media: hantro: Fix H264 motion vector buffer offset
authorJonas Karlman <jonas@kwiboo.se>
Wed, 6 Nov 2019 22:34:20 +0000 (23:34 +0100)
committerMauro Carvalho Chehab <mchehab@kernel.org>
Sun, 10 Nov 2019 16:57:00 +0000 (17:57 +0100)
A decoded 8-bit 4:2:0 frame need memory for up to 448 bytes per
macroblock and is laid out in memory as follow:

+---------------------------+
| Y-plane   256 bytes x MBs |
+---------------------------+
| UV-plane  128 bytes x MBs |
+---------------------------+
| MV buffer  64 bytes x MBs |
+---------------------------+

The motion vector buffer offset is currently correct for 4:2:0 because
the extra space for motion vectors is overallocated with an extra
64 bytes x MBs.

Wrong offset for both destination and motion vector buffer are used
for the bottom field of field encoded content, wrong offset is
also used for 4:0:0 (monochrome) content.

Fix this by setting the motion vector address to the expected 384 bytes
x MBs offset for 4:2:0 and 256 bytes x MBs offset for 4:0:0 content.

Also use correct destination and motion vector buffer offset
for the bottom field of field encoded content.

While at it also extend the check for 4:0:0 (monochrome) to include an
additional check for High Profile (100).

Fixes: dea0a82f3d22 ("media: hantro: Add support for H264 decoding on G1")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
drivers/staging/media/hantro/hantro_g1_h264_dec.c

index 70a6b5b26477f8dfa10a5c92aef005e4c6412728..30d977c3d529cde2afe45a73d9fb7f5cea82db83 100644 (file)
@@ -81,7 +81,7 @@ static void set_params(struct hantro_ctx *ctx)
                reg |= G1_REG_DEC_CTRL4_CABAC_E;
        if (sps->flags & V4L2_H264_SPS_FLAG_DIRECT_8X8_INFERENCE)
                reg |= G1_REG_DEC_CTRL4_DIR_8X8_INFER_E;
-       if (sps->chroma_format_idc == 0)
+       if (sps->profile_idc >= 100 && sps->chroma_format_idc == 0)
                reg |= G1_REG_DEC_CTRL4_BLACKWHITE_E;
        if (pps->flags & V4L2_H264_PPS_FLAG_WEIGHTED_PRED)
                reg |= G1_REG_DEC_CTRL4_WEIGHT_PRED_E;
@@ -234,6 +234,7 @@ static void set_buffers(struct hantro_ctx *ctx)
        struct vb2_v4l2_buffer *src_buf, *dst_buf;
        struct hantro_dev *vpu = ctx->dev;
        dma_addr_t src_dma, dst_dma;
+       size_t offset = 0;
 
        src_buf = hantro_get_src_buf(ctx);
        dst_buf = hantro_get_dst_buf(ctx);
@@ -244,18 +245,30 @@ static void set_buffers(struct hantro_ctx *ctx)
 
        /* Destination (decoded frame) buffer. */
        dst_dma = vb2_dma_contig_plane_dma_addr(&dst_buf->vb2_buf, 0);
-       vdpu_write_relaxed(vpu, dst_dma, G1_REG_ADDR_DST);
+       /* Adjust dma addr to start at second line for bottom field */
+       if (ctrls->slices[0].flags & V4L2_H264_SLICE_FLAG_BOTTOM_FIELD)
+               offset = ALIGN(ctx->src_fmt.width, MB_DIM);
+       vdpu_write_relaxed(vpu, dst_dma + offset, G1_REG_ADDR_DST);
 
        /* Higher profiles require DMV buffer appended to reference frames. */
        if (ctrls->sps->profile_idc > 66 && ctrls->decode->nal_ref_idc) {
-               size_t pic_size = ctx->h264_dec.pic_size;
-               size_t mv_offset = round_up(pic_size, 8);
-
+               unsigned int bytes_per_mb = 384;
+
+               /* DMV buffer for monochrome start directly after Y-plane */
+               if (ctrls->sps->profile_idc >= 100 &&
+                   ctrls->sps->chroma_format_idc == 0)
+                       bytes_per_mb = 256;
+               offset = bytes_per_mb * MB_WIDTH(ctx->src_fmt.width) *
+                        MB_HEIGHT(ctx->src_fmt.height);
+
+               /*
+                * DMV buffer is split in two for field encoded frames,
+                * adjust offset for bottom field
+                */
                if (ctrls->slices[0].flags & V4L2_H264_SLICE_FLAG_BOTTOM_FIELD)
-                       mv_offset += 32 * MB_WIDTH(ctx->dst_fmt.width);
-
-               vdpu_write_relaxed(vpu, dst_dma + mv_offset,
-                                  G1_REG_ADDR_DIR_MV);
+                       offset += 32 * MB_WIDTH(ctx->src_fmt.width) *
+                                 MB_HEIGHT(ctx->src_fmt.height);
+               vdpu_write_relaxed(vpu, dst_dma + offset, G1_REG_ADDR_DIR_MV);
        }
 
        /* Auxiliary buffer prepared in hantro_g1_h264_dec_prepare_table(). */