Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Event: l1_update; errno: 5; imm: off; once: off; write
-Failed to flush the L2 table cache: Input/output error
-Failed to flush the refcount block cache: Input/output error
+qemu-io: Failed to flush the L2 table cache: Input/output error
+qemu-io: Failed to flush the refcount block cache: Input/output error
write failed: Input/output error
1 leaked clusters were found on the image.
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Event: l1_update; errno: 5; imm: off; once: off; write -b
-Failed to flush the L2 table cache: Input/output error
-Failed to flush the refcount block cache: Input/output error
+qemu-io: Failed to flush the L2 table cache: Input/output error
+qemu-io: Failed to flush the refcount block cache: Input/output error
write failed: Input/output error
1 leaked clusters were found on the image.
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Event: l1_update; errno: 28; imm: off; once: off; write
-Failed to flush the L2 table cache: No space left on device
-Failed to flush the refcount block cache: No space left on device
+qemu-io: Failed to flush the L2 table cache: No space left on device
+qemu-io: Failed to flush the refcount block cache: No space left on device
write failed: No space left on device
1 leaked clusters were found on the image.
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Event: l1_update; errno: 28; imm: off; once: off; write -b
-Failed to flush the L2 table cache: No space left on device
-Failed to flush the refcount block cache: No space left on device
+qemu-io: Failed to flush the L2 table cache: No space left on device
+qemu-io: Failed to flush the refcount block cache: No space left on device
write failed: No space left on device
1 leaked clusters were found on the image.
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Event: l2_update; errno: 5; imm: off; once: off; write
-Failed to flush the L2 table cache: Input/output error
-Failed to flush the refcount block cache: Input/output error
+qemu-io: Failed to flush the L2 table cache: Input/output error
+qemu-io: Failed to flush the refcount block cache: Input/output error
write failed: Input/output error
127 leaked clusters were found on the image.
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Event: l2_update; errno: 5; imm: off; once: off; write -b
-Failed to flush the L2 table cache: Input/output error
-Failed to flush the refcount block cache: Input/output error
+qemu-io: Failed to flush the L2 table cache: Input/output error
+qemu-io: Failed to flush the refcount block cache: Input/output error
write failed: Input/output error
127 leaked clusters were found on the image.
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Event: l2_update; errno: 28; imm: off; once: off; write
-Failed to flush the L2 table cache: No space left on device
-Failed to flush the refcount block cache: No space left on device
+qemu-io: Failed to flush the L2 table cache: No space left on device
+qemu-io: Failed to flush the refcount block cache: No space left on device
write failed: No space left on device
127 leaked clusters were found on the image.
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Event: l2_update; errno: 28; imm: off; once: off; write -b
-Failed to flush the L2 table cache: No space left on device
-Failed to flush the refcount block cache: No space left on device
+qemu-io: Failed to flush the L2 table cache: No space left on device
+qemu-io: Failed to flush the refcount block cache: No space left on device
write failed: No space left on device
127 leaked clusters were found on the image.
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Event: l2_alloc_write; errno: 5; imm: off; once: off; write
-Failed to flush the L2 table cache: Input/output error
-Failed to flush the refcount block cache: Input/output error
+qemu-io: Failed to flush the L2 table cache: Input/output error
+qemu-io: Failed to flush the refcount block cache: Input/output error
write failed: Input/output error
No errors were found on the image.
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Event: l2_alloc_write; errno: 5; imm: off; once: off; write -b
-Failed to flush the L2 table cache: Input/output error
-Failed to flush the refcount block cache: Input/output error
+qemu-io: Failed to flush the L2 table cache: Input/output error
+qemu-io: Failed to flush the refcount block cache: Input/output error
write failed: Input/output error
1 leaked clusters were found on the image.
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Event: l2_alloc_write; errno: 28; imm: off; once: off; write
-Failed to flush the L2 table cache: No space left on device
-Failed to flush the refcount block cache: No space left on device
+qemu-io: Failed to flush the L2 table cache: No space left on device
+qemu-io: Failed to flush the refcount block cache: No space left on device
write failed: No space left on device
No errors were found on the image.
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Event: l2_alloc_write; errno: 28; imm: off; once: off; write -b
-Failed to flush the L2 table cache: No space left on device
-Failed to flush the refcount block cache: No space left on device
+qemu-io: Failed to flush the L2 table cache: No space left on device
+qemu-io: Failed to flush the refcount block cache: No space left on device
write failed: No space left on device
1 leaked clusters were found on the image.
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Event: write_aio; errno: 5; imm: off; once: off; write
-Failed to flush the L2 table cache: Input/output error
-Failed to flush the refcount block cache: Input/output error
+qemu-io: Failed to flush the L2 table cache: Input/output error
+qemu-io: Failed to flush the refcount block cache: Input/output error
write failed: Input/output error
No errors were found on the image.
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Event: write_aio; errno: 5; imm: off; once: off; write -b
-Failed to flush the L2 table cache: Input/output error
-Failed to flush the refcount block cache: Input/output error
+qemu-io: Failed to flush the L2 table cache: Input/output error
+qemu-io: Failed to flush the refcount block cache: Input/output error
write failed: Input/output error
No errors were found on the image.
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Event: write_aio; errno: 28; imm: off; once: off; write
-Failed to flush the L2 table cache: No space left on device
-Failed to flush the refcount block cache: No space left on device
+qemu-io: Failed to flush the L2 table cache: No space left on device
+qemu-io: Failed to flush the refcount block cache: No space left on device
write failed: No space left on device
No errors were found on the image.
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Event: write_aio; errno: 28; imm: off; once: off; write -b
-Failed to flush the L2 table cache: No space left on device
-Failed to flush the refcount block cache: No space left on device
+qemu-io: Failed to flush the L2 table cache: No space left on device
+qemu-io: Failed to flush the refcount block cache: No space left on device
write failed: No space left on device
No errors were found on the image.
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Event: refblock_load; errno: 5; imm: off; once: off; write
-Failed to flush the L2 table cache: Input/output error
-Failed to flush the refcount block cache: Input/output error
+qemu-io: Failed to flush the L2 table cache: Input/output error
+qemu-io: Failed to flush the refcount block cache: Input/output error
write failed: Input/output error
No errors were found on the image.
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Event: refblock_load; errno: 5; imm: off; once: off; write -b
-Failed to flush the L2 table cache: Input/output error
-Failed to flush the refcount block cache: Input/output error
+qemu-io: Failed to flush the L2 table cache: Input/output error
+qemu-io: Failed to flush the refcount block cache: Input/output error
write failed: Input/output error
No errors were found on the image.
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Event: refblock_load; errno: 28; imm: off; once: off; write
-Failed to flush the L2 table cache: No space left on device
-Failed to flush the refcount block cache: No space left on device
+qemu-io: Failed to flush the L2 table cache: No space left on device
+qemu-io: Failed to flush the refcount block cache: No space left on device
write failed: No space left on device
No errors were found on the image.
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Event: refblock_load; errno: 28; imm: off; once: off; write -b
-Failed to flush the L2 table cache: No space left on device
-Failed to flush the refcount block cache: No space left on device
+qemu-io: Failed to flush the L2 table cache: No space left on device
+qemu-io: Failed to flush the refcount block cache: No space left on device
write failed: No space left on device
No errors were found on the image.
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Event: refblock_update_part; errno: 5; imm: off; once: off; write
-Failed to flush the L2 table cache: Input/output error
-Failed to flush the refcount block cache: Input/output error
+qemu-io: Failed to flush the L2 table cache: Input/output error
+qemu-io: Failed to flush the refcount block cache: Input/output error
write failed: Input/output error
No errors were found on the image.
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Event: refblock_update_part; errno: 5; imm: off; once: off; write -b
-Failed to flush the L2 table cache: Input/output error
-Failed to flush the refcount block cache: Input/output error
+qemu-io: Failed to flush the L2 table cache: Input/output error
+qemu-io: Failed to flush the refcount block cache: Input/output error
write failed: Input/output error
No errors were found on the image.
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Event: refblock_update_part; errno: 28; imm: off; once: off; write
-Failed to flush the L2 table cache: No space left on device
-Failed to flush the refcount block cache: No space left on device
+qemu-io: Failed to flush the L2 table cache: No space left on device
+qemu-io: Failed to flush the refcount block cache: No space left on device
write failed: No space left on device
No errors were found on the image.
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Event: refblock_update_part; errno: 28; imm: off; once: off; write -b
-Failed to flush the L2 table cache: No space left on device
-Failed to flush the refcount block cache: No space left on device
+qemu-io: Failed to flush the L2 table cache: No space left on device
+qemu-io: Failed to flush the refcount block cache: No space left on device
write failed: No space left on device
No errors were found on the image.
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Event: refblock_alloc; errno: 5; imm: off; once: off; write
-Failed to flush the L2 table cache: Input/output error
-Failed to flush the refcount block cache: Input/output error
+qemu-io: Failed to flush the L2 table cache: Input/output error
+qemu-io: Failed to flush the refcount block cache: Input/output error
write failed: Input/output error
No errors were found on the image.
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Event: refblock_alloc; errno: 5; imm: off; once: off; write -b
-Failed to flush the L2 table cache: Input/output error
-Failed to flush the refcount block cache: Input/output error
+qemu-io: Failed to flush the L2 table cache: Input/output error
+qemu-io: Failed to flush the refcount block cache: Input/output error
write failed: Input/output error
No errors were found on the image.
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Event: refblock_alloc; errno: 28; imm: off; once: off; write
-Failed to flush the L2 table cache: No space left on device
-Failed to flush the refcount block cache: No space left on device
+qemu-io: Failed to flush the L2 table cache: No space left on device
+qemu-io: Failed to flush the refcount block cache: No space left on device
write failed: No space left on device
No errors were found on the image.
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Event: refblock_alloc; errno: 28; imm: off; once: off; write -b
-Failed to flush the L2 table cache: No space left on device
-Failed to flush the refcount block cache: No space left on device
+qemu-io: Failed to flush the L2 table cache: No space left on device
+qemu-io: Failed to flush the refcount block cache: No space left on device
write failed: No space left on device
No errors were found on the image.
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Event: refblock_alloc_hookup; errno: 28; imm: off; once: off; write
-Failed to flush the L2 table cache: No space left on device
-Failed to flush the refcount block cache: No space left on device
+qemu-io: Failed to flush the L2 table cache: No space left on device
+qemu-io: Failed to flush the refcount block cache: No space left on device
write failed: No space left on device
55 leaked clusters were found on the image.
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Event: refblock_alloc_hookup; errno: 28; imm: off; once: off; write -b
-Failed to flush the L2 table cache: No space left on device
-Failed to flush the refcount block cache: No space left on device
+qemu-io: Failed to flush the L2 table cache: No space left on device
+qemu-io: Failed to flush the refcount block cache: No space left on device
write failed: No space left on device
251 leaked clusters were found on the image.
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Event: refblock_alloc_write; errno: 28; imm: off; once: off; write
-Failed to flush the L2 table cache: No space left on device
-Failed to flush the refcount block cache: No space left on device
+qemu-io: Failed to flush the L2 table cache: No space left on device
+qemu-io: Failed to flush the refcount block cache: No space left on device
write failed: No space left on device
No errors were found on the image.
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Event: refblock_alloc_write; errno: 28; imm: off; once: off; write -b
-Failed to flush the L2 table cache: No space left on device
-Failed to flush the refcount block cache: No space left on device
+qemu-io: Failed to flush the L2 table cache: No space left on device
+qemu-io: Failed to flush the refcount block cache: No space left on device
write failed: No space left on device
No errors were found on the image.
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Event: refblock_alloc_write_blocks; errno: 28; imm: off; once: off; write
-Failed to flush the L2 table cache: No space left on device
-Failed to flush the refcount block cache: No space left on device
+qemu-io: Failed to flush the L2 table cache: No space left on device
+qemu-io: Failed to flush the refcount block cache: No space left on device
write failed: No space left on device
10 leaked clusters were found on the image.
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Event: refblock_alloc_write_blocks; errno: 28; imm: off; once: off; write -b
-Failed to flush the L2 table cache: No space left on device
-Failed to flush the refcount block cache: No space left on device
+qemu-io: Failed to flush the L2 table cache: No space left on device
+qemu-io: Failed to flush the refcount block cache: No space left on device
write failed: No space left on device
23 leaked clusters were found on the image.
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Event: refblock_alloc_write_table; errno: 28; imm: off; once: off; write
-Failed to flush the L2 table cache: No space left on device
-Failed to flush the refcount block cache: No space left on device
+qemu-io: Failed to flush the L2 table cache: No space left on device
+qemu-io: Failed to flush the refcount block cache: No space left on device
write failed: No space left on device
10 leaked clusters were found on the image.
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Event: refblock_alloc_write_table; errno: 28; imm: off; once: off; write -b
-Failed to flush the L2 table cache: No space left on device
-Failed to flush the refcount block cache: No space left on device
+qemu-io: Failed to flush the L2 table cache: No space left on device
+qemu-io: Failed to flush the refcount block cache: No space left on device
write failed: No space left on device
23 leaked clusters were found on the image.
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Event: refblock_alloc_switch_table; errno: 28; imm: off; once: off; write
-Failed to flush the L2 table cache: No space left on device
-Failed to flush the refcount block cache: No space left on device
+qemu-io: Failed to flush the L2 table cache: No space left on device
+qemu-io: Failed to flush the refcount block cache: No space left on device
write failed: No space left on device
10 leaked clusters were found on the image.
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Event: refblock_alloc_switch_table; errno: 28; imm: off; once: off; write -b
-Failed to flush the L2 table cache: No space left on device
-Failed to flush the refcount block cache: No space left on device
+qemu-io: Failed to flush the L2 table cache: No space left on device
+qemu-io: Failed to flush the refcount block cache: No space left on device
write failed: No space left on device
23 leaked clusters were found on the image.
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Event: l1_grow_write_table; errno: 5; imm: off; once: off
-Failed to flush the L2 table cache: Input/output error
-Failed to flush the refcount block cache: Input/output error
+qemu-io: Failed to flush the L2 table cache: Input/output error
+qemu-io: Failed to flush the refcount block cache: Input/output error
write failed: Input/output error
No errors were found on the image.
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Event: l1_grow_write_table; errno: 28; imm: off; once: off
-Failed to flush the L2 table cache: No space left on device
-Failed to flush the refcount block cache: No space left on device
+qemu-io: Failed to flush the L2 table cache: No space left on device
+qemu-io: Failed to flush the refcount block cache: No space left on device
write failed: No space left on device
No errors were found on the image.
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Event: l1_grow_activate_table; errno: 5; imm: off; once: off
-Failed to flush the L2 table cache: Input/output error
-Failed to flush the refcount block cache: Input/output error
+qemu-io: Failed to flush the L2 table cache: Input/output error
+qemu-io: Failed to flush the refcount block cache: Input/output error
write failed: Input/output error
96 leaked clusters were found on the image.
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
Event: l1_grow_activate_table; errno: 28; imm: off; once: off
-Failed to flush the L2 table cache: No space left on device
-Failed to flush the refcount block cache: No space left on device
+qemu-io: Failed to flush the L2 table cache: No space left on device
+qemu-io: Failed to flush the refcount block cache: No space left on device
write failed: No space left on device
96 leaked clusters were found on the image.
lazy refcounts: false
refcount bits: 16
corrupt: true
-can't open device TEST_DIR/t.IMGFMT: IMGFMT: Image is corrupt; cannot be opened read/write
+qemu-io: can't open device TEST_DIR/t.IMGFMT: IMGFMT: Image is corrupt; cannot be opened read/write
no file open, try 'help open'
read 512/512 bytes at offset 0
512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
=== Testing zero refcount table size ===
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
-can't open device TEST_DIR/t.IMGFMT: Image does not contain a reference count table
+qemu-io: can't open device TEST_DIR/t.IMGFMT: Image does not contain a reference count table
ERROR cluster 0 refcount=0 reference=1
ERROR cluster 3 refcount=0 reference=1
Rebuilding refcount structure
Can't get refcount for cluster 3: Input/output error
Rebuilding refcount structure
Repairing cluster 1 refcount=1 reference=0
-can't open device TEST_DIR/t.IMGFMT: Could not repair dirty image: Input/output error
+qemu-io: can't open device TEST_DIR/t.IMGFMT: Could not repair dirty image: Input/output error
--- Repairing ---
Leaked cluster 1 refcount=1 reference=0
Repairing cluster 1 refcount=1 reference=0
Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=131072
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=131072 backing_file=TEST_DIR/t.IMGFMT.base
-can't open device TEST_DIR/t.IMGFMT: Could not open backing file: Could not open 'TEST_DIR/t.IMGFMT.base': No such file or directory
+qemu-io: can't open device TEST_DIR/t.IMGFMT: Could not open backing file: Could not open 'TEST_DIR/t.IMGFMT.base': No such file or directory
*** done
QA output created by 070
=== Verify open image read-only fails, due to dirty log ===
-can't open device TEST_DIR/iotest-dirtylog-10G-4M.vhdx: VHDX image file 'TEST_DIR/iotest-dirtylog-10G-4M.vhdx' opened read-only, but contains a log that needs to be replayed
+qemu-io: can't open device TEST_DIR/iotest-dirtylog-10G-4M.vhdx: VHDX image file 'TEST_DIR/iotest-dirtylog-10G-4M.vhdx' opened read-only, but contains a log that needs to be replayed
To replay the log, run:
qemu-img check -r all 'TEST_DIR/iotest-dirtylog-10G-4M.vhdx'
=== Verify open image replays log ===
512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
== block_size must be a multiple of 512 ==
-can't open device TEST_DIR/simple-pattern.cloop: block_size 513 must be a multiple of 512
+qemu-io: can't open device TEST_DIR/simple-pattern.cloop: block_size 513 must be a multiple of 512
== block_size cannot be zero ==
-can't open device TEST_DIR/simple-pattern.cloop: block_size cannot be zero
+qemu-io: can't open device TEST_DIR/simple-pattern.cloop: block_size cannot be zero
== huge block_size ===
-can't open device TEST_DIR/simple-pattern.cloop: block_size 4294966784 must be 64 MB or less
+qemu-io: can't open device TEST_DIR/simple-pattern.cloop: block_size 4294966784 must be 64 MB or less
== offsets_size overflow ===
-can't open device TEST_DIR/simple-pattern.cloop: n_blocks 4294967295 must be 536870911 or less
+qemu-io: can't open device TEST_DIR/simple-pattern.cloop: n_blocks 4294967295 must be 536870911 or less
== refuse images that require too many offsets ===
-can't open device TEST_DIR/simple-pattern.cloop: image requires too many offsets, try increasing block size
+qemu-io: can't open device TEST_DIR/simple-pattern.cloop: image requires too many offsets, try increasing block size
== refuse images with non-monotonically increasing offsets ==
-can't open device TEST_DIR/simple-pattern.cloop: offsets not monotonically increasing at index 1, image file is corrupt
+qemu-io: can't open device TEST_DIR/simple-pattern.cloop: offsets not monotonically increasing at index 1, image file is corrupt
== refuse images with invalid compressed block size ==
-can't open device TEST_DIR/simple-pattern.cloop: invalid compressed block size at index 1, image file is corrupt
+qemu-io: can't open device TEST_DIR/simple-pattern.cloop: invalid compressed block size at index 1, image file is corrupt
*** done
64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
== Negative catalog size ==
-can't open device TEST_DIR/parallels-v1: Catalog too large
+qemu-io: can't open device TEST_DIR/parallels-v1: Catalog too large
== Overflow in catalog allocation ==
-can't open device TEST_DIR/parallels-v1: Catalog too large
+qemu-io: can't open device TEST_DIR/parallels-v1: Catalog too large
== Zero sectors per track ==
-can't open device TEST_DIR/parallels-v1: Invalid image: Zero sectors per track
+qemu-io: can't open device TEST_DIR/parallels-v1: Invalid image: Zero sectors per track
== Read from a valid v2 image ==
read 65536/65536 bytes at offset 0
512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
== Negative catalog size ==
-can't open device TEST_DIR/empty.bochs: Catalog size is too large
+qemu-io: can't open device TEST_DIR/empty.bochs: Catalog size is too large
== Overflow for catalog size * sizeof(uint32_t) ==
-can't open device TEST_DIR/empty.bochs: Catalog size is too large
+qemu-io: can't open device TEST_DIR/empty.bochs: Catalog size is too large
== Too small catalog bitmap for image size ==
-can't open device TEST_DIR/empty.bochs: Catalog size is too small for this disk size
-can't open device TEST_DIR/empty.bochs: Catalog size is too small for this disk size
+qemu-io: can't open device TEST_DIR/empty.bochs: Catalog size is too small for this disk size
+qemu-io: can't open device TEST_DIR/empty.bochs: Catalog size is too small for this disk size
== Negative extent size ==
-can't open device TEST_DIR/empty.bochs: Extent size 2147483648 is too large
+qemu-io: can't open device TEST_DIR/empty.bochs: Extent size 2147483648 is too large
== Zero extent size ==
-can't open device TEST_DIR/empty.bochs: Extent size must be at least 512
+qemu-io: can't open device TEST_DIR/empty.bochs: Extent size must be at least 512
*** done
== Huge header size ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
-can't open device TEST_DIR/t.qcow2: qcow2 header exceeds cluster size
-can't open device TEST_DIR/t.qcow2: qcow2 header exceeds cluster size
+qemu-io: can't open device TEST_DIR/t.qcow2: qcow2 header exceeds cluster size
+qemu-io: can't open device TEST_DIR/t.qcow2: qcow2 header exceeds cluster size
== Huge unknown header extension ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
-can't open device TEST_DIR/t.qcow2: Invalid backing file offset
-can't open device TEST_DIR/t.qcow2: Header extension too large
-can't open device TEST_DIR/t.qcow2: Header extension too large
+qemu-io: can't open device TEST_DIR/t.qcow2: Invalid backing file offset
+qemu-io: can't open device TEST_DIR/t.qcow2: Header extension too large
+qemu-io: can't open device TEST_DIR/t.qcow2: Header extension too large
== Huge refcount table size ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
-can't open device TEST_DIR/t.qcow2: Reference count table too large
-can't open device TEST_DIR/t.qcow2: Reference count table too large
+qemu-io: can't open device TEST_DIR/t.qcow2: Reference count table too large
+qemu-io: can't open device TEST_DIR/t.qcow2: Reference count table too large
== Misaligned refcount table ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
-can't open device TEST_DIR/t.qcow2: Reference count table offset invalid
+qemu-io: can't open device TEST_DIR/t.qcow2: Reference count table offset invalid
== Huge refcount offset ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
-can't open device TEST_DIR/t.qcow2: Reference count table offset invalid
+qemu-io: can't open device TEST_DIR/t.qcow2: Reference count table offset invalid
== Invalid snapshot table ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
-can't open device TEST_DIR/t.qcow2: Snapshot table too large
-can't open device TEST_DIR/t.qcow2: Snapshot table too large
-can't open device TEST_DIR/t.qcow2: Snapshot table offset invalid
-can't open device TEST_DIR/t.qcow2: Snapshot table offset invalid
+qemu-io: can't open device TEST_DIR/t.qcow2: Snapshot table too large
+qemu-io: can't open device TEST_DIR/t.qcow2: Snapshot table too large
+qemu-io: can't open device TEST_DIR/t.qcow2: Snapshot table offset invalid
+qemu-io: can't open device TEST_DIR/t.qcow2: Snapshot table offset invalid
== Hitting snapshot table size limit ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
== Invalid L1 table ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
-can't open device TEST_DIR/t.qcow2: Active L1 table too large
-can't open device TEST_DIR/t.qcow2: Active L1 table too large
-can't open device TEST_DIR/t.qcow2: Active L1 table offset invalid
-can't open device TEST_DIR/t.qcow2: Active L1 table offset invalid
+qemu-io: can't open device TEST_DIR/t.qcow2: Active L1 table too large
+qemu-io: can't open device TEST_DIR/t.qcow2: Active L1 table too large
+qemu-io: can't open device TEST_DIR/t.qcow2: Active L1 table offset invalid
+qemu-io: can't open device TEST_DIR/t.qcow2: Active L1 table offset invalid
== Invalid L1 table (with internal snapshot in the image) ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
== Invalid backing file size ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
-can't open device TEST_DIR/t.qcow2: Backing file name too long
+qemu-io: can't open device TEST_DIR/t.qcow2: Backing file name too long
== Invalid L2 entry (huge physical offset) ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
qemu-img: Failed to load snapshot: Snapshot L1 table offset invalid
qemu-img: Snapshot L1 table offset invalid
qemu-img: Failed to turn zero into data clusters: Invalid argument
-Failed to flush the refcount block cache: Invalid argument
+qemu-io: Failed to flush the refcount block cache: Invalid argument
write failed: Invalid argument
qemu-img: Snapshot L1 table offset invalid
qemu-img: Could not apply snapshot 'test': Failed to load snapshot: Invalid argument
qemu-img: Failed to load snapshot: Snapshot L1 table too large
qemu-img: Snapshot L1 table too large
qemu-img: Failed to turn zero into data clusters: File too large
-Failed to flush the refcount block cache: File too large
+qemu-io: Failed to flush the refcount block cache: File too large
write failed: File too large
qemu-img: Snapshot L1 table too large
qemu-img: Could not apply snapshot 'test': Failed to load snapshot: File too large
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
== checking the blkverify mode with invalid settings ==
-can't open: blkverify=on can only be set if there are exactly two files and vote-threshold is 2
+qemu-io: can't open: blkverify=on can only be set if there are exactly two files and vote-threshold is 2
== dynamically adding a child to a quorum ==
Testing:
== Invalid block size ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
-can't open device TEST_DIR/t.vpc: Invalid block size 0
-can't open device TEST_DIR/t.vpc: Invalid block size 0
-can't open device TEST_DIR/t.vpc: Invalid block size 128
-can't open device TEST_DIR/t.vpc: Invalid block size 128
-can't open device TEST_DIR/t.vpc: Invalid block size 305419896
-can't open device TEST_DIR/t.vpc: Invalid block size 305419896
+qemu-io: can't open device TEST_DIR/t.vpc: Invalid block size 0
+qemu-io: can't open device TEST_DIR/t.vpc: Invalid block size 0
+qemu-io: can't open device TEST_DIR/t.vpc: Invalid block size 128
+qemu-io: can't open device TEST_DIR/t.vpc: Invalid block size 128
+qemu-io: can't open device TEST_DIR/t.vpc: Invalid block size 305419896
+qemu-io: can't open device TEST_DIR/t.vpc: Invalid block size 305419896
*** done
=== Testing invalid option combinations ===
-can't open device TEST_DIR/t.IMGFMT: cache-size, l2-cache-size and refcount-cache-size may not be set at the same time
-can't open device TEST_DIR/t.IMGFMT: l2-cache-size may not exceed cache-size
-can't open device TEST_DIR/t.IMGFMT: refcount-cache-size may not exceed cache-size
-can't open device TEST_DIR/t.IMGFMT: cache-size, l2-cache-size and refcount-cache-size may not be set at the same time
-can't open device TEST_DIR/t.IMGFMT: L2 cache entry size must be a power of two between 512 and the cluster size (65536)
-can't open device TEST_DIR/t.IMGFMT: L2 cache entry size must be a power of two between 512 and the cluster size (65536)
-can't open device TEST_DIR/t.IMGFMT: L2 cache entry size must be a power of two between 512 and the cluster size (65536)
+qemu-io: can't open device TEST_DIR/t.IMGFMT: cache-size, l2-cache-size and refcount-cache-size may not be set at the same time
+qemu-io: can't open device TEST_DIR/t.IMGFMT: l2-cache-size may not exceed cache-size
+qemu-io: can't open device TEST_DIR/t.IMGFMT: refcount-cache-size may not exceed cache-size
+qemu-io: can't open device TEST_DIR/t.IMGFMT: cache-size, l2-cache-size and refcount-cache-size may not be set at the same time
+qemu-io: can't open device TEST_DIR/t.IMGFMT: L2 cache entry size must be a power of two between 512 and the cluster size (65536)
+qemu-io: can't open device TEST_DIR/t.IMGFMT: L2 cache entry size must be a power of two between 512 and the cluster size (65536)
+qemu-io: can't open device TEST_DIR/t.IMGFMT: L2 cache entry size must be a power of two between 512 and the cluster size (65536)
=== Testing valid option combinations ===
cluster_size: 65536
backing file: TEST_DIR/t.IMGFMT.base
backing file format: foo
-can't open device TEST_DIR/t.qcow2: Could not open backing file: Unknown driver 'foo'
+qemu-io: can't open device TEST_DIR/t.qcow2: Could not open backing file: Unknown driver 'foo'
no file open, try 'help open'
read 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
== truncated header cluster ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
-can't open device TEST_DIR/t.qed: Could not open 'TEST_DIR/t.qed': Invalid argument
+qemu-io: can't open device TEST_DIR/t.qed: Could not open 'TEST_DIR/t.qed': Invalid argument
== invalid header magic ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
-can't open device TEST_DIR/t.qed: Image not in QED format
+qemu-io: can't open device TEST_DIR/t.qed: Image not in QED format
== invalid cluster size ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
-can't open device TEST_DIR/t.qed: Could not open 'TEST_DIR/t.qed': Invalid argument
+qemu-io: can't open device TEST_DIR/t.qed: Could not open 'TEST_DIR/t.qed': Invalid argument
== invalid table size ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
-can't open device TEST_DIR/t.qed: Could not open 'TEST_DIR/t.qed': Invalid argument
+qemu-io: can't open device TEST_DIR/t.qed: Could not open 'TEST_DIR/t.qed': Invalid argument
== invalid header size ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
-can't open device TEST_DIR/t.qed: Could not open 'TEST_DIR/t.qed': Invalid argument
+qemu-io: can't open device TEST_DIR/t.qed: Could not open 'TEST_DIR/t.qed': Invalid argument
== invalid L1 table offset ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
-can't open device TEST_DIR/t.qed: Could not open 'TEST_DIR/t.qed': Invalid argument
+qemu-io: can't open device TEST_DIR/t.qed: Could not open 'TEST_DIR/t.qed': Invalid argument
== invalid image size ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
-can't open device TEST_DIR/t.qed: Could not open 'TEST_DIR/t.qed': Invalid argument
+qemu-io: can't open device TEST_DIR/t.qed: Could not open 'TEST_DIR/t.qed': Invalid argument
*** done
read 32768/32768 bytes at offset 0
32 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
== Corrupt image ==
-can't open device TEST_DIR/t.parallels: parallels: Image was not closed correctly; cannot be opened read/write
+qemu-io: can't open device TEST_DIR/t.parallels: parallels: Image was not closed correctly; cannot be opened read/write
ERROR image was not closed correctly
1 errors were found on the image.
=== Check that node-name can't be changed ===
-Cannot change the option 'node-name'
-Cannot change the option 'node-name'
-Cannot change the option 'node-name'
+qemu-io: Cannot change the option 'node-name'
+qemu-io: Cannot change the option 'node-name'
+qemu-io: Cannot change the option 'node-name'
=== Check that unchanged node-name is okay ===
=== Check that driver can't be changed ===
-Cannot change the option 'driver'
-Cannot change the option 'driver'
-Cannot change the option 'driver'
+qemu-io: Cannot change the option 'driver'
+qemu-io: Cannot change the option 'driver'
+qemu-io: Cannot change the option 'driver'
=== Check that unchanged driver is okay ===
=== Check that mixing -c/-r/-w and their corresponding options is forbidden ===
-Cannot set both -r/-w and 'read-only'
-Cannot set both -r/-w and 'read-only'
-Cannot set both -c and the cache options
-Cannot set both -c and the cache options
-Cannot set both -c and the cache options
+qemu-io: Cannot set both -r/-w and 'read-only'
+qemu-io: Cannot set both -r/-w and 'read-only'
+qemu-io: Cannot set both -c and the cache options
+qemu-io: Cannot set both -c and the cache options
+qemu-io: Cannot set both -c and the cache options
=== Check that invalid options are handled correctly ===
-Parameter 'read-only' expects 'on' or 'off'
-Parameter 'cache.no-flush' expects 'on' or 'off'
-Parameter 'cache.direct' expects 'on' or 'off'
-Parameter 'auto-read-only' expects 'on' or 'off'
+qemu-io: Parameter 'read-only' expects 'on' or 'off'
+qemu-io: Parameter 'cache.no-flush' expects 'on' or 'off'
+qemu-io: Parameter 'cache.direct' expects 'on' or 'off'
+qemu-io: Parameter 'auto-read-only' expects 'on' or 'off'
*** done
=== Try setting some invalid values ===
-Parameter 'lazy-refcounts' expects 'on' or 'off'
-cache-size, l2-cache-size and refcount-cache-size may not be set at the same time
-l2-cache-size may not exceed cache-size
-refcount-cache-size may not exceed cache-size
-L2 cache entry size must be a power of two between 512 and the cluster size (65536)
-L2 cache entry size must be a power of two between 512 and the cluster size (65536)
-Refcount cache size too big
-Conflicting values for qcow2 options 'overlap-check' ('constant') and 'overlap-check.template' ('all')
-Unsupported value 'blubb' for qcow2 option 'overlap-check'. Allowed are any of the following: none, constant, cached, all
-Unsupported value 'blubb' for qcow2 option 'overlap-check'. Allowed are any of the following: none, constant, cached, all
-Cache clean interval too big
+qemu-io: Parameter 'lazy-refcounts' expects 'on' or 'off'
+qemu-io: cache-size, l2-cache-size and refcount-cache-size may not be set at the same time
+qemu-io: l2-cache-size may not exceed cache-size
+qemu-io: refcount-cache-size may not exceed cache-size
+qemu-io: L2 cache entry size must be a power of two between 512 and the cluster size (65536)
+qemu-io: L2 cache entry size must be a power of two between 512 and the cluster size (65536)
+qemu-io: Refcount cache size too big
+qemu-io: Conflicting values for qcow2 options 'overlap-check' ('constant') and 'overlap-check.template' ('all')
+qemu-io: Unsupported value 'blubb' for qcow2 option 'overlap-check'. Allowed are any of the following: none, constant, cached, all
+qemu-io: Unsupported value 'blubb' for qcow2 option 'overlap-check'. Allowed are any of the following: none, constant, cached, all
+qemu-io: Cache clean interval too big
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=36028797018963968
-L2 cache size too big
+qemu-io: L2 cache size too big
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
=== Test transaction semantics ===
-Unsupported value 'blubb' for qcow2 option 'overlap-check'. Allowed are any of the following: none, constant, cached, all
+qemu-io: Unsupported value 'blubb' for qcow2 option 'overlap-check'. Allowed are any of the following: none, constant, cached, all
wrote 512/512 bytes at offset 0
512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
./common.rc: Killed ( if [ "${VALGRIND_QEMU}" == "y" ]; then
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
wrote 65536/65536 bytes at offset 0
64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-Parameter 'lazy-refcounts' expects 'on' or 'off'
+qemu-io: Parameter 'lazy-refcounts' expects 'on' or 'off'
qcow2: Marking image as corrupt: Preventing invalid write on metadata (overlaps with qcow2_header); further corruption events will be suppressed
write failed: Input/output error
*** done
read 65536/65536 bytes at offset 0
64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
{"return": {}}
-can't open device nbd+unix:///drv?socket=TEST_DIR/nbd: Requested export not available
+qemu-io: can't open device nbd+unix:///drv?socket=TEST_DIR/nbd: Requested export not available
server reported: export 'drv' not present
{"return": {}}
{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "SHUTDOWN", "data": {"guest": false, "reason": "host-qmp-quit"}}
QA output created by 143
{"return": {}}
{"return": {}}
-can't open device nbd+unix:///no_such_export?socket=TEST_DIR/nbd: Requested export not available
+qemu-io: can't open device nbd+unix:///no_such_export?socket=TEST_DIR/nbd: Requested export not available
server reported: export 'no_such_export' not present
{"return": {}}
{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "SHUTDOWN", "data": {"guest": false, "reason": "host-qmp-quit"}}
== Running utility commands ==
_qemu_io_wrapper -c read 0 512 TEST_DIR/t.qcow2
-can't open device TEST_DIR/t.qcow2: Failed to get "write" lock
+qemu-io: can't open device TEST_DIR/t.qcow2: Failed to get "write" lock
Is another process using the image [TEST_DIR/t.qcow2]?
_qemu_io_wrapper -r -c read 0 512 TEST_DIR/t.qcow2
-can't open device TEST_DIR/t.qcow2: Failed to get shared "write" lock
+qemu-io: can't open device TEST_DIR/t.qcow2: Failed to get shared "write" lock
Is another process using the image [TEST_DIR/t.qcow2]?
_qemu_io_wrapper -c open TEST_DIR/t.qcow2 -c read 0 512
-can't open device TEST_DIR/t.qcow2: Failed to get "write" lock
+qemu-io: can't open device TEST_DIR/t.qcow2: Failed to get "write" lock
Is another process using the image [TEST_DIR/t.qcow2]?
no file open, try 'help open'
_qemu_io_wrapper -c open -r TEST_DIR/t.qcow2 -c read 0 512
-can't open device TEST_DIR/t.qcow2: Failed to get shared "write" lock
+qemu-io: can't open device TEST_DIR/t.qcow2: Failed to get shared "write" lock
Is another process using the image [TEST_DIR/t.qcow2]?
no file open, try 'help open'
== Running utility commands -U ==
_qemu_io_wrapper -U -c read 0 512 TEST_DIR/t.qcow2
-can't open device TEST_DIR/t.qcow2: force-share=on can only be used with read-only images
+qemu-io: can't open device TEST_DIR/t.qcow2: force-share=on can only be used with read-only images
_qemu_io_wrapper -U -r -c read 0 512 TEST_DIR/t.qcow2
_qemu_io_wrapper -c open -U TEST_DIR/t.qcow2 -c read 0 512
-can't open device TEST_DIR/t.qcow2: force-share=on can only be used with read-only images
+qemu-io: can't open device TEST_DIR/t.qcow2: force-share=on can only be used with read-only images
no file open, try 'help open'
_qemu_io_wrapper -c open -r -U TEST_DIR/t.qcow2 -c read 0 512
== Running utility commands ==
_qemu_io_wrapper -c read 0 512 TEST_DIR/t.qcow2
-can't open device TEST_DIR/t.qcow2: Failed to get "write" lock
+qemu-io: can't open device TEST_DIR/t.qcow2: Failed to get "write" lock
Is another process using the image [TEST_DIR/t.qcow2]?
_qemu_io_wrapper -r -c read 0 512 TEST_DIR/t.qcow2
_qemu_io_wrapper -c open TEST_DIR/t.qcow2 -c read 0 512
-can't open device TEST_DIR/t.qcow2: Failed to get "write" lock
+qemu-io: can't open device TEST_DIR/t.qcow2: Failed to get "write" lock
Is another process using the image [TEST_DIR/t.qcow2]?
no file open, try 'help open'
== Running utility commands -U ==
_qemu_io_wrapper -U -c read 0 512 TEST_DIR/t.qcow2
-can't open device TEST_DIR/t.qcow2: force-share=on can only be used with read-only images
+qemu-io: can't open device TEST_DIR/t.qcow2: force-share=on can only be used with read-only images
_qemu_io_wrapper -U -r -c read 0 512 TEST_DIR/t.qcow2
_qemu_io_wrapper -c open -U TEST_DIR/t.qcow2 -c read 0 512
-can't open device TEST_DIR/t.qcow2: force-share=on can only be used with read-only images
+qemu-io: can't open device TEST_DIR/t.qcow2: force-share=on can only be used with read-only images
no file open, try 'help open'
_qemu_io_wrapper -c open -r -U TEST_DIR/t.qcow2 -c read 0 512
== Running utility commands -U ==
_qemu_io_wrapper -U -c read 0 512 TEST_DIR/t.qcow2
-can't open device TEST_DIR/t.qcow2: force-share=on can only be used with read-only images
+qemu-io: can't open device TEST_DIR/t.qcow2: force-share=on can only be used with read-only images
_qemu_io_wrapper -U -r -c read 0 512 TEST_DIR/t.qcow2
_qemu_io_wrapper -c open -U TEST_DIR/t.qcow2 -c read 0 512
-can't open device TEST_DIR/t.qcow2: force-share=on can only be used with read-only images
+qemu-io: can't open device TEST_DIR/t.qcow2: force-share=on can only be used with read-only images
no file open, try 'help open'
_qemu_io_wrapper -c open -r -U TEST_DIR/t.qcow2 -c read 0 512
{"return": "OKrn"}
_qemu_io_wrapper TEST_DIR/t.qcow2 -c write 0 512
-can't open device TEST_DIR/t.qcow2: Failed to get "write" lock
+qemu-io: can't open device TEST_DIR/t.qcow2: Failed to get "write" lock
Is another process using the image [TEST_DIR/t.qcow2]?
Creating overlay with qemu-img when the guest is running should be allowed
{"return": ""}
_qemu_io_wrapper TEST_DIR/t.qcow2 -c write 0 512
-can't open device TEST_DIR/t.qcow2: Failed to get "write" lock
+qemu-io: can't open device TEST_DIR/t.qcow2: Failed to get "write" lock
Is another process using the image [TEST_DIR/t.qcow2]?
Closing the other
{"return": ""}
No conflict:
Conflict:
--U conflicts with image options
+qemu-io: -U conflicts with image options
*** done
Start from read-only
-Block node is read-only
+qemu-io: Block node is read-only
wrote 65536/65536 bytes at offset 0
64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-Block node is read-only
+qemu-io: Block node is read-only
Start from read-write
wrote 65536/65536 bytes at offset 0
64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-Block node is read-only
+qemu-io: Block node is read-only
wrote 65536/65536 bytes at offset 0
64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
*** done
16 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
== verify open failure with wrong password ==
-can't open: Invalid password, cannot unlock any keyslot
+qemu-io: can't open: Invalid password, cannot unlock any keyslot
*** done
2 GiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
read 1024/1024 bytes at offset 3221226496
1 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-can't open device TEST_DIR/t.wrap.qcow2: Can't use copy-on-read on read-only device
+qemu-io: can't open device TEST_DIR/t.wrap.qcow2: Can't use copy-on-read on read-only device
2 GiB (0x80010000) bytes allocated at offset 0 bytes (0x0)
1023.938 MiB (0x3fff0000) bytes not allocated at offset 2 GiB (0x80010000)
64 KiB (0x10000) bytes allocated at offset 3 GiB (0xc0000000)
def assertConnectFailed(self, qemu_io_output):
self.assertEqual(filter_qemu_io(qemu_io_output).strip(),
- "can't open device " + nbd_uri +
+ "qemu-io: can't open device " + nbd_uri +
": Requested export not available\n"
"server reported: export 'exp' not present")
2 GiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
read 1024/1024 bytes at offset 3221226496
1 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-can't open device TEST_DIR/t.wrap.qcow2: Block node is read-only
+qemu-io: can't open device TEST_DIR/t.wrap.qcow2: Block node is read-only
2 GiB (0x80010000) bytes allocated at offset 0 bytes (0x0)
1023.938 MiB (0x3fff0000) bytes not allocated at offset 2 GiB (0x80010000)
64 KiB (0x10000) bytes allocated at offset 3 GiB (0xc0000000)
=== Testing with driver:file ===
== Testing RO ==
-can't open: A regular file was expected by the 'file' driver, but something else was given
-warning: Opening a character device as a file using the 'file' driver is deprecated
+qemu-io: can't open: A regular file was expected by the 'file' driver, but something else was given
+qemu-io: warning: Opening a character device as a file using the 'file' driver is deprecated
== Testing RW ==
-can't open: Could not open 'TEST_DIR/t.IMGFMT': Is a directory
-warning: Opening a character device as a file using the 'file' driver is deprecated
+qemu-io: can't open: Could not open 'TEST_DIR/t.IMGFMT': Is a directory
+qemu-io: warning: Opening a character device as a file using the 'file' driver is deprecated
=== Testing with driver:host_device ===
== Testing RO ==
-can't open: 'host_device' driver expects either a character or block device
+qemu-io: can't open: 'host_device' driver expects either a character or block device
== Testing RW ==
-can't open: Could not open 'TEST_DIR/t.IMGFMT': Is a directory
+qemu-io: can't open: Could not open 'TEST_DIR/t.IMGFMT': Is a directory
=== Testing with driver:host_cdrom ===
== Testing RO ==
-can't open: 'host_cdrom' driver expects either a character or block device
+qemu-io: can't open: 'host_cdrom' driver expects either a character or block device
== Testing RW ==
-can't open: Could not open 'TEST_DIR/t.IMGFMT': Is a directory
+qemu-io: can't open: Could not open 'TEST_DIR/t.IMGFMT': Is a directory
*** done
64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
read 65536/65536 bytes at offset 0
64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-can't open device TEST_DIR/t.qcow2: Could not open 'inexistent': No such file or directory
+qemu-io: can't open device TEST_DIR/t.qcow2: Could not open 'inexistent': No such file or directory
no file open, try 'help open'
Data file required, but without data file name in the image:
-can't open device TEST_DIR/t.qcow2: 'data-file' is required for this image
+qemu-io: can't open device TEST_DIR/t.qcow2: 'data-file' is required for this image
no file open, try 'help open'
read 65536/65536 bytes at offset 0
64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-can't open device TEST_DIR/t.qcow2: Could not open 'inexistent': No such file or directory
+qemu-io: can't open device TEST_DIR/t.qcow2: Could not open 'inexistent': No such file or directory
no file open, try 'help open'
Setting data-file for an image with internal data:
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
-can't open device TEST_DIR/t.qcow2: 'data-file' can only be set for images with an external data file
+qemu-io: can't open device TEST_DIR/t.qcow2: 'data-file' can only be set for images with an external data file
no file open, try 'help open'
-can't open device TEST_DIR/t.qcow2: Could not open 'inexistent': No such file or directory
+qemu-io: can't open device TEST_DIR/t.qcow2: Could not open 'inexistent': No such file or directory
no file open, try 'help open'
=== Conflicting features ===
projects / qemu.git / commitdiff