tty: serial: qcom_geni_serial: Use u32 for register variables

Use u32 rather than unsigned long for register variables for clarity and
consistency.

Signed-off-by: Ryan Case <ryandcase@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 6774da6435fa6bddbfd187d1f6e96b6715fe9904..b650a3a0ab7da2eababf7fe1dd510a86ae34658f 100644 (file)
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -758,12 +758,12 @@ out_write_wakeup:
 
 static irqreturn_t qcom_geni_serial_isr(int isr, void *dev)
 {
-       unsigned int m_irq_status;
-       unsigned int s_irq_status;
-       unsigned int geni_status;
+       u32 m_irq_en;
+       u32 m_irq_status;
+       u32 s_irq_status;
+       u32 geni_status;
        struct uart_port *uport = dev;
        unsigned long flags;
-       unsigned int m_irq_en;
        bool drop_rx = false;
        struct tty_port *tport = &uport->state->port;
        struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
@@ -842,7 +842,7 @@ static void qcom_geni_serial_shutdown(struct uart_port *uport)
 static int qcom_geni_serial_port_setup(struct uart_port *uport)
 {
        struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
-       unsigned int rxstale = DEFAULT_BITS_PER_CHAR * STALE_TIMEOUT;
+       u32 rxstale = DEFAULT_BITS_PER_CHAR * STALE_TIMEOUT;
        u32 proto;
 
        if (uart_console(uport)) {
@@ -941,14 +941,14 @@ static void qcom_geni_serial_set_termios(struct uart_port *uport,
                                struct ktermios *termios, struct ktermios *old)
 {
        unsigned int baud;
-       unsigned int bits_per_char;
-       unsigned int tx_trans_cfg;
-       unsigned int tx_parity_cfg;
-       unsigned int rx_trans_cfg;
-       unsigned int rx_parity_cfg;
-       unsigned int stop_bit_len;
+       u32 bits_per_char;
+       u32 tx_trans_cfg;
+       u32 tx_parity_cfg;
+       u32 rx_trans_cfg;
+       u32 rx_parity_cfg;
+       u32 stop_bit_len;
        unsigned int clk_div;
-       unsigned long ser_clk_cfg;
+       u32 ser_clk_cfg;
        struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
        unsigned long clk_rate;