zlibheader := inffast.h inffixed.h inflate.h inftrees.h infutil.h
zliblinuxheader := zlib.h zconf.h zutil.h
-$(addprefix $(obj)/,$(zlib) cuboot-c2k.o gunzip_util.o main.o prpmc2800.o): \
+$(addprefix $(obj)/,$(zlib) cuboot-c2k.o gunzip_util.o main.o): \
$(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader))
libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
src-plat-$(CONFIG_EMBEDDED6xx) += cuboot-pq2.c cuboot-mpc7448hpc2.c \
cuboot-c2k.c gamecube-head.S \
gamecube.c wii-head.S wii.c holly.c \
- prpmc2800.c fixed-head.S mvme5100.c
+ fixed-head.S mvme5100.c
src-plat-$(CONFIG_AMIGAONE) += cuboot-amigaone.c
src-plat-$(CONFIG_PPC_PS3) += ps3-head.S ps3-hvcall.S ps3.c
src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c epapr-wrapper.c
image-$(CONFIG_PPC_EFIKA) += zImage.chrp
image-$(CONFIG_PPC_PMAC) += zImage.pmac
image-$(CONFIG_PPC_HOLLY) += dtbImage.holly
-image-$(CONFIG_PPC_PRPMC2800) += dtbImage.prpmc2800
image-$(CONFIG_DEFAULT_UIMAGE) += uImage
image-$(CONFIG_EPAPR_BOOT) += zImage.epapr
+++ /dev/null
-CONFIG_ALTIVEC=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_PMAC is not set
-CONFIG_EMBEDDED6xx=y
-CONFIG_PPC_PRPMC2800=y
-CONFIG_HIGHMEM=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_BINFMT_MISC=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_SECCOMP is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_PROC_DEVICETREE=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_IDE=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PDC202XX_NEW=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_SATA_MV=y
-CONFIG_MACINTOSH_DRIVERS=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_E100=y
-CONFIG_8139TOO=y
-# CONFIG_8139TOO_PIO is not set
-CONFIG_E1000=y
-CONFIG_MV643XX_ETH=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_MPSC=y
-CONFIG_SERIAL_MPSC_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MV64XXX=y
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-CONFIG_HID_DRAGONRISE=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_TWINHAN=y
-CONFIG_HID_NTRIG=y
-CONFIG_HID_ORTEK=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_HID_GREENASIA=y
-CONFIG_HID_SMARTJOYPLUS=y
-CONFIG_HID_TOPSEED=y
-CONFIG_HID_THRUSTMASTER=y
-CONFIG_THRUSTMASTER_FF=y
-CONFIG_HID_ZEROPLUS=y
-CONFIG_ZEROPLUS_FF=y
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_MAX6900=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_INOTIFY=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_CRC_T10DIF=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
+++ /dev/null
-/*
- * Board setup routines for the Motorola PrPMC2800
- *
- * Author: Dale Farnsworth <dale@farnsworth.org>
- *
- * 2007 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/seq_file.h>
-
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/time.h>
-
-#include <mm/mmu_decl.h>
-
-#include <sysdev/mv64x60.h>
-
-#define MV64x60_MPP_CNTL_0 0x0000
-#define MV64x60_MPP_CNTL_2 0x0008
-
-#define MV64x60_GPP_IO_CNTL 0x0000
-#define MV64x60_GPP_LEVEL_CNTL 0x0010
-#define MV64x60_GPP_VALUE_SET 0x0018
-
-#define PLATFORM_NAME_MAX 32
-
-static char prpmc2800_platform_name[PLATFORM_NAME_MAX];
-
-static void __iomem *mv64x60_mpp_reg_base;
-static void __iomem *mv64x60_gpp_reg_base;
-
-static void __init prpmc2800_setup_arch(void)
-{
- struct device_node *np;
- phys_addr_t paddr;
- const unsigned int *reg;
-
- /*
- * ioremap mpp and gpp registers in case they are later
- * needed by prpmc2800_reset_board().
- */
- np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-mpp");
- reg = of_get_property(np, "reg", NULL);
- paddr = of_translate_address(np, reg);
- of_node_put(np);
- mv64x60_mpp_reg_base = ioremap(paddr, reg[1]);
-
- np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-gpp");
- reg = of_get_property(np, "reg", NULL);
- paddr = of_translate_address(np, reg);
- of_node_put(np);
- mv64x60_gpp_reg_base = ioremap(paddr, reg[1]);
-
-#ifdef CONFIG_PCI
- mv64x60_pci_init();
-#endif
-
- printk("Motorola %s\n", prpmc2800_platform_name);
-}
-
-static void prpmc2800_reset_board(void)
-{
- u32 temp;
-
- local_irq_disable();
-
- temp = in_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_0);
- temp &= 0xFFFF0FFF;
- out_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_0, temp);
-
- temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL);
- temp |= 0x00000004;
- out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL, temp);
-
- temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL);
- temp |= 0x00000004;
- out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL, temp);
-
- temp = in_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_2);
- temp &= 0xFFFF0FFF;
- out_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_2, temp);
-
- temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL);
- temp |= 0x00080000;
- out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL, temp);
-
- temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL);
- temp |= 0x00080000;
- out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL, temp);
-
- out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_VALUE_SET, 0x00080004);
-}
-
-static void prpmc2800_restart(char *cmd)
-{
- volatile ulong i = 10000000;
-
- prpmc2800_reset_board();
-
- while (i-- > 0);
- panic("restart failed\n");
-}
-
-#ifdef CONFIG_NOT_COHERENT_CACHE
-#define PPRPM2800_COHERENCY_SETTING "off"
-#else
-#define PPRPM2800_COHERENCY_SETTING "on"
-#endif
-
-void prpmc2800_show_cpuinfo(struct seq_file *m)
-{
- seq_printf(m, "Vendor\t\t: Motorola\n");
- seq_printf(m, "coherency\t: %s\n", PPRPM2800_COHERENCY_SETTING);
-}
-
-/*
- * Called very early, device-tree isn't unflattened
- */
-static int __init prpmc2800_probe(void)
-{
- unsigned long root = of_get_flat_dt_root();
- unsigned long len = PLATFORM_NAME_MAX;
- void *m;
-
- if (!of_flat_dt_is_compatible(root, "motorola,PrPMC2800"))
- return 0;
-
- /* Update ppc_md.name with name from dt */
- m = of_get_flat_dt_prop(root, "model", &len);
- if (m)
- strncpy(prpmc2800_platform_name, m,
- min((int)len, PLATFORM_NAME_MAX - 1));
-
- _set_L2CR(_get_L2CR() | L2CR_L2E);
- return 1;
-}
-
-define_machine(prpmc2800){
- .name = prpmc2800_platform_name,
- .probe = prpmc2800_probe,
- .setup_arch = prpmc2800_setup_arch,
- .init_early = mv64x60_init_early,
- .show_cpuinfo = prpmc2800_show_cpuinfo,
- .init_IRQ = mv64x60_init_irq,
- .get_irq = mv64x60_get_irq,
- .restart = prpmc2800_restart,
- .calibrate_decr = generic_calibrate_decr,
-};
projects / linux.git / commitdiff