arm64: dts: qcom: apq8016-sbc: Add CCI/Sensor nodes

Add cci device to msm8916.dtsi.
Add default 96boards camera node for db410c (apq8016-sbc).

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200324155843.10719-3-robert.foss@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 06aab44d798cdbdb8c686722b983fac1292cde59..14982762088d97643d4914bc103f9340b88474e3 100644 (file)
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -51,6 +51,30 @@
                stdout-path = "serial0";
        };
 
+       camera_vdddo_1v8: camera_vdddo_1v8 {
+               compatible = "regulator-fixed";
+               regulator-name = "camera_vdddo";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <1800000>;
+               regulator-always-on;
+       };
+
+       camera_vdda_2v8: camera_vdda_2v8 {
+               compatible = "regulator-fixed";
+               regulator-name = "camera_vdda";
+               regulator-min-microvolt = <2800000>;
+               regulator-max-microvolt = <2800000>;
+               regulator-always-on;
+       };
+
+       camera_vddd_1v5: camera_vddd_1v5 {
+               compatible = "regulator-fixed";
+               regulator-name = "camera_vddd";
+               regulator-min-microvolt = <1500000>;
+               regulator-max-microvolt = <1500000>;
+               regulator-always-on;
+       };
+
        reserved-memory {
                ramoops@bff00000{
                        compatible = "ramoops";
@@ -538,6 +562,58 @@
        };
 };
 
+&camss {
+       status = "ok";
+       ports {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               port@0 {
+                       reg = <0>;
+                       csiphy0_ep: endpoint {
+                               clock-lanes = <1>;
+                               data-lanes = <0 2>;
+                               remote-endpoint = <&ov5640_ep>;
+                               status = "okay";
+                       };
+               };
+       };
+};
+
+&cci {
+       status = "ok";
+};
+
+&cci_i2c0 {
+       camera_rear@3b {
+               compatible = "ovti,ov5640";
+               reg = <0x3b>;
+
+               enable-gpios = <&msmgpio 34 GPIO_ACTIVE_HIGH>;
+               reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&camera_rear_default>;
+
+               clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
+               clock-names = "xclk";
+               clock-frequency = <23880000>;
+
+               vdddo-supply = <&camera_vdddo_1v8>;
+               vdda-supply = <&camera_vdda_2v8>;
+               vddd-supply = <&camera_vddd_1v5>;
+
+               /* No camera mezzanine by default */
+               status = "disabled";
+
+               port {
+                       ov5640_ep: endpoint {
+                               clock-lanes = <1>;
+                               data-lanes = <0 2>;
+                               remote-endpoint = <&csiphy0_ep>;
+                       };
+               };
+       };
+};
+
 &spmi_bus {
        pm8916_0: pm8916@0 {
                pon@800 {