ARM: dts: sun8i: r40: bananapi-m2-ultra: Fix dcdc1 regulator

DCDC1 regulator powers many different subsystems. While some of them can
work at 3.0 V, some of them can not. For example, VCC-HDMI can only work
between 3.24 V and 3.36 V. According to OS images provided by the board
manufacturer this regulator should be set to 3.3 V.

Set DCDC1 and DCDC1SW to 3.3 V in order to fix this.

Fixes: da7ac948fa93 ("ARM: dts: sun8i: Add board dts file for Banana Pi M2 Ultra")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200824193649.978197-1-jernej.skrabec@siol.net

diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
index 42d62d1ba1dc7d752282933767ecfef064421850..ea15073f0c79cef2ab234b6f274993727a7cbcd8 100644 (file)
--- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
+++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
@@ -223,16 +223,16 @@
 };
 
 &reg_dc1sw {
-       regulator-min-microvolt = <3000000>;
-       regulator-max-microvolt = <3000000>;
+       regulator-min-microvolt = <3300000>;
+       regulator-max-microvolt = <3300000>;
        regulator-name = "vcc-gmac-phy";
 };
 
 &reg_dcdc1 {
        regulator-always-on;
-       regulator-min-microvolt = <3000000>;
-       regulator-max-microvolt = <3000000>;
-       regulator-name = "vcc-3v0";
+       regulator-min-microvolt = <3300000>;
+       regulator-max-microvolt = <3300000>;
+       regulator-name = "vcc-3v3";
 };
 
 &reg_dcdc2 {