--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Condor board with R-Car V3H
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ * Copyright (C) 2018 Cogent Embedded, Inc.
+ */
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ serial0 = &scif0;
+ ethernet0 = &gether;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ d1_8v: regulator-2 {
+ compatible = "regulator-fixed";
+ regulator-name = "D1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ d3_3v: regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "D3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con: endpoint {
+ remote-endpoint = <&adv7511_out>;
+ };
+ };
+ };
+
+ lvds-decoder {
+ compatible = "thine,thc63lvd1024";
+ vcc-supply = <&d3_3v>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ thc63lvd1024_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ thc63lvd1024_out: endpoint {
+ remote-endpoint = <&adv7511_in>;
+ };
+ };
+ };
+ };
+
+ memory@48000000 {
+ device_type = "memory";
+ /* first 128MB is reserved for secure area. */
+ reg = <0 0x48000000 0 0x78000000>;
+ };
+
+ vddq_vin01: regulator-1 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDQ_VIN01";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ x1_clk: x1-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <148500000>;
+ };
+};
+
+&canfd {
+ pinctrl-0 = <&canfd0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ channel0 {
+ status = "okay";
+ };
+};
+
+&csi40 {
+ status = "okay";
+
+ ports {
+ port@0 {
+ csi40_in: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&max9286_out0>;
+ };
+ };
+ };
+};
+
+&csi41 {
+ status = "okay";
+
+ ports {
+ port@0 {
+ csi41_in: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&max9286_out1>;
+ };
+ };
+ };
+};
+
+&du {
+ clocks = <&cpg CPG_MOD 724>,
+ <&x1_clk>;
+ clock-names = "du.0", "dclkin.0";
+ status = "okay";
+};
+
+&extal_clk {
+ clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+ clock-frequency = <32768>;
+};
+
+&gether {
+ pinctrl-0 = <&gether_pins>;
+ pinctrl-names = "default";
+
+ phy-mode = "rgmii-id";
+ phy-handle = <&phy0>;
+ renesas,no-ether-link;
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-id0022.1622",
+ "ethernet-phy-ieee802.3-c22";
+ rxc-skew-ps = <1500>;
+ reg = <0>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&i2c0 {
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ io_expander0: gpio@20 {
+ compatible = "onnn,pca9654";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ io_expander1: gpio@21 {
+ compatible = "onnn,pca9654";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ hdmi@39 {
+ compatible = "adi,adv7511w";
+ reg = <0x39>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+ avdd-supply = <&d1_8v>;
+ dvdd-supply = <&d1_8v>;
+ pvdd-supply = <&d1_8v>;
+ bgvdd-supply = <&d1_8v>;
+ dvdd-3v-supply = <&d3_3v>;
+
+ adi,input-depth = <8>;
+ adi,input-colorspace = "rgb";
+ adi,input-clock = "1x";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7511_in: endpoint {
+ remote-endpoint = <&thc63lvd1024_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ adv7511_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+ };
+};
+
+&i2c1 {
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ gmsl0: gmsl-deserializer@48 {
+ compatible = "maxim,max9286";
+ reg = <0x48>;
+
+ maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>;
+ enable-gpios = <&io_expander0 0 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ };
+
+ port@3 {
+ reg = <3>;
+ };
+
+ port@4 {
+ reg = <4>;
+ max9286_out0: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&csi40_in>;
+ };
+ };
+ };
+
+ i2c-mux {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ status = "disabled";
+ };
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ status = "disabled";
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ status = "disabled";
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ status = "disabled";
+ };
+ };
+ };
+
+ gmsl1: gmsl-deserializer@4a {
+ compatible = "maxim,max9286";
+ reg = <0x4a>;
+
+ maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>;
+ enable-gpios = <&io_expander1 0 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ };
+
+ port@3 {
+ reg = <3>;
+ };
+
+ port@4 {
+ reg = <4>;
+ max9286_out1: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&csi41_in>;
+ };
+ };
+ };
+
+ i2c-mux {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ status = "disabled";
+ };
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ status = "disabled";
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ status = "disabled";
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ status = "disabled";
+ };
+ };
+ };
+};
+
+&lvds0 {
+ status = "okay";
+
+ ports {
+ port@1 {
+ lvds0_out: endpoint {
+ remote-endpoint = <&thc63lvd1024_in>;
+ };
+ };
+ };
+};
+
+&mmc0 {
+ pinctrl-0 = <&mmc_pins>;
+ pinctrl-1 = <&mmc_pins>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <&d3_3v>;
+ vqmmc-supply = <&vddq_vin01>;
+ mmc-hs200-1_8v;
+ bus-width = <8>;
+ no-sd;
+ no-sdio;
+ non-removable;
+ status = "okay";
+};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie_bus_clk {
+ clock-frequency = <100000000>;
+};
+
+&pcie_phy {
+ status = "okay";
+};
+
+&pfc {
+ canfd0_pins: canfd0 {
+ groups = "canfd0_data_a";
+ function = "canfd0";
+ };
+
+ gether_pins: gether {
+ groups = "gether_mdio_a", "gether_rgmii",
+ "gether_txcrefclk", "gether_txcrefclk_mega";
+ function = "gether";
+ };
+
+ i2c0_pins: i2c0 {
+ groups = "i2c0";
+ function = "i2c0";
+ };
+
+ i2c1_pins: i2c1 {
+ groups = "i2c1";
+ function = "i2c1";
+ };
+
+ mmc_pins: mmc {
+ groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
+ function = "mmc";
+ power-source = <1800>;
+ };
+
+ qspi0_pins: qspi0 {
+ groups = "qspi0_ctrl", "qspi0_data4";
+ function = "qspi0";
+ };
+
+ scif0_pins: scif0 {
+ groups = "scif0_data";
+ function = "scif0";
+ };
+
+ scif_clk_pins: scif_clk {
+ groups = "scif_clk_b";
+ function = "scif_clk";
+ };
+};
+
+&rpc {
+ pinctrl-0 = <&qspi0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ flash@0 {
+ compatible = "spansion,s25fs512s", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ spi-rx-bus-width = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ bootparam@0 {
+ reg = <0x00000000 0x040000>;
+ read-only;
+ };
+ cr7@40000 {
+ reg = <0x00040000 0x080000>;
+ read-only;
+ };
+ cert_header_sa3@c0000 {
+ reg = <0x000c0000 0x080000>;
+ read-only;
+ };
+ bl2@140000 {
+ reg = <0x00140000 0x040000>;
+ read-only;
+ };
+ cert_header_sa6@180000 {
+ reg = <0x00180000 0x040000>;
+ read-only;
+ };
+ bl31@1c0000 {
+ reg = <0x001c0000 0x460000>;
+ read-only;
+ };
+ uboot@640000 {
+ reg = <0x00640000 0x0c0000>;
+ read-only;
+ };
+ uboot-env@700000 {
+ reg = <0x00700000 0x040000>;
+ read-only;
+ };
+ dtb@740000 {
+ reg = <0x00740000 0x080000>;
+ };
+ kernel@7c0000 {
+ reg = <0x007c0000 0x1400000>;
+ };
+ user@1bc0000 {
+ reg = <0x01bc0000 0x2440000>;
+ };
+ };
+ };
+};
+
+&rwdt {
+ timeout-sec = <60>;
+ status = "okay";
+};
+
+&scif0 {
+ pinctrl-0 = <&scif0_pins>, <&scif_clk_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&scif_clk {
+ clock-frequency = <14745600>;
+};
/dts-v1/;
#include "r8a77980.dtsi"
-#include <dt-bindings/gpio/gpio.h>
+#include "condor-common.dtsi"
/ {
model = "Renesas Condor board based on r8a77980";
compatible = "renesas,condor", "renesas,r8a77980";
-
- aliases {
- i2c0 = &i2c0;
- i2c1 = &i2c1;
- i2c2 = &i2c2;
- i2c3 = &i2c3;
- i2c4 = &i2c4;
- i2c5 = &i2c5;
- serial0 = &scif0;
- ethernet0 = &gether;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- d1_8v: regulator-2 {
- compatible = "regulator-fixed";
- regulator-name = "D1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- d3_3v: regulator-0 {
- compatible = "regulator-fixed";
- regulator-name = "D3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- hdmi-out {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_con: endpoint {
- remote-endpoint = <&adv7511_out>;
- };
- };
- };
-
- lvds-decoder {
- compatible = "thine,thc63lvd1024";
- vcc-supply = <&d3_3v>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- thc63lvd1024_in: endpoint {
- remote-endpoint = <&lvds0_out>;
- };
- };
-
- port@2 {
- reg = <2>;
- thc63lvd1024_out: endpoint {
- remote-endpoint = <&adv7511_in>;
- };
- };
- };
- };
-
- memory@48000000 {
- device_type = "memory";
- /* first 128MB is reserved for secure area. */
- reg = <0 0x48000000 0 0x78000000>;
- };
-
- vddq_vin01: regulator-1 {
- compatible = "regulator-fixed";
- regulator-name = "VDDQ_VIN01";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- x1_clk: x1-clock {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <148500000>;
- };
-};
-
-&canfd {
- pinctrl-0 = <&canfd0_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- channel0 {
- status = "okay";
- };
-};
-
-&csi40 {
- status = "okay";
-
- ports {
- port@0 {
- csi40_in: endpoint {
- clock-lanes = <0>;
- data-lanes = <1 2 3 4>;
- remote-endpoint = <&max9286_out0>;
- };
- };
- };
-};
-
-&csi41 {
- status = "okay";
-
- ports {
- port@0 {
- csi41_in: endpoint {
- clock-lanes = <0>;
- data-lanes = <1 2 3 4>;
- remote-endpoint = <&max9286_out1>;
- };
- };
- };
-};
-
-&du {
- clocks = <&cpg CPG_MOD 724>,
- <&x1_clk>;
- clock-names = "du.0", "dclkin.0";
- status = "okay";
-};
-
-&extal_clk {
- clock-frequency = <16666666>;
-};
-
-&extalr_clk {
- clock-frequency = <32768>;
-};
-
-&gether {
- pinctrl-0 = <&gether_pins>;
- pinctrl-names = "default";
-
- phy-mode = "rgmii-id";
- phy-handle = <&phy0>;
- renesas,no-ether-link;
- status = "okay";
-
- phy0: ethernet-phy@0 {
- compatible = "ethernet-phy-id0022.1622",
- "ethernet-phy-ieee802.3-c22";
- rxc-skew-ps = <1500>;
- reg = <0>;
- interrupt-parent = <&gpio4>;
- interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
- reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
- };
-};
-
-&i2c0 {
- pinctrl-0 = <&i2c0_pins>;
- pinctrl-names = "default";
-
- status = "okay";
- clock-frequency = <400000>;
-
- io_expander0: gpio@20 {
- compatible = "onnn,pca9654";
- reg = <0x20>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- io_expander1: gpio@21 {
- compatible = "onnn,pca9654";
- reg = <0x21>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- hdmi@39 {
- compatible = "adi,adv7511w";
- reg = <0x39>;
- interrupt-parent = <&gpio1>;
- interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
- avdd-supply = <&d1_8v>;
- dvdd-supply = <&d1_8v>;
- pvdd-supply = <&d1_8v>;
- bgvdd-supply = <&d1_8v>;
- dvdd-3v-supply = <&d3_3v>;
-
- adi,input-depth = <8>;
- adi,input-colorspace = "rgb";
- adi,input-clock = "1x";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- adv7511_in: endpoint {
- remote-endpoint = <&thc63lvd1024_out>;
- };
- };
-
- port@1 {
- reg = <1>;
- adv7511_out: endpoint {
- remote-endpoint = <&hdmi_con>;
- };
- };
- };
- };
-};
-
-&i2c1 {
- pinctrl-0 = <&i2c1_pins>;
- pinctrl-names = "default";
-
- status = "okay";
- clock-frequency = <400000>;
-
- gmsl0: gmsl-deserializer@48 {
- compatible = "maxim,max9286";
- reg = <0x48>;
-
- maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>;
- enable-gpios = <&io_expander0 0 GPIO_ACTIVE_HIGH>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- };
-
- port@1 {
- reg = <1>;
- };
-
- port@2 {
- reg = <2>;
- };
-
- port@3 {
- reg = <3>;
- };
-
- port@4 {
- reg = <4>;
- max9286_out0: endpoint {
- clock-lanes = <0>;
- data-lanes = <1 2 3 4>;
- remote-endpoint = <&csi40_in>;
- };
- };
- };
-
- i2c-mux {
- #address-cells = <1>;
- #size-cells = <0>;
-
- i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- status = "disabled";
- };
-
- i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
-
- status = "disabled";
- };
-
- i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
-
- status = "disabled";
- };
-
- i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
-
- status = "disabled";
- };
- };
- };
-
- gmsl1: gmsl-deserializer@4a {
- compatible = "maxim,max9286";
- reg = <0x4a>;
-
- maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>;
- enable-gpios = <&io_expander1 0 GPIO_ACTIVE_HIGH>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- };
-
- port@1 {
- reg = <1>;
- };
-
- port@2 {
- reg = <2>;
- };
-
- port@3 {
- reg = <3>;
- };
-
- port@4 {
- reg = <4>;
- max9286_out1: endpoint {
- clock-lanes = <0>;
- data-lanes = <1 2 3 4>;
- remote-endpoint = <&csi41_in>;
- };
- };
- };
-
- i2c-mux {
- #address-cells = <1>;
- #size-cells = <0>;
-
- i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- status = "disabled";
- };
-
- i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
-
- status = "disabled";
- };
-
- i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
-
- status = "disabled";
- };
-
- i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
-
- status = "disabled";
- };
- };
- };
-};
-
-&lvds0 {
- status = "okay";
-
- ports {
- port@1 {
- lvds0_out: endpoint {
- remote-endpoint = <&thc63lvd1024_in>;
- };
- };
- };
-};
-
-&mmc0 {
- pinctrl-0 = <&mmc_pins>;
- pinctrl-1 = <&mmc_pins>;
- pinctrl-names = "default", "state_uhs";
-
- vmmc-supply = <&d3_3v>;
- vqmmc-supply = <&vddq_vin01>;
- mmc-hs200-1_8v;
- bus-width = <8>;
- no-sd;
- no-sdio;
- non-removable;
- status = "okay";
-};
-
-&pciec {
- status = "okay";
-};
-
-&pcie_bus_clk {
- clock-frequency = <100000000>;
-};
-
-&pcie_phy {
- status = "okay";
-};
-
-&pfc {
- canfd0_pins: canfd0 {
- groups = "canfd0_data_a";
- function = "canfd0";
- };
-
- gether_pins: gether {
- groups = "gether_mdio_a", "gether_rgmii",
- "gether_txcrefclk", "gether_txcrefclk_mega";
- function = "gether";
- };
-
- i2c0_pins: i2c0 {
- groups = "i2c0";
- function = "i2c0";
- };
-
- i2c1_pins: i2c1 {
- groups = "i2c1";
- function = "i2c1";
- };
-
- mmc_pins: mmc {
- groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
- function = "mmc";
- power-source = <1800>;
- };
-
- qspi0_pins: qspi0 {
- groups = "qspi0_ctrl", "qspi0_data4";
- function = "qspi0";
- };
-
- scif0_pins: scif0 {
- groups = "scif0_data";
- function = "scif0";
- };
-
- scif_clk_pins: scif_clk {
- groups = "scif_clk_b";
- function = "scif_clk";
- };
-};
-
-&rpc {
- pinctrl-0 = <&qspi0_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-
- flash@0 {
- compatible = "spansion,s25fs512s", "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <50000000>;
- spi-rx-bus-width = <4>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- bootparam@0 {
- reg = <0x00000000 0x040000>;
- read-only;
- };
- cr7@40000 {
- reg = <0x00040000 0x080000>;
- read-only;
- };
- cert_header_sa3@c0000 {
- reg = <0x000c0000 0x080000>;
- read-only;
- };
- bl2@140000 {
- reg = <0x00140000 0x040000>;
- read-only;
- };
- cert_header_sa6@180000 {
- reg = <0x00180000 0x040000>;
- read-only;
- };
- bl31@1c0000 {
- reg = <0x001c0000 0x460000>;
- read-only;
- };
- uboot@640000 {
- reg = <0x00640000 0x0c0000>;
- read-only;
- };
- uboot-env@700000 {
- reg = <0x00700000 0x040000>;
- read-only;
- };
- dtb@740000 {
- reg = <0x00740000 0x080000>;
- };
- kernel@7c0000 {
- reg = <0x007c0000 0x1400000>;
- };
- user@1bc0000 {
- reg = <0x01bc0000 0x2440000>;
- };
- };
- };
-};
-
-&rwdt {
- timeout-sec = <60>;
- status = "okay";
-};
-
-&scif0 {
- pinctrl-0 = <&scif0_pins>, <&scif_clk_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&scif_clk {
- clock-frequency = <14745600>;
};
projects / linux.git / commitdiff