usb: dwc2: add amcc,dwc-otg support

This patch adds support for the "amcc,usb-otg" device
which is found in the PowerPC Canyonlands' dts.

The device definition was added by:

commit c89b3458d8cc ("powerpc/44x: Add USB DWC DTS entry to Canyonlands
board")

but without any driver support as the dwc2 driver wasn't available at
that time.

Note: The system can't use the generic "snps,dwc2" compatible
because of the special ahbcfg configuration. The default
GAHBCFG_HBSTLEN_INCR4 of snps,dwc2 can cause a system hang
when the USB and SATA is used concurrently.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt
index ad8f7ff173eaf626ec8757f6c83c9a7b1d5f35e6..6c7c2bce6d0c3c2b59c8726da4a40a9a1a4a345d 100644 (file)
--- a/Documentation/devicetree/bindings/usb/dwc2.txt
+++ b/Documentation/devicetree/bindings/usb/dwc2.txt
@@ -12,6 +12,7 @@ Required properties:
   - "lantiq,xrx200-usb": The DWC2 USB controller instance in Lantiq XRX SoCs;
   - "amlogic,meson8b-usb": The DWC2 USB controller instance in Amlogic Meson8b SoCs;
   - "amlogic,meson-gxbb-usb": The DWC2 USB controller instance in Amlogic S905 SoCs;
+  - "amcc,dwc-otg": The DWC2 USB controller instance in AMCC Canyonlands 460EX SoCs;
   - snps,dwc2: A generic DWC2 USB controller with default parameters.
 - reg : Should contain 1 register range (address and length)
 - interrupts : Should contain 1 interrupt

diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c
index 513556a59f3854a7e8af1daf27cc63cc3b508e2f..a786256535b6a77392018aa93f78f785daf8a1b2 100644 (file)
--- a/drivers/usb/dwc2/params.c
+++ b/drivers/usb/dwc2/params.c
@@ -239,6 +239,7 @@ const struct of_device_id dwc2_of_match_table[] = {
        { .compatible = "samsung,s3c6400-hsotg", .data = NULL},
        { .compatible = "amlogic,meson8b-usb", .data = &params_amlogic },
        { .compatible = "amlogic,meson-gxbb-usb", .data = &params_amlogic },
+       { .compatible = "amcc,dwc-otg", .data = NULL },
        {},
 };
 MODULE_DEVICE_TABLE(of, dwc2_of_match_table);