-               };
-
-               pm8941_l21: l21 {
-                       regulator-min-microvolt = <2950000>;
-                       regulator-max-microvolt = <2950000>;
-                       regulator-boot-on;
-               };
-
-               pm8941_l22: l22 {
-                       regulator-min-microvolt = <3000000>;
-                       regulator-max-microvolt = <3300000>;
-               };
-
-               pm8941_l23: l23 {
-                       regulator-min-microvolt = <3000000>;
-                       regulator-max-microvolt = <3000000>;
-               };
-
-               pm8941_l24: l24 {
-                       regulator-min-microvolt = <3075000>;
-                       regulator-max-microvolt = <3075000>;
-                       regulator-boot-on;
-               };
-       };
-};
-
-&sdhc_1 {
-       status = "okay";
-
-       vmmc-supply = <&pm8941_l20>;
-       vqmmc-supply = <&pm8941_s3>;
-
-       pinctrl-names = "default", "sleep";
-       pinctrl-0 = <&sdc1_on>;
-       pinctrl-1 = <&sdc1_off>;
-};
-
-&sdhc_2 {
-       status = "okay";
-
-       vmmc-supply = <&pm8941_l21>;
-       vqmmc-supply = <&pm8941_l13>;
-
-       pinctrl-names = "default", "sleep";
-       pinctrl-0 = <&sdc2_on>;
-       pinctrl-1 = <&sdc2_off>;
-};
-
-&tlmm {
-       sdc1_on: sdc1-on {
-               clk {
-                       pins = "sdc1_clk";
-                       drive-strength = <16>;
-                       bias-disable;
-               };
-
-               cmd-data {
-                       pins = "sdc1_cmd", "sdc1_data";
-                       drive-strength = <10>;
-                       bias-pull-up;
-               };
-       };
-
-       sdc2_on: sdc2-on {
-               clk {
-                       pins = "sdc2_clk";
-                       drive-strength = <10>;
-                       bias-disable;
-               };
-
-               cmd-data {
-                       pins = "sdc2_cmd", "sdc2_data";
-                       drive-strength = <6>;
-                       bias-pull-up;
-               };
-       };
-
-       wcnss_pin_a: wcnss-pin-active {
-               wlan {
-                       pins =  "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
-                       function = "wlan";
-
-                       drive-strength = <6>;
-                       bias-pull-down;
-               };
-
-               bt {
-                       pins = "gpio35", "gpio43", "gpio44";
-                       function = "bt";
-
-                       drive-strength = <2>;
-                       bias-pull-down;
-               };
-
-               fm {
-                       pins = "gpio41", "gpio42";
-                       function = "fm";
-
-                       drive-strength = <2>;
-                       bias-pull-down;
-               };
-       };
-};

diff --git a/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts
new file mode 100644 (file)
index 0000000..1856d56
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts
@@ -0,0 +1,393 @@
+#include "qcom-msm8974pro.dtsi"
+#include "qcom-pm8841.dtsi"
+#include "qcom-pm8941.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+       model = "Fairphone 2";
+       compatible = "fairphone,fp2", "qcom,msm8974";
+
+       aliases {
+               serial0 = &blsp1_uart2;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys";
+
+               pinctrl-names = "default";
+               pinctrl-0 = <&gpio_keys_pin_a>;
+
+               camera-snapshot {
+                       label = "camera_snapshot";
+                       gpios = <&pm8941_gpios 1 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_CAMERA>;
+                       wakeup-source;
+                       debounce-interval = <15>;
+               };
+
+               volume-down {
+                       label = "volume_down";
+                       gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_VOLUMEDOWN>;
+                       wakeup-source;
+                       debounce-interval = <15>;
+               };
+
+               volume-up {
+                       label = "volume_up";
+                       gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_VOLUMEUP>;
+                       wakeup-source;
+                       debounce-interval = <15>;
+               };
+       };
+
+       vibrator {
+               compatible = "gpio-vibrator";
+               enable-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+               vcc-supply = <&pm8941_l18>;
+       };
+};
+
+&blsp1_uart2 {
+       status = "okay";
+};
+
+&imem {
+       reboot-mode {
+               mode-normal     = <0x77665501>;
+               mode-bootloader = <0x77665500>;
+               mode-recovery   = <0x77665502>;
+       };
+};
+
+&otg {
+       status = "okay";
+
+       phys = <&usb_hs1_phy>;
+       phy-select = <&tcsr 0xb000 0>;
+       extcon = <&smbb>, <&usb_id>;
+       vbus-supply = <&chg_otg>;
+
+       hnp-disable;
+       srp-disable;
+       adp-disable;
+
+       ulpi {
+               phy@a {
+                       status = "okay";
+
+                       v1p8-supply = <&pm8941_l6>;
+                       v3p3-supply = <&pm8941_l24>;
+
+                       extcon = <&smbb>;
+                       qcom,init-seq = /bits/ 8 <0x1 0x64>;
+               };
+       };
+};
+
+&pm8941_gpios {
+       gpio_keys_pin_a: gpio-keys-active {
+               pins = "gpio1", "gpio2", "gpio5";
+               function = "normal";
+
+               bias-pull-up;
+               power-source = <PM8941_GPIO_S3>;
+       };
+};
+
+&pronto {
+       status = "okay";
+
+       vddmx-supply = <&pm8841_s1>;
+       vddcx-supply = <&pm8841_s2>;
+       vddpx-supply = <&pm8941_s3>;
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&wcnss_pin_a>;
+
+       iris {
+               vddxo-supply = <&pm8941_l6>;
+               vddrfa-supply = <&pm8941_l11>;
+               vddpa-supply = <&pm8941_l19>;
+               vdddig-supply = <&pm8941_s3>;
+       };
+
+       smd-edge {
+               qcom,remote-pid = <4>;
+               label = "pronto";
+
+               wcnss {
+                       status = "okay";
+               };
+       };
+};
+
+&rpm_requests {
+       pm8841-regulators {
+               compatible = "qcom,rpm-pm8841-regulators";
+
+               pm8841_s1: s1 {
+                       regulator-min-microvolt = <675000>;
+                       regulator-max-microvolt = <1050000>;
+               };
+
+               pm8841_s2: s2 {
+                       regulator-min-microvolt = <500000>;
+                       regulator-max-microvolt = <1050000>;
+               };
+
+               pm8841_s3: s3 {
+                       regulator-min-microvolt = <1050000>;
+                       regulator-max-microvolt = <1050000>;
+               };
+       };
+
+       pm8941-regulators {
+               compatible = "qcom,rpm-pm8941-regulators";
+
+               vdd_l1_l3-supply = <&pm8941_s1>;
+               vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+               vdd_l4_l11-supply = <&pm8941_s1>;
+               vdd_l5_l7-supply = <&pm8941_s2>;
+               vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+               vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+               vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+               vdd_l21-supply = <&vreg_boost>;
+
+               pm8941_s1: s1 {
+                       regulator-min-microvolt = <1300000>;
+                       regulator-max-microvolt = <1300000>;
+                       regulator-always-on;
+                       regulator-boot-on;
+               };
+
+               pm8941_s2: s2 {
+                       regulator-min-microvolt = <2150000>;
+                       regulator-max-microvolt = <2150000>;
+                       regulator-boot-on;
+               };
+
+               pm8941_s3: s3 {
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <1800000>;
+                       regulator-always-on;
+                       regulator-boot-on;
+               };
+
+               pm8941_l1: l1 {
+                       regulator-min-microvolt = <1225000>;
+                       regulator-max-microvolt = <1225000>;
+                       regulator-always-on;
+                       regulator-boot-on;
+               };
+
+               pm8941_l2: l2 {
+                       regulator-min-microvolt = <1200000>;
+                       regulator-max-microvolt = <1200000>;
+               };
+
+               pm8941_l3: l3 {
+                       regulator-min-microvolt = <1225000>;
+                       regulator-max-microvolt = <1225000>;
+               };
+
+               pm8941_l4: l4 {
+                       regulator-min-microvolt = <1225000>;
+                       regulator-max-microvolt = <1225000>;
+               };
+
+               pm8941_l5: l5 {
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <1800000>;
+               };
+
+               pm8941_l6: l6 {
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <1800000>;
+                       regulator-boot-on;
+               };
+
+               pm8941_l7: l7 {
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <1800000>;
+                       regulator-boot-on;
+               };
+
+               pm8941_l8: l8 {
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <1800000>;
+               };
+
+               pm8941_l9: l9 {
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <2950000>;
+               };
+
+               pm8941_l10: l10 {
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <2950000>;
+               };
+
+               pm8941_l11: l11 {
+                       regulator-min-microvolt = <1225000>;
+                       regulator-max-microvolt = <1350000>;
+               };
+
+               pm8941_l12: l12 {
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <1800000>;
+                       regulator-always-on;
+                       regulator-boot-on;
+               };
+
+               pm8941_l13: l13 {
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <2950000>;
+                       regulator-boot-on;
+               };
+
+               pm8941_l14: l14 {
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <1800000>;
+               };
+
+               pm8941_l15: l15 {
+                       regulator-min-microvolt = <2050000>;
+                       regulator-max-microvolt = <2050000>;
+               };
+
+               pm8941_l16: l16 {
+                       regulator-min-microvolt = <2700000>;
+                       regulator-max-microvolt = <2700000>;
+               };
+
+               pm8941_l17: l17 {
+                       regulator-min-microvolt = <2850000>;
+                       regulator-max-microvolt = <2850000>;
+               };
+
+               pm8941_l18: l18 {
+                       regulator-min-microvolt = <2850000>;
+                       regulator-max-microvolt = <2850000>;
+               };
+
+               pm8941_l19: l19 {
+                       regulator-min-microvolt = <2900000>;
+                       regulator-max-microvolt = <3350000>;
+               };
+
+               pm8941_l20: l20 {
+                       regulator-min-microvolt = <2950000>;
+                       regulator-max-microvolt = <2950000>;
+                       regulator-system-load = <200000>;
+                       regulator-allow-set-load;
+                       regulator-boot-on;
+               };
+
+               pm8941_l21: l21 {
+                       regulator-min-microvolt = <2950000>;
+                       regulator-max-microvolt = <2950000>;
+                       regulator-boot-on;
+               };
+
+               pm8941_l22: l22 {
+                       regulator-min-microvolt = <3000000>;
+                       regulator-max-microvolt = <3300000>;
+               };
+
+               pm8941_l23: l23 {
+                       regulator-min-microvolt = <3000000>;
+                       regulator-max-microvolt = <3000000>;
+               };
+
+               pm8941_l24: l24 {
+                       regulator-min-microvolt = <3075000>;
+                       regulator-max-microvolt = <3075000>;
+                       regulator-boot-on;
+               };
+       };
+};
+
+&sdhc_1 {
+       status = "okay";
+
+       vmmc-supply = <&pm8941_l20>;
+       vqmmc-supply = <&pm8941_s3>;
+
+       pinctrl-names = "default", "sleep";
+       pinctrl-0 = <&sdc1_on>;
+       pinctrl-1 = <&sdc1_off>;
+};
+
+&sdhc_2 {
+       status = "okay";
+
+       vmmc-supply = <&pm8941_l21>;
+       vqmmc-supply = <&pm8941_l13>;
+
+       pinctrl-names = "default", "sleep";
+       pinctrl-0 = <&sdc2_on>;
+       pinctrl-1 = <&sdc2_off>;
+};
+
+&tlmm {
+       sdc1_on: sdc1-on {
+               clk {
+                       pins = "sdc1_clk";
+                       drive-strength = <16>;
+                       bias-disable;
+               };
+
+               cmd-data {
+                       pins = "sdc1_cmd", "sdc1_data";
+                       drive-strength = <10>;
+                       bias-pull-up;
+               };
+       };
+
+       sdc2_on: sdc2-on {
+               clk {
+                       pins = "sdc2_clk";
+                       drive-strength = <10>;
+                       bias-disable;
+               };
+
+               cmd-data {
+                       pins = "sdc2_cmd", "sdc2_data";
+                       drive-strength = <6>;
+                       bias-pull-up;
+               };
+       };
+
+       wcnss_pin_a: wcnss-pin-active {
+               wlan {
+                       pins =  "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
+                       function = "wlan";
+
+                       drive-strength = <6>;
+                       bias-pull-down;
+               };
+
+               bt {
+                       pins = "gpio35", "gpio43", "gpio44";
+                       function = "bt";
+
+                       drive-strength = <2>;
+                       bias-pull-down;
+               };
+
+               fm {
+                       pins = "gpio41", "gpio42";
+                       function = "fm";
+
+                       drive-strength = <2>;
+                       bias-pull-down;
+               };
+       };
+};