+++ /dev/null
-// SPDX-License-Identifier: GPL-1.0+
-/*
- * $Id: synclinkmp.c,v 4.38 2005/07/15 13:29:44 paulkf Exp $
- *
- * Device driver for Microgate SyncLink Multiport
- * high speed multiprotocol serial adapter.
- *
- * written by Paul Fulghum for Microgate Corporation
- * paulkf@microgate.com
- *
- * Microgate and SyncLink are trademarks of Microgate Corporation
- *
- * Derived from serial.c written by Theodore Ts'o and Linus Torvalds
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#define VERSION(ver,rel,seq) (((ver)<<16) | ((rel)<<8) | (seq))
-#if defined(__i386__)
-# define BREAKPOINT() asm(" int $3");
-#else
-# define BREAKPOINT() { }
-#endif
-
-#define MAX_DEVICES 12
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/serial.h>
-#include <linux/major.h>
-#include <linux/string.h>
-#include <linux/fcntl.h>
-#include <linux/ptrace.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/seq_file.h>
-#include <linux/slab.h>
-#include <linux/netdevice.h>
-#include <linux/vmalloc.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/ioctl.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/dma.h>
-#include <linux/bitops.h>
-#include <asm/types.h>
-#include <linux/termios.h>
-#include <linux/workqueue.h>
-#include <linux/hdlc.h>
-#include <linux/synclink.h>
-
-#if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINKMP_MODULE))
-#define SYNCLINK_GENERIC_HDLC 1
-#else
-#define SYNCLINK_GENERIC_HDLC 0
-#endif
-
-#define GET_USER(error,value,addr) error = get_user(value,addr)
-#define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0
-#define PUT_USER(error,value,addr) error = put_user(value,addr)
-#define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0
-
-#include <linux/uaccess.h>
-
-static MGSL_PARAMS default_params = {
- MGSL_MODE_HDLC, /* unsigned long mode */
- 0, /* unsigned char loopback; */
- HDLC_FLAG_UNDERRUN_ABORT15, /* unsigned short flags; */
- HDLC_ENCODING_NRZI_SPACE, /* unsigned char encoding; */
- 0, /* unsigned long clock_speed; */
- 0xff, /* unsigned char addr_filter; */
- HDLC_CRC_16_CCITT, /* unsigned short crc_type; */
- HDLC_PREAMBLE_LENGTH_8BITS, /* unsigned char preamble_length; */
- HDLC_PREAMBLE_PATTERN_NONE, /* unsigned char preamble; */
- 9600, /* unsigned long data_rate; */
- 8, /* unsigned char data_bits; */
- 1, /* unsigned char stop_bits; */
- ASYNC_PARITY_NONE /* unsigned char parity; */
-};
-
-/* size in bytes of DMA data buffers */
-#define SCABUFSIZE 1024
-#define SCA_MEM_SIZE 0x40000
-#define SCA_BASE_SIZE 512
-#define SCA_REG_SIZE 16
-#define SCA_MAX_PORTS 4
-#define SCAMAXDESC 128
-
-#define BUFFERLISTSIZE 4096
-
-/* SCA-I style DMA buffer descriptor */
-typedef struct _SCADESC
-{
- u16 next; /* lower l6 bits of next descriptor addr */
- u16 buf_ptr; /* lower 16 bits of buffer addr */
- u8 buf_base; /* upper 8 bits of buffer addr */
- u8 pad1;
- u16 length; /* length of buffer */
- u8 status; /* status of buffer */
- u8 pad2;
-} SCADESC, *PSCADESC;
-
-typedef struct _SCADESC_EX
-{
- /* device driver bookkeeping section */
- char *virt_addr; /* virtual address of data buffer */
- u16 phys_entry; /* lower 16-bits of physical address of this descriptor */
-} SCADESC_EX, *PSCADESC_EX;
-
-/* The queue of BH actions to be performed */
-
-#define BH_RECEIVE 1
-#define BH_TRANSMIT 2
-#define BH_STATUS 4
-
-#define IO_PIN_SHUTDOWN_LIMIT 100
-
-struct _input_signal_events {
- int ri_up;
- int ri_down;
- int dsr_up;
- int dsr_down;
- int dcd_up;
- int dcd_down;
- int cts_up;
- int cts_down;
-};
-
-/*
- * Device instance data structure
- */
-typedef struct _synclinkmp_info {
- void *if_ptr; /* General purpose pointer (used by SPPP) */
- int magic;
- struct tty_port port;
- int line;
- unsigned short close_delay;
- unsigned short closing_wait; /* time to wait before closing */
-
- struct mgsl_icount icount;
-
- int timeout;
- int x_char; /* xon/xoff character */
- u16 read_status_mask1; /* break detection (SR1 indications) */
- u16 read_status_mask2; /* parity/framing/overun (SR2 indications) */
- unsigned char ignore_status_mask1; /* break detection (SR1 indications) */
- unsigned char ignore_status_mask2; /* parity/framing/overun (SR2 indications) */
- unsigned char *tx_buf;
- int tx_put;
- int tx_get;
- int tx_count;
-
- wait_queue_head_t status_event_wait_q;
- wait_queue_head_t event_wait_q;
- struct timer_list tx_timer; /* HDLC transmit timeout timer */
- struct _synclinkmp_info *next_device; /* device list link */
- struct timer_list status_timer; /* input signal status check timer */
-
- spinlock_t lock; /* spinlock for synchronizing with ISR */
- struct work_struct task; /* task structure for scheduling bh */
-
- u32 max_frame_size; /* as set by device config */
-
- u32 pending_bh;
-
- bool bh_running; /* Protection from multiple */
- int isr_overflow;
- bool bh_requested;
-
- int dcd_chkcount; /* check counts to prevent */
- int cts_chkcount; /* too many IRQs if a signal */
- int dsr_chkcount; /* is floating */
- int ri_chkcount;
-
- char *buffer_list; /* virtual address of Rx & Tx buffer lists */
- unsigned long buffer_list_phys;
-
- unsigned int rx_buf_count; /* count of total allocated Rx buffers */
- SCADESC *rx_buf_list; /* list of receive buffer entries */
- SCADESC_EX rx_buf_list_ex[SCAMAXDESC]; /* list of receive buffer entries */
- unsigned int current_rx_buf;
-
- unsigned int tx_buf_count; /* count of total allocated Tx buffers */
- SCADESC *tx_buf_list; /* list of transmit buffer entries */
- SCADESC_EX tx_buf_list_ex[SCAMAXDESC]; /* list of transmit buffer entries */
- unsigned int last_tx_buf;
-
- unsigned char *tmp_rx_buf;
- unsigned int tmp_rx_buf_count;
-
- bool rx_enabled;
- bool rx_overflow;
-
- bool tx_enabled;
- bool tx_active;
- u32 idle_mode;
-
- unsigned char ie0_value;
- unsigned char ie1_value;
- unsigned char ie2_value;
- unsigned char ctrlreg_value;
- unsigned char old_signals;
-
- char device_name[25]; /* device instance name */
-
- int port_count;
- int adapter_num;
- int port_num;
-
- struct _synclinkmp_info *port_array[SCA_MAX_PORTS];
-
- unsigned int bus_type; /* expansion bus type (ISA,EISA,PCI) */
-
- unsigned int irq_level; /* interrupt level */
- unsigned long irq_flags;
- bool irq_requested; /* true if IRQ requested */
-
- MGSL_PARAMS params; /* communications parameters */
-
- unsigned char serial_signals; /* current serial signal states */
-
- bool irq_occurred; /* for diagnostics use */
- unsigned int init_error; /* Initialization startup error */
-
- u32 last_mem_alloc;
- unsigned char* memory_base; /* shared memory address (PCI only) */
- u32 phys_memory_base;
- int shared_mem_requested;
-
- unsigned char* sca_base; /* HD64570 SCA Memory address */
- u32 phys_sca_base;
- u32 sca_offset;
- bool sca_base_requested;
-
- unsigned char* lcr_base; /* local config registers (PCI only) */
- u32 phys_lcr_base;
- u32 lcr_offset;
- int lcr_mem_requested;
-
- unsigned char* statctrl_base; /* status/control register memory */
- u32 phys_statctrl_base;
- u32 statctrl_offset;
- bool sca_statctrl_requested;
-
- u32 misc_ctrl_value;
- char *flag_buf;
- bool drop_rts_on_tx_done;
-
- struct _input_signal_events input_signal_events;
-
- /* SPPP/Cisco HDLC device parts */
- int netcount;
- spinlock_t netlock;
-
-#if SYNCLINK_GENERIC_HDLC
- struct net_device *netdev;
-#endif
-
-} SLMP_INFO;
-
-#define MGSL_MAGIC 0x5401
-
-/*
- * define serial signal status change macros
- */
-#define MISCSTATUS_DCD_LATCHED (SerialSignal_DCD<<8) /* indicates change in DCD */
-#define MISCSTATUS_RI_LATCHED (SerialSignal_RI<<8) /* indicates change in RI */
-#define MISCSTATUS_CTS_LATCHED (SerialSignal_CTS<<8) /* indicates change in CTS */
-#define MISCSTATUS_DSR_LATCHED (SerialSignal_DSR<<8) /* change in DSR */
-
-/* Common Register macros */
-#define LPR 0x00
-#define PABR0 0x02
-#define PABR1 0x03
-#define WCRL 0x04
-#define WCRM 0x05
-#define WCRH 0x06
-#define DPCR 0x08
-#define DMER 0x09
-#define ISR0 0x10
-#define ISR1 0x11
-#define ISR2 0x12
-#define IER0 0x14
-#define IER1 0x15
-#define IER2 0x16
-#define ITCR 0x18
-#define INTVR 0x1a
-#define IMVR 0x1c
-
-/* MSCI Register macros */
-#define TRB 0x20
-#define TRBL 0x20
-#define TRBH 0x21
-#define SR0 0x22
-#define SR1 0x23
-#define SR2 0x24
-#define SR3 0x25
-#define FST 0x26
-#define IE0 0x28
-#define IE1 0x29
-#define IE2 0x2a
-#define FIE 0x2b
-#define CMD 0x2c
-#define MD0 0x2e
-#define MD1 0x2f
-#define MD2 0x30
-#define CTL 0x31
-#define SA0 0x32
-#define SA1 0x33
-#define IDL 0x34
-#define TMC 0x35
-#define RXS 0x36
-#define TXS 0x37
-#define TRC0 0x38
-#define TRC1 0x39
-#define RRC 0x3a
-#define CST0 0x3c
-#define CST1 0x3d
-
-/* Timer Register Macros */
-#define TCNT 0x60
-#define TCNTL 0x60
-#define TCNTH 0x61
-#define TCONR 0x62
-#define TCONRL 0x62
-#define TCONRH 0x63
-#define TMCS 0x64
-#define TEPR 0x65
-
-/* DMA Controller Register macros */
-#define DARL 0x80
-#define DARH 0x81
-#define DARB 0x82
-#define BAR 0x80
-#define BARL 0x80
-#define BARH 0x81
-#define BARB 0x82
-#define SAR 0x84
-#define SARL 0x84
-#define SARH 0x85
-#define SARB 0x86
-#define CPB 0x86
-#define CDA 0x88
-#define CDAL 0x88
-#define CDAH 0x89
-#define EDA 0x8a
-#define EDAL 0x8a
-#define EDAH 0x8b
-#define BFL 0x8c
-#define BFLL 0x8c
-#define BFLH 0x8d
-#define BCR 0x8e
-#define BCRL 0x8e
-#define BCRH 0x8f
-#define DSR 0x90
-#define DMR 0x91
-#define FCT 0x93
-#define DIR 0x94
-#define DCMD 0x95
-
-/* combine with timer or DMA register address */
-#define TIMER0 0x00
-#define TIMER1 0x08
-#define TIMER2 0x10
-#define TIMER3 0x18
-#define RXDMA 0x00
-#define TXDMA 0x20
-
-/* SCA Command Codes */
-#define NOOP 0x00
-#define TXRESET 0x01
-#define TXENABLE 0x02
-#define TXDISABLE 0x03
-#define TXCRCINIT 0x04
-#define TXCRCEXCL 0x05
-#define TXEOM 0x06
-#define TXABORT 0x07
-#define MPON 0x08
-#define TXBUFCLR 0x09
-#define RXRESET 0x11
-#define RXENABLE 0x12
-#define RXDISABLE 0x13
-#define RXCRCINIT 0x14
-#define RXREJECT 0x15
-#define SEARCHMP 0x16
-#define RXCRCEXCL 0x17
-#define RXCRCCALC 0x18
-#define CHRESET 0x21
-#define HUNT 0x31
-
-/* DMA command codes */
-#define SWABORT 0x01
-#define FEICLEAR 0x02
-
-/* IE0 */
-#define TXINTE BIT7
-#define RXINTE BIT6
-#define TXRDYE BIT1
-#define RXRDYE BIT0
-
-/* IE1 & SR1 */
-#define UDRN BIT7
-#define IDLE BIT6
-#define SYNCD BIT4
-#define FLGD BIT4
-#define CCTS BIT3
-#define CDCD BIT2
-#define BRKD BIT1
-#define ABTD BIT1
-#define GAPD BIT1
-#define BRKE BIT0
-#define IDLD BIT0
-
-/* IE2 & SR2 */
-#define EOM BIT7
-#define PMP BIT6
-#define SHRT BIT6
-#define PE BIT5
-#define ABT BIT5
-#define FRME BIT4
-#define RBIT BIT4
-#define OVRN BIT3
-#define CRCE BIT2
-
-
-/*
- * Global linked list of SyncLink devices
- */
-static SLMP_INFO *synclinkmp_device_list = NULL;
-static int synclinkmp_adapter_count = -1;
-static int synclinkmp_device_count = 0;
-
-/*
- * Set this param to non-zero to load eax with the
- * .text section address and breakpoint on module load.
- * This is useful for use with gdb and add-symbol-file command.
- */
-static bool break_on_load = 0;
-
-/*
- * Driver major number, defaults to zero to get auto
- * assigned major number. May be forced as module parameter.
- */
-static int ttymajor = 0;
-
-/*
- * Array of user specified options for ISA adapters.
- */
-static int debug_level = 0;
-static int maxframe[MAX_DEVICES] = {0,};
-
-module_param(break_on_load, bool, 0);
-module_param(ttymajor, int, 0);
-module_param(debug_level, int, 0);
-module_param_array(maxframe, int, NULL, 0);
-
-static char *driver_name = "SyncLink MultiPort driver";
-static char *driver_version = "$Revision: 4.38 $";
-
-static int synclinkmp_init_one(struct pci_dev *dev,const struct pci_device_id *ent);
-static void synclinkmp_remove_one(struct pci_dev *dev);
-
-static const struct pci_device_id synclinkmp_pci_tbl[] = {
- { PCI_VENDOR_ID_MICROGATE, PCI_DEVICE_ID_MICROGATE_SCA, PCI_ANY_ID, PCI_ANY_ID, },
- { 0, }, /* terminate list */
-};
-MODULE_DEVICE_TABLE(pci, synclinkmp_pci_tbl);
-
-MODULE_LICENSE("GPL");
-
-static struct pci_driver synclinkmp_pci_driver = {
- .name = "synclinkmp",
- .id_table = synclinkmp_pci_tbl,
- .probe = synclinkmp_init_one,
- .remove = synclinkmp_remove_one,
-};
-
-
-static struct tty_driver *serial_driver;
-
-/* number of characters left in xmit buffer before we ask for more */
-#define WAKEUP_CHARS 256
-
-
-/* tty callbacks */
-
-static int open(struct tty_struct *tty, struct file * filp);
-static void close(struct tty_struct *tty, struct file * filp);
-static void hangup(struct tty_struct *tty);
-static void set_termios(struct tty_struct *tty, struct ktermios *old_termios);
-
-static int write(struct tty_struct *tty, const unsigned char *buf, int count);
-static int put_char(struct tty_struct *tty, unsigned char ch);
-static void send_xchar(struct tty_struct *tty, char ch);
-static void wait_until_sent(struct tty_struct *tty, int timeout);
-static int write_room(struct tty_struct *tty);
-static void flush_chars(struct tty_struct *tty);
-static void flush_buffer(struct tty_struct *tty);
-static void tx_hold(struct tty_struct *tty);
-static void tx_release(struct tty_struct *tty);
-
-static int ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg);
-static int chars_in_buffer(struct tty_struct *tty);
-static void throttle(struct tty_struct * tty);
-static void unthrottle(struct tty_struct * tty);
-static int set_break(struct tty_struct *tty, int break_state);
-
-#if SYNCLINK_GENERIC_HDLC
-#define dev_to_port(D) (dev_to_hdlc(D)->priv)
-static void hdlcdev_tx_done(SLMP_INFO *info);
-static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size);
-static int hdlcdev_init(SLMP_INFO *info);
-static void hdlcdev_exit(SLMP_INFO *info);
-#endif
-
-/* ioctl handlers */
-
-static int get_stats(SLMP_INFO *info, struct mgsl_icount __user *user_icount);
-static int get_params(SLMP_INFO *info, MGSL_PARAMS __user *params);
-static int set_params(SLMP_INFO *info, MGSL_PARAMS __user *params);
-static int get_txidle(SLMP_INFO *info, int __user *idle_mode);
-static int set_txidle(SLMP_INFO *info, int idle_mode);
-static int tx_enable(SLMP_INFO *info, int enable);
-static int tx_abort(SLMP_INFO *info);
-static int rx_enable(SLMP_INFO *info, int enable);
-static int modem_input_wait(SLMP_INFO *info,int arg);
-static int wait_mgsl_event(SLMP_INFO *info, int __user *mask_ptr);
-static int tiocmget(struct tty_struct *tty);
-static int tiocmset(struct tty_struct *tty,
- unsigned int set, unsigned int clear);
-static int set_break(struct tty_struct *tty, int break_state);
-
-static int add_device(SLMP_INFO *info);
-static int device_init(int adapter_num, struct pci_dev *pdev);
-static int claim_resources(SLMP_INFO *info);
-static void release_resources(SLMP_INFO *info);
-
-static int startup(SLMP_INFO *info);
-static int block_til_ready(struct tty_struct *tty, struct file * filp,SLMP_INFO *info);
-static int carrier_raised(struct tty_port *port);
-static void shutdown(SLMP_INFO *info);
-static void program_hw(SLMP_INFO *info);
-static void change_params(SLMP_INFO *info);
-
-static bool init_adapter(SLMP_INFO *info);
-static bool register_test(SLMP_INFO *info);
-static bool irq_test(SLMP_INFO *info);
-static bool loopback_test(SLMP_INFO *info);
-static int adapter_test(SLMP_INFO *info);
-static bool memory_test(SLMP_INFO *info);
-
-static void reset_adapter(SLMP_INFO *info);
-static void reset_port(SLMP_INFO *info);
-static void async_mode(SLMP_INFO *info);
-static void hdlc_mode(SLMP_INFO *info);
-
-static void rx_stop(SLMP_INFO *info);
-static void rx_start(SLMP_INFO *info);
-static void rx_reset_buffers(SLMP_INFO *info);
-static void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last);
-static bool rx_get_frame(SLMP_INFO *info);
-
-static void tx_start(SLMP_INFO *info);
-static void tx_stop(SLMP_INFO *info);
-static void tx_load_fifo(SLMP_INFO *info);
-static void tx_set_idle(SLMP_INFO *info);
-static void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count);
-
-static void get_signals(SLMP_INFO *info);
-static void set_signals(SLMP_INFO *info);
-static void enable_loopback(SLMP_INFO *info, int enable);
-static void set_rate(SLMP_INFO *info, u32 data_rate);
-
-static int bh_action(SLMP_INFO *info);
-static void bh_handler(struct work_struct *work);
-static void bh_receive(SLMP_INFO *info);
-static void bh_transmit(SLMP_INFO *info);
-static void bh_status(SLMP_INFO *info);
-static void isr_timer(SLMP_INFO *info);
-static void isr_rxint(SLMP_INFO *info);
-static void isr_rxrdy(SLMP_INFO *info);
-static void isr_txint(SLMP_INFO *info);
-static void isr_txrdy(SLMP_INFO *info);
-static void isr_rxdmaok(SLMP_INFO *info);
-static void isr_rxdmaerror(SLMP_INFO *info);
-static void isr_txdmaok(SLMP_INFO *info);
-static void isr_txdmaerror(SLMP_INFO *info);
-static void isr_io_pin(SLMP_INFO *info, u16 status);
-
-static int alloc_dma_bufs(SLMP_INFO *info);
-static void free_dma_bufs(SLMP_INFO *info);
-static int alloc_buf_list(SLMP_INFO *info);
-static int alloc_frame_bufs(SLMP_INFO *info, SCADESC *list, SCADESC_EX *list_ex,int count);
-static int alloc_tmp_rx_buf(SLMP_INFO *info);
-static void free_tmp_rx_buf(SLMP_INFO *info);
-
-static void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count);
-static void trace_block(SLMP_INFO *info, const char* data, int count, int xmit);
-static void tx_timeout(struct timer_list *t);
-static void status_timeout(struct timer_list *t);
-
-static unsigned char read_reg(SLMP_INFO *info, unsigned char addr);
-static void write_reg(SLMP_INFO *info, unsigned char addr, unsigned char val);
-static u16 read_reg16(SLMP_INFO *info, unsigned char addr);
-static void write_reg16(SLMP_INFO *info, unsigned char addr, u16 val);
-static unsigned char read_status_reg(SLMP_INFO * info);
-static void write_control_reg(SLMP_INFO * info);
-
-
-static unsigned char rx_active_fifo_level = 16; // rx request FIFO activation level in bytes
-static unsigned char tx_active_fifo_level = 16; // tx request FIFO activation level in bytes
-static unsigned char tx_negate_fifo_level = 32; // tx request FIFO negation level in bytes
-
-static u32 misc_ctrl_value = 0x007e4040;
-static u32 lcr1_brdr_value = 0x00800028;
-
-static u32 read_ahead_count = 8;
-
-/* DPCR, DMA Priority Control
- *
- * 07..05 Not used, must be 0
- * 04 BRC, bus release condition: 0=all transfers complete
- * 1=release after 1 xfer on all channels
- * 03 CCC, channel change condition: 0=every cycle
- * 1=after each channel completes all xfers
- * 02..00 PR<2..0>, priority 100=round robin
- *
- * 00000100 = 0x00
- */
-static unsigned char dma_priority = 0x04;
-
-// Number of bytes that can be written to shared RAM
-// in a single write operation
-static u32 sca_pci_load_interval = 64;
-
-/*
- * 1st function defined in .text section. Calling this function in
- * init_module() followed by a breakpoint allows a remote debugger
- * (gdb) to get the .text address for the add-symbol-file command.
- * This allows remote debugging of dynamically loadable modules.
- */
-static void* synclinkmp_get_text_ptr(void);
-static void* synclinkmp_get_text_ptr(void) {return synclinkmp_get_text_ptr;}
-
-static inline int sanity_check(SLMP_INFO *info,
- char *name, const char *routine)
-{
-#ifdef SANITY_CHECK
- static const char *badmagic =
- "Warning: bad magic number for synclinkmp_struct (%s) in %s\n";
- static const char *badinfo =
- "Warning: null synclinkmp_struct for (%s) in %s\n";
-
- if (!info) {
- printk(badinfo, name, routine);
- return 1;
- }
- if (info->magic != MGSL_MAGIC) {
- printk(badmagic, name, routine);
- return 1;
- }
-#else
- if (!info)
- return 1;
-#endif
- return 0;
-}
-
-/*
- * line discipline callback wrappers
- *
- * The wrappers maintain line discipline references
- * while calling into the line discipline.
- *
- * ldisc_receive_buf - pass receive data to line discipline
- */
-
-static void ldisc_receive_buf(struct tty_struct *tty,
- const __u8 *data, char *flags, int count)
-{
- struct tty_ldisc *ld;
- if (!tty)
- return;
- ld = tty_ldisc_ref(tty);
- if (ld) {
- if (ld->ops->receive_buf)
- ld->ops->receive_buf(tty, data, flags, count);
- tty_ldisc_deref(ld);
- }
-}
-
-/* tty callbacks */
-
-static int install(struct tty_driver *driver, struct tty_struct *tty)
-{
- SLMP_INFO *info;
- int line = tty->index;
-
- if (line >= synclinkmp_device_count) {
- printk("%s(%d): open with invalid line #%d.\n",
- __FILE__,__LINE__,line);
- return -ENODEV;
- }
-
- info = synclinkmp_device_list;
- while (info && info->line != line)
- info = info->next_device;
- if (sanity_check(info, tty->name, "open"))
- return -ENODEV;
- if (info->init_error) {
- printk("%s(%d):%s device is not allocated, init error=%d\n",
- __FILE__, __LINE__, info->device_name,
- info->init_error);
- return -ENODEV;
- }
-
- tty->driver_data = info;
-
- return tty_port_install(&info->port, driver, tty);
-}
-
-/* Called when a port is opened. Init and enable port.
- */
-static int open(struct tty_struct *tty, struct file *filp)
-{
- SLMP_INFO *info = tty->driver_data;
- unsigned long flags;
- int retval;
-
- info->port.tty = tty;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):%s open(), old ref count = %d\n",
- __FILE__,__LINE__,tty->driver->name, info->port.count);
-
- info->port.low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
-
- spin_lock_irqsave(&info->netlock, flags);
- if (info->netcount) {
- retval = -EBUSY;
- spin_unlock_irqrestore(&info->netlock, flags);
- goto cleanup;
- }
- info->port.count++;
- spin_unlock_irqrestore(&info->netlock, flags);
-
- if (info->port.count == 1) {
- /* 1st open on this device, init hardware */
- retval = startup(info);
- if (retval < 0)
- goto cleanup;
- }
-
- retval = block_til_ready(tty, filp, info);
- if (retval) {
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):%s block_til_ready() returned %d\n",
- __FILE__,__LINE__, info->device_name, retval);
- goto cleanup;
- }
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):%s open() success\n",
- __FILE__,__LINE__, info->device_name);
- retval = 0;
-
-cleanup:
- if (retval) {
- if (tty->count == 1)
- info->port.tty = NULL; /* tty layer will release tty struct */
- if(info->port.count)
- info->port.count--;
- }
-
- return retval;
-}
-
-/* Called when port is closed. Wait for remaining data to be
- * sent. Disable port and free resources.
- */
-static void close(struct tty_struct *tty, struct file *filp)
-{
- SLMP_INFO * info = tty->driver_data;
-
- if (sanity_check(info, tty->name, "close"))
- return;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):%s close() entry, count=%d\n",
- __FILE__,__LINE__, info->device_name, info->port.count);
-
- if (tty_port_close_start(&info->port, tty, filp) == 0)
- goto cleanup;
-
- mutex_lock(&info->port.mutex);
- if (tty_port_initialized(&info->port))
- wait_until_sent(tty, info->timeout);
-
- flush_buffer(tty);
- tty_ldisc_flush(tty);
- shutdown(info);
- mutex_unlock(&info->port.mutex);
-
- tty_port_close_end(&info->port, tty);
- info->port.tty = NULL;
-cleanup:
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):%s close() exit, count=%d\n", __FILE__,__LINE__,
- tty->driver->name, info->port.count);
-}
-
-/* Called by tty_hangup() when a hangup is signaled.
- * This is the same as closing all open descriptors for the port.
- */
-static void hangup(struct tty_struct *tty)
-{
- SLMP_INFO *info = tty->driver_data;
- unsigned long flags;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):%s hangup()\n",
- __FILE__,__LINE__, info->device_name );
-
- if (sanity_check(info, tty->name, "hangup"))
- return;
-
- mutex_lock(&info->port.mutex);
- flush_buffer(tty);
- shutdown(info);
-
- spin_lock_irqsave(&info->port.lock, flags);
- info->port.count = 0;
- info->port.tty = NULL;
- spin_unlock_irqrestore(&info->port.lock, flags);
- tty_port_set_active(&info->port, 1);
- mutex_unlock(&info->port.mutex);
-
- wake_up_interruptible(&info->port.open_wait);
-}
-
-/* Set new termios settings
- */
-static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
-{
- SLMP_INFO *info = tty->driver_data;
- unsigned long flags;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):%s set_termios()\n", __FILE__,__LINE__,
- tty->driver->name );
-
- change_params(info);
-
- /* Handle transition to B0 status */
- if ((old_termios->c_cflag & CBAUD) && !C_BAUD(tty)) {
- info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
- spin_lock_irqsave(&info->lock,flags);
- set_signals(info);
- spin_unlock_irqrestore(&info->lock,flags);
- }
-
- /* Handle transition away from B0 status */
- if (!(old_termios->c_cflag & CBAUD) && C_BAUD(tty)) {
- info->serial_signals |= SerialSignal_DTR;
- if (!C_CRTSCTS(tty) || !tty_throttled(tty))
- info->serial_signals |= SerialSignal_RTS;
- spin_lock_irqsave(&info->lock,flags);
- set_signals(info);
- spin_unlock_irqrestore(&info->lock,flags);
- }
-
- /* Handle turning off CRTSCTS */
- if (old_termios->c_cflag & CRTSCTS && !C_CRTSCTS(tty)) {
- tty->hw_stopped = 0;
- tx_release(tty);
- }
-}
-
-/* Send a block of data
- *
- * Arguments:
- *
- * tty pointer to tty information structure
- * buf pointer to buffer containing send data
- * count size of send data in bytes
- *
- * Return Value: number of characters written
- */
-static int write(struct tty_struct *tty,
- const unsigned char *buf, int count)
-{
- int c, ret = 0;
- SLMP_INFO *info = tty->driver_data;
- unsigned long flags;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):%s write() count=%d\n",
- __FILE__,__LINE__,info->device_name,count);
-
- if (sanity_check(info, tty->name, "write"))
- goto cleanup;
-
- if (!info->tx_buf)
- goto cleanup;
-
- if (info->params.mode == MGSL_MODE_HDLC) {
- if (count > info->max_frame_size) {
- ret = -EIO;
- goto cleanup;
- }
- if (info->tx_active)
- goto cleanup;
- if (info->tx_count) {
- /* send accumulated data from send_char() calls */
- /* as frame and wait before accepting more data. */
- tx_load_dma_buffer(info, info->tx_buf, info->tx_count);
- goto start;
- }
- ret = info->tx_count = count;
- tx_load_dma_buffer(info, buf, count);
- goto start;
- }
-
- for (;;) {
- c = min_t(int, count,
- min(info->max_frame_size - info->tx_count - 1,
- info->max_frame_size - info->tx_put));
- if (c <= 0)
- break;
-
- memcpy(info->tx_buf + info->tx_put, buf, c);
-
- spin_lock_irqsave(&info->lock,flags);
- info->tx_put += c;
- if (info->tx_put >= info->max_frame_size)
- info->tx_put -= info->max_frame_size;
- info->tx_count += c;
- spin_unlock_irqrestore(&info->lock,flags);
-
- buf += c;
- count -= c;
- ret += c;
- }
-
- if (info->params.mode == MGSL_MODE_HDLC) {
- if (count) {
- ret = info->tx_count = 0;
- goto cleanup;
- }
- tx_load_dma_buffer(info, info->tx_buf, info->tx_count);
- }
-start:
- if (info->tx_count && !tty->stopped && !tty->hw_stopped) {
- spin_lock_irqsave(&info->lock,flags);
- if (!info->tx_active)
- tx_start(info);
- spin_unlock_irqrestore(&info->lock,flags);
- }
-
-cleanup:
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk( "%s(%d):%s write() returning=%d\n",
- __FILE__,__LINE__,info->device_name,ret);
- return ret;
-}
-
-/* Add a character to the transmit buffer.
- */
-static int put_char(struct tty_struct *tty, unsigned char ch)
-{
- SLMP_INFO *info = tty->driver_data;
- unsigned long flags;
- int ret = 0;
-
- if ( debug_level >= DEBUG_LEVEL_INFO ) {
- printk( "%s(%d):%s put_char(%d)\n",
- __FILE__,__LINE__,info->device_name,ch);
- }
-
- if (sanity_check(info, tty->name, "put_char"))
- return 0;
-
- if (!info->tx_buf)
- return 0;
-
- spin_lock_irqsave(&info->lock,flags);
-
- if ( (info->params.mode != MGSL_MODE_HDLC) ||
- !info->tx_active ) {
-
- if (info->tx_count < info->max_frame_size - 1) {
- info->tx_buf[info->tx_put++] = ch;
- if (info->tx_put >= info->max_frame_size)
- info->tx_put -= info->max_frame_size;
- info->tx_count++;
- ret = 1;
- }
- }
-
- spin_unlock_irqrestore(&info->lock,flags);
- return ret;
-}
-
-/* Send a high-priority XON/XOFF character
- */
-static void send_xchar(struct tty_struct *tty, char ch)
-{
- SLMP_INFO *info = tty->driver_data;
- unsigned long flags;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):%s send_xchar(%d)\n",
- __FILE__,__LINE__, info->device_name, ch );
-
- if (sanity_check(info, tty->name, "send_xchar"))
- return;
-
- info->x_char = ch;
- if (ch) {
- /* Make sure transmit interrupts are on */
- spin_lock_irqsave(&info->lock,flags);
- if (!info->tx_enabled)
- tx_start(info);
- spin_unlock_irqrestore(&info->lock,flags);
- }
-}
-
-/* Wait until the transmitter is empty.
- */
-static void wait_until_sent(struct tty_struct *tty, int timeout)
-{
- SLMP_INFO * info = tty->driver_data;
- unsigned long orig_jiffies, char_time;
-
- if (!info )
- return;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):%s wait_until_sent() entry\n",
- __FILE__,__LINE__, info->device_name );
-
- if (sanity_check(info, tty->name, "wait_until_sent"))
- return;
-
- if (!tty_port_initialized(&info->port))
- goto exit;
-
- orig_jiffies = jiffies;
-
- /* Set check interval to 1/5 of estimated time to
- * send a character, and make it at least 1. The check
- * interval should also be less than the timeout.
- * Note: use tight timings here to satisfy the NIST-PCTS.
- */
-
- if ( info->params.data_rate ) {
- char_time = info->timeout/(32 * 5);
- if (!char_time)
- char_time++;
- } else
- char_time = 1;
-
- if (timeout)
- char_time = min_t(unsigned long, char_time, timeout);
-
- if ( info->params.mode == MGSL_MODE_HDLC ) {
- while (info->tx_active) {
- msleep_interruptible(jiffies_to_msecs(char_time));
- if (signal_pending(current))
- break;
- if (timeout && time_after(jiffies, orig_jiffies + timeout))
- break;
- }
- } else {
- /*
- * TODO: determine if there is something similar to USC16C32
- * TXSTATUS_ALL_SENT status
- */
- while ( info->tx_active && info->tx_enabled) {
- msleep_interruptible(jiffies_to_msecs(char_time));
- if (signal_pending(current))
- break;
- if (timeout && time_after(jiffies, orig_jiffies + timeout))
- break;
- }
- }
-
-exit:
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):%s wait_until_sent() exit\n",
- __FILE__,__LINE__, info->device_name );
-}
-
-/* Return the count of free bytes in transmit buffer
- */
-static int write_room(struct tty_struct *tty)
-{
- SLMP_INFO *info = tty->driver_data;
- int ret;
-
- if (sanity_check(info, tty->name, "write_room"))
- return 0;
-
- if (info->params.mode == MGSL_MODE_HDLC) {
- ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE;
- } else {
- ret = info->max_frame_size - info->tx_count - 1;
- if (ret < 0)
- ret = 0;
- }
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):%s write_room()=%d\n",
- __FILE__, __LINE__, info->device_name, ret);
-
- return ret;
-}
-
-/* enable transmitter and send remaining buffered characters
- */
-static void flush_chars(struct tty_struct *tty)
-{
- SLMP_INFO *info = tty->driver_data;
- unsigned long flags;
-
- if ( debug_level >= DEBUG_LEVEL_INFO )
- printk( "%s(%d):%s flush_chars() entry tx_count=%d\n",
- __FILE__,__LINE__,info->device_name,info->tx_count);
-
- if (sanity_check(info, tty->name, "flush_chars"))
- return;
-
- if (info->tx_count <= 0 || tty->stopped || tty->hw_stopped ||
- !info->tx_buf)
- return;
-
- if ( debug_level >= DEBUG_LEVEL_INFO )
- printk( "%s(%d):%s flush_chars() entry, starting transmitter\n",
- __FILE__,__LINE__,info->device_name );
-
- spin_lock_irqsave(&info->lock,flags);
-
- if (!info->tx_active) {
- if ( (info->params.mode == MGSL_MODE_HDLC) &&
- info->tx_count ) {
- /* operating in synchronous (frame oriented) mode */
- /* copy data from circular tx_buf to */
- /* transmit DMA buffer. */
- tx_load_dma_buffer(info,
- info->tx_buf,info->tx_count);
- }
- tx_start(info);
- }
-
- spin_unlock_irqrestore(&info->lock,flags);
-}
-
-/* Discard all data in the send buffer
- */
-static void flush_buffer(struct tty_struct *tty)
-{
- SLMP_INFO *info = tty->driver_data;
- unsigned long flags;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):%s flush_buffer() entry\n",
- __FILE__,__LINE__, info->device_name );
-
- if (sanity_check(info, tty->name, "flush_buffer"))
- return;
-
- spin_lock_irqsave(&info->lock,flags);
- info->tx_count = info->tx_put = info->tx_get = 0;
- del_timer(&info->tx_timer);
- spin_unlock_irqrestore(&info->lock,flags);
-
- tty_wakeup(tty);
-}
-
-/* throttle (stop) transmitter
- */
-static void tx_hold(struct tty_struct *tty)
-{
- SLMP_INFO *info = tty->driver_data;
- unsigned long flags;
-
- if (sanity_check(info, tty->name, "tx_hold"))
- return;
-
- if ( debug_level >= DEBUG_LEVEL_INFO )
- printk("%s(%d):%s tx_hold()\n",
- __FILE__,__LINE__,info->device_name);
-
- spin_lock_irqsave(&info->lock,flags);
- if (info->tx_enabled)
- tx_stop(info);
- spin_unlock_irqrestore(&info->lock,flags);
-}
-
-/* release (start) transmitter
- */
-static void tx_release(struct tty_struct *tty)
-{
- SLMP_INFO *info = tty->driver_data;
- unsigned long flags;
-
- if (sanity_check(info, tty->name, "tx_release"))
- return;
-
- if ( debug_level >= DEBUG_LEVEL_INFO )
- printk("%s(%d):%s tx_release()\n",
- __FILE__,__LINE__,info->device_name);
-
- spin_lock_irqsave(&info->lock,flags);
- if (!info->tx_enabled)
- tx_start(info);
- spin_unlock_irqrestore(&info->lock,flags);
-}
-
-/* Service an IOCTL request
- *
- * Arguments:
- *
- * tty pointer to tty instance data
- * cmd IOCTL command code
- * arg command argument/context
- *
- * Return Value: 0 if success, otherwise error code
- */
-static int ioctl(struct tty_struct *tty,
- unsigned int cmd, unsigned long arg)
-{
- SLMP_INFO *info = tty->driver_data;
- void __user *argp = (void __user *)arg;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):%s ioctl() cmd=%08X\n", __FILE__,__LINE__,
- info->device_name, cmd );
-
- if (sanity_check(info, tty->name, "ioctl"))
- return -ENODEV;
-
- if (cmd != TIOCMIWAIT) {
- if (tty_io_error(tty))
- return -EIO;
- }
-
- switch (cmd) {
- case MGSL_IOCGPARAMS:
- return get_params(info, argp);
- case MGSL_IOCSPARAMS:
- return set_params(info, argp);
- case MGSL_IOCGTXIDLE:
- return get_txidle(info, argp);
- case MGSL_IOCSTXIDLE:
- return set_txidle(info, (int)arg);
- case MGSL_IOCTXENABLE:
- return tx_enable(info, (int)arg);
- case MGSL_IOCRXENABLE:
- return rx_enable(info, (int)arg);
- case MGSL_IOCTXABORT:
- return tx_abort(info);
- case MGSL_IOCGSTATS:
- return get_stats(info, argp);
- case MGSL_IOCWAITEVENT:
- return wait_mgsl_event(info, argp);
- case MGSL_IOCLOOPTXDONE:
- return 0; // TODO: Not supported, need to document
- /* Wait for modem input (DCD,RI,DSR,CTS) change
- * as specified by mask in arg (TIOCM_RNG/DSR/CD/CTS)
- */
- case TIOCMIWAIT:
- return modem_input_wait(info,(int)arg);
-
- /*
- * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
- * Return: write counters to the user passed counter struct
- * NB: both 1->0 and 0->1 transitions are counted except for
- * RI where only 0->1 is counted.
- */
- default:
- return -ENOIOCTLCMD;
- }
- return 0;
-}
-
-static int get_icount(struct tty_struct *tty,
- struct serial_icounter_struct *icount)
-{
- SLMP_INFO *info = tty->driver_data;
- struct mgsl_icount cnow; /* kernel counter temps */
- unsigned long flags;
-
- spin_lock_irqsave(&info->lock,flags);
- cnow = info->icount;
- spin_unlock_irqrestore(&info->lock,flags);
-
- icount->cts = cnow.cts;
- icount->dsr = cnow.dsr;
- icount->rng = cnow.rng;
- icount->dcd = cnow.dcd;
- icount->rx = cnow.rx;
- icount->tx = cnow.tx;
- icount->frame = cnow.frame;
- icount->overrun = cnow.overrun;
- icount->parity = cnow.parity;
- icount->brk = cnow.brk;
- icount->buf_overrun = cnow.buf_overrun;
-
- return 0;
-}
-
-/*
- * /proc fs routines....
- */
-
-static inline void line_info(struct seq_file *m, SLMP_INFO *info)
-{
- char stat_buf[30];
- unsigned long flags;
-
- seq_printf(m, "%s: SCABase=%08x Mem=%08X StatusControl=%08x LCR=%08X\n"
- "\tIRQ=%d MaxFrameSize=%u\n",
- info->device_name,
- info->phys_sca_base,
- info->phys_memory_base,
- info->phys_statctrl_base,
- info->phys_lcr_base,
- info->irq_level,
- info->max_frame_size );
-
- /* output current serial signal states */
- spin_lock_irqsave(&info->lock,flags);
- get_signals(info);
- spin_unlock_irqrestore(&info->lock,flags);
-
- stat_buf[0] = 0;
- stat_buf[1] = 0;
- if (info->serial_signals & SerialSignal_RTS)
- strcat(stat_buf, "|RTS");
- if (info->serial_signals & SerialSignal_CTS)
- strcat(stat_buf, "|CTS");
- if (info->serial_signals & SerialSignal_DTR)
- strcat(stat_buf, "|DTR");
- if (info->serial_signals & SerialSignal_DSR)
- strcat(stat_buf, "|DSR");
- if (info->serial_signals & SerialSignal_DCD)
- strcat(stat_buf, "|CD");
- if (info->serial_signals & SerialSignal_RI)
- strcat(stat_buf, "|RI");
-
- if (info->params.mode == MGSL_MODE_HDLC) {
- seq_printf(m, "\tHDLC txok:%d rxok:%d",
- info->icount.txok, info->icount.rxok);
- if (info->icount.txunder)
- seq_printf(m, " txunder:%d", info->icount.txunder);
- if (info->icount.txabort)
- seq_printf(m, " txabort:%d", info->icount.txabort);
- if (info->icount.rxshort)
- seq_printf(m, " rxshort:%d", info->icount.rxshort);
- if (info->icount.rxlong)
- seq_printf(m, " rxlong:%d", info->icount.rxlong);
- if (info->icount.rxover)
- seq_printf(m, " rxover:%d", info->icount.rxover);
- if (info->icount.rxcrc)
- seq_printf(m, " rxlong:%d", info->icount.rxcrc);
- } else {
- seq_printf(m, "\tASYNC tx:%d rx:%d",
- info->icount.tx, info->icount.rx);
- if (info->icount.frame)
- seq_printf(m, " fe:%d", info->icount.frame);
- if (info->icount.parity)
- seq_printf(m, " pe:%d", info->icount.parity);
- if (info->icount.brk)
- seq_printf(m, " brk:%d", info->icount.brk);
- if (info->icount.overrun)
- seq_printf(m, " oe:%d", info->icount.overrun);
- }
-
- /* Append serial signal status to end */
- seq_printf(m, " %s\n", stat_buf+1);
-
- seq_printf(m, "\ttxactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
- info->tx_active,info->bh_requested,info->bh_running,
- info->pending_bh);
-}
-
-/* Called to print information about devices
- */
-static int synclinkmp_proc_show(struct seq_file *m, void *v)
-{
- SLMP_INFO *info;
-
- seq_printf(m, "synclinkmp driver:%s\n", driver_version);
-
- info = synclinkmp_device_list;
- while( info ) {
- line_info(m, info);
- info = info->next_device;
- }
- return 0;
-}
-
-/* Return the count of bytes in transmit buffer
- */
-static int chars_in_buffer(struct tty_struct *tty)
-{
- SLMP_INFO *info = tty->driver_data;
-
- if (sanity_check(info, tty->name, "chars_in_buffer"))
- return 0;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):%s chars_in_buffer()=%d\n",
- __FILE__, __LINE__, info->device_name, info->tx_count);
-
- return info->tx_count;
-}
-
-/* Signal remote device to throttle send data (our receive data)
- */
-static void throttle(struct tty_struct * tty)
-{
- SLMP_INFO *info = tty->driver_data;
- unsigned long flags;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):%s throttle() entry\n",
- __FILE__,__LINE__, info->device_name );
-
- if (sanity_check(info, tty->name, "throttle"))
- return;
-
- if (I_IXOFF(tty))
- send_xchar(tty, STOP_CHAR(tty));
-
- if (C_CRTSCTS(tty)) {
- spin_lock_irqsave(&info->lock,flags);
- info->serial_signals &= ~SerialSignal_RTS;
- set_signals(info);
- spin_unlock_irqrestore(&info->lock,flags);
- }
-}
-
-/* Signal remote device to stop throttling send data (our receive data)
- */
-static void unthrottle(struct tty_struct * tty)
-{
- SLMP_INFO *info = tty->driver_data;
- unsigned long flags;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):%s unthrottle() entry\n",
- __FILE__,__LINE__, info->device_name );
-
- if (sanity_check(info, tty->name, "unthrottle"))
- return;
-
- if (I_IXOFF(tty)) {
- if (info->x_char)
- info->x_char = 0;
- else
- send_xchar(tty, START_CHAR(tty));
- }
-
- if (C_CRTSCTS(tty)) {
- spin_lock_irqsave(&info->lock,flags);
- info->serial_signals |= SerialSignal_RTS;
- set_signals(info);
- spin_unlock_irqrestore(&info->lock,flags);
- }
-}
-
-/* set or clear transmit break condition
- * break_state -1=set break condition, 0=clear
- */
-static int set_break(struct tty_struct *tty, int break_state)
-{
- unsigned char RegValue;
- SLMP_INFO * info = tty->driver_data;
- unsigned long flags;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):%s set_break(%d)\n",
- __FILE__,__LINE__, info->device_name, break_state);
-
- if (sanity_check(info, tty->name, "set_break"))
- return -EINVAL;
-
- spin_lock_irqsave(&info->lock,flags);
- RegValue = read_reg(info, CTL);
- if (break_state == -1)
- RegValue |= BIT3;
- else
- RegValue &= ~BIT3;
- write_reg(info, CTL, RegValue);
- spin_unlock_irqrestore(&info->lock,flags);
- return 0;
-}
-
-#if SYNCLINK_GENERIC_HDLC
-
-/**
- * hdlcdev_attach - called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
- * @dev: pointer to network device structure
- * @encoding: serial encoding setting
- * @parity: FCS setting
- *
- * Set encoding and frame check sequence (FCS) options.
- *
- * Return: 0 if success, otherwise error code
- */
-static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
- unsigned short parity)
-{
- SLMP_INFO *info = dev_to_port(dev);
- unsigned char new_encoding;
- unsigned short new_crctype;
-
- /* return error if TTY interface open */
- if (info->port.count)
- return -EBUSY;
-
- switch (encoding)
- {
- case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break;
- case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
- case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
- case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
- case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
- default: return -EINVAL;
- }
-
- switch (parity)
- {
- case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break;
- case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
- case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
- default: return -EINVAL;
- }
-
- info->params.encoding = new_encoding;
- info->params.crc_type = new_crctype;
-
- /* if network interface up, reprogram hardware */
- if (info->netcount)
- program_hw(info);
-
- return 0;
-}
-
-/**
- * hdlcdev_xmit - called by generic HDLC layer to send frame
- * @skb: socket buffer containing HDLC frame
- * @dev: pointer to network device structure
- */
-static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb,
- struct net_device *dev)
-{
- SLMP_INFO *info = dev_to_port(dev);
- unsigned long flags;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk(KERN_INFO "%s:hdlc_xmit(%s)\n",__FILE__,dev->name);
-
- /* stop sending until this frame completes */
- netif_stop_queue(dev);
-
- /* copy data to device buffers */
- info->tx_count = skb->len;
- tx_load_dma_buffer(info, skb->data, skb->len);
-
- /* update network statistics */
- dev->stats.tx_packets++;
- dev->stats.tx_bytes += skb->len;
-
- /* done with socket buffer, so free it */
- dev_kfree_skb(skb);
-
- /* save start time for transmit timeout detection */
- netif_trans_update(dev);
-
- /* start hardware transmitter if necessary */
- spin_lock_irqsave(&info->lock,flags);
- if (!info->tx_active)
- tx_start(info);
- spin_unlock_irqrestore(&info->lock,flags);
-
- return NETDEV_TX_OK;
-}
-
-/**
- * hdlcdev_open - called by network layer when interface enabled
- * @dev: pointer to network device structure
- *
- * Claim resources and initialize hardware.
- *
- * Return: 0 if success, otherwise error code
- */
-static int hdlcdev_open(struct net_device *dev)
-{
- SLMP_INFO *info = dev_to_port(dev);
- int rc;
- unsigned long flags;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name);
-
- /* generic HDLC layer open processing */
- rc = hdlc_open(dev);
- if (rc)
- return rc;
-
- /* arbitrate between network and tty opens */
- spin_lock_irqsave(&info->netlock, flags);
- if (info->port.count != 0 || info->netcount != 0) {
- printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name);
- spin_unlock_irqrestore(&info->netlock, flags);
- return -EBUSY;
- }
- info->netcount=1;
- spin_unlock_irqrestore(&info->netlock, flags);
-
- /* claim resources and init adapter */
- if ((rc = startup(info)) != 0) {
- spin_lock_irqsave(&info->netlock, flags);
- info->netcount=0;
- spin_unlock_irqrestore(&info->netlock, flags);
- return rc;
- }
-
- /* assert RTS and DTR, apply hardware settings */
- info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
- program_hw(info);
-
- /* enable network layer transmit */
- netif_trans_update(dev);
- netif_start_queue(dev);
-
- /* inform generic HDLC layer of current DCD status */
- spin_lock_irqsave(&info->lock, flags);
- get_signals(info);
- spin_unlock_irqrestore(&info->lock, flags);
- if (info->serial_signals & SerialSignal_DCD)
- netif_carrier_on(dev);
- else
- netif_carrier_off(dev);
- return 0;
-}
-
-/**
- * hdlcdev_close - called by network layer when interface is disabled
- * @dev: pointer to network device structure
- *
- * Shutdown hardware and release resources.
- *
- * Return: 0 if success, otherwise error code
- */
-static int hdlcdev_close(struct net_device *dev)
-{
- SLMP_INFO *info = dev_to_port(dev);
- unsigned long flags;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s:hdlcdev_close(%s)\n",__FILE__,dev->name);
-
- netif_stop_queue(dev);
-
- /* shutdown adapter and release resources */
- shutdown(info);
-
- hdlc_close(dev);
-
- spin_lock_irqsave(&info->netlock, flags);
- info->netcount=0;
- spin_unlock_irqrestore(&info->netlock, flags);
-
- return 0;
-}
-
-/**
- * hdlcdev_ioctl - called by network layer to process IOCTL call to network device
- * @dev: pointer to network device structure
- * @ifr: pointer to network interface request structure
- * @cmd: IOCTL command code
- *
- * Return: 0 if success, otherwise error code
- */
-static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-{
- const size_t size = sizeof(sync_serial_settings);
- sync_serial_settings new_line;
- sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
- SLMP_INFO *info = dev_to_port(dev);
- unsigned int flags;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name);
-
- /* return error if TTY interface open */
- if (info->port.count)
- return -EBUSY;
-
- if (cmd != SIOCWANDEV)
- return hdlc_ioctl(dev, ifr, cmd);
-
- switch(ifr->ifr_settings.type) {
- case IF_GET_IFACE: /* return current sync_serial_settings */
-
- ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
- if (ifr->ifr_settings.size < size) {
- ifr->ifr_settings.size = size; /* data size wanted */
- return -ENOBUFS;
- }
-
- flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
- HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
- HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
- HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
-
- memset(&new_line, 0, sizeof(new_line));
- switch (flags){
- case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
- case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break;
- case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break;
- case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
- default: new_line.clock_type = CLOCK_DEFAULT;
- }
-
- new_line.clock_rate = info->params.clock_speed;
- new_line.loopback = info->params.loopback ? 1:0;
-
- if (copy_to_user(line, &new_line, size))
- return -EFAULT;
- return 0;
-
- case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
-
- if(!capable(CAP_NET_ADMIN))
- return -EPERM;
- if (copy_from_user(&new_line, line, size))
- return -EFAULT;
-
- switch (new_line.clock_type)
- {
- case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
- case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
- case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break;
- case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break;
- case CLOCK_DEFAULT: flags = info->params.flags &
- (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
- HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
- HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
- HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break;
- default: return -EINVAL;
- }
-
- if (new_line.loopback != 0 && new_line.loopback != 1)
- return -EINVAL;
-
- info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
- HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
- HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
- HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
- info->params.flags |= flags;
-
- info->params.loopback = new_line.loopback;
-
- if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
- info->params.clock_speed = new_line.clock_rate;
- else
- info->params.clock_speed = 0;
-
- /* if network interface up, reprogram hardware */
- if (info->netcount)
- program_hw(info);
- return 0;
-
- default:
- return hdlc_ioctl(dev, ifr, cmd);
- }
-}
-
-/**
- * hdlcdev_tx_timeout - called by network layer when transmit timeout is detected
- * @dev: pointer to network device structure
- * @txqueue: unused
- */
-static void hdlcdev_tx_timeout(struct net_device *dev, unsigned int txqueue)
-{
- SLMP_INFO *info = dev_to_port(dev);
- unsigned long flags;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("hdlcdev_tx_timeout(%s)\n",dev->name);
-
- dev->stats.tx_errors++;
- dev->stats.tx_aborted_errors++;
-
- spin_lock_irqsave(&info->lock,flags);
- tx_stop(info);
- spin_unlock_irqrestore(&info->lock,flags);
-
- netif_wake_queue(dev);
-}
-
-/**
- * hdlcdev_tx_done - called by device driver when transmit completes
- * @info: pointer to device instance information
- *
- * Reenable network layer transmit if stopped.
- */
-static void hdlcdev_tx_done(SLMP_INFO *info)
-{
- if (netif_queue_stopped(info->netdev))
- netif_wake_queue(info->netdev);
-}
-
-/**
- * hdlcdev_rx - called by device driver when frame received
- * @info: pointer to device instance information
- * @buf: pointer to buffer contianing frame data
- * @size: count of data bytes in buf
- *
- * Pass frame to network layer.
- */
-static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size)
-{
- struct sk_buff *skb = dev_alloc_skb(size);
- struct net_device *dev = info->netdev;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("hdlcdev_rx(%s)\n",dev->name);
-
- if (skb == NULL) {
- printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n",
- dev->name);
- dev->stats.rx_dropped++;
- return;
- }
-
- skb_put_data(skb, buf, size);
-
- skb->protocol = hdlc_type_trans(skb, dev);
-
- dev->stats.rx_packets++;
- dev->stats.rx_bytes += size;
-
- netif_rx(skb);
-}
-
-static const struct net_device_ops hdlcdev_ops = {
- .ndo_open = hdlcdev_open,
- .ndo_stop = hdlcdev_close,
- .ndo_start_xmit = hdlc_start_xmit,
- .ndo_do_ioctl = hdlcdev_ioctl,
- .ndo_tx_timeout = hdlcdev_tx_timeout,
-};
-
-/**
- * hdlcdev_init - called by device driver when adding device instance
- * @info: pointer to device instance information
- *
- * Do generic HDLC initialization.
- *
- * Return: 0 if success, otherwise error code
- */
-static int hdlcdev_init(SLMP_INFO *info)
-{
- int rc;
- struct net_device *dev;
- hdlc_device *hdlc;
-
- /* allocate and initialize network and HDLC layer objects */
-
- dev = alloc_hdlcdev(info);
- if (!dev) {
- printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__);
- return -ENOMEM;
- }
-
- /* for network layer reporting purposes only */
- dev->mem_start = info->phys_sca_base;
- dev->mem_end = info->phys_sca_base + SCA_BASE_SIZE - 1;
- dev->irq = info->irq_level;
-
- /* network layer callbacks and settings */
- dev->netdev_ops = &hdlcdev_ops;
- dev->watchdog_timeo = 10 * HZ;
- dev->tx_queue_len = 50;
-
- /* generic HDLC layer callbacks and settings */
- hdlc = dev_to_hdlc(dev);
- hdlc->attach = hdlcdev_attach;
- hdlc->xmit = hdlcdev_xmit;
-
- /* register objects with HDLC layer */
- rc = register_hdlc_device(dev);
- if (rc) {
- printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__);
- free_netdev(dev);
- return rc;
- }
-
- info->netdev = dev;
- return 0;
-}
-
-/**
- * hdlcdev_exit - called by device driver when removing device instance
- * @info: pointer to device instance information
- *
- * Do generic HDLC cleanup.
- */
-static void hdlcdev_exit(SLMP_INFO *info)
-{
- unregister_hdlc_device(info->netdev);
- free_netdev(info->netdev);
- info->netdev = NULL;
-}
-
-#endif /* CONFIG_HDLC */
-
-
-/* Return next bottom half action to perform.
- * Return Value: BH action code or 0 if nothing to do.
- */
-static int bh_action(SLMP_INFO *info)
-{
- unsigned long flags;
- int rc = 0;
-
- spin_lock_irqsave(&info->lock,flags);
-
- if (info->pending_bh & BH_RECEIVE) {
- info->pending_bh &= ~BH_RECEIVE;
- rc = BH_RECEIVE;
- } else if (info->pending_bh & BH_TRANSMIT) {
- info->pending_bh &= ~BH_TRANSMIT;
- rc = BH_TRANSMIT;
- } else if (info->pending_bh & BH_STATUS) {
- info->pending_bh &= ~BH_STATUS;
- rc = BH_STATUS;
- }
-
- if (!rc) {
- /* Mark BH routine as complete */
- info->bh_running = false;
- info->bh_requested = false;
- }
-
- spin_unlock_irqrestore(&info->lock,flags);
-
- return rc;
-}
-
-/* Perform bottom half processing of work items queued by ISR.
- */
-static void bh_handler(struct work_struct *work)
-{
- SLMP_INFO *info = container_of(work, SLMP_INFO, task);
- int action;
-
- if ( debug_level >= DEBUG_LEVEL_BH )
- printk( "%s(%d):%s bh_handler() entry\n",
- __FILE__,__LINE__,info->device_name);
-
- info->bh_running = true;
-
- while((action = bh_action(info)) != 0) {
-
- /* Process work item */
- if ( debug_level >= DEBUG_LEVEL_BH )
- printk( "%s(%d):%s bh_handler() work item action=%d\n",
- __FILE__,__LINE__,info->device_name, action);
-
- switch (action) {
-
- case BH_RECEIVE:
- bh_receive(info);
- break;
- case BH_TRANSMIT:
- bh_transmit(info);
- break;
- case BH_STATUS:
- bh_status(info);
- break;
- default:
- /* unknown work item ID */
- printk("%s(%d):%s Unknown work item ID=%08X!\n",
- __FILE__,__LINE__,info->device_name,action);
- break;
- }
- }
-
- if ( debug_level >= DEBUG_LEVEL_BH )
- printk( "%s(%d):%s bh_handler() exit\n",
- __FILE__,__LINE__,info->device_name);
-}
-
-static void bh_receive(SLMP_INFO *info)
-{
- if ( debug_level >= DEBUG_LEVEL_BH )
- printk( "%s(%d):%s bh_receive()\n",
- __FILE__,__LINE__,info->device_name);
-
- while( rx_get_frame(info) );
-}
-
-static void bh_transmit(SLMP_INFO *info)
-{
- struct tty_struct *tty = info->port.tty;
-
- if ( debug_level >= DEBUG_LEVEL_BH )
- printk( "%s(%d):%s bh_transmit() entry\n",
- __FILE__,__LINE__,info->device_name);
-
- if (tty)
- tty_wakeup(tty);
-}
-
-static void bh_status(SLMP_INFO *info)
-{
- if ( debug_level >= DEBUG_LEVEL_BH )
- printk( "%s(%d):%s bh_status() entry\n",
- __FILE__,__LINE__,info->device_name);
-
- info->ri_chkcount = 0;
- info->dsr_chkcount = 0;
- info->dcd_chkcount = 0;
- info->cts_chkcount = 0;
-}
-
-static void isr_timer(SLMP_INFO * info)
-{
- unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0;
-
- /* IER2<7..4> = timer<3..0> interrupt enables (0=disabled) */
- write_reg(info, IER2, 0);
-
- /* TMCS, Timer Control/Status Register
- *
- * 07 CMF, Compare match flag (read only) 1=match
- * 06 ECMI, CMF Interrupt Enable: 0=disabled
- * 05 Reserved, must be 0
- * 04 TME, Timer Enable
- * 03..00 Reserved, must be 0
- *
- * 0000 0000
- */
- write_reg(info, (unsigned char)(timer + TMCS), 0);
-
- info->irq_occurred = true;
-
- if ( debug_level >= DEBUG_LEVEL_ISR )
- printk("%s(%d):%s isr_timer()\n",
- __FILE__,__LINE__,info->device_name);
-}
-
-static void isr_rxint(SLMP_INFO * info)
-{
- struct tty_struct *tty = info->port.tty;
- struct mgsl_icount *icount = &info->icount;
- unsigned char status = read_reg(info, SR1) & info->ie1_value & (FLGD + IDLD + CDCD + BRKD);
- unsigned char status2 = read_reg(info, SR2) & info->ie2_value & OVRN;
-
- /* clear status bits */
- if (status)
- write_reg(info, SR1, status);
-
- if (status2)
- write_reg(info, SR2, status2);
-
- if ( debug_level >= DEBUG_LEVEL_ISR )
- printk("%s(%d):%s isr_rxint status=%02X %02x\n",
- __FILE__,__LINE__,info->device_name,status,status2);
-
- if (info->params.mode == MGSL_MODE_ASYNC) {
- if (status & BRKD) {
- icount->brk++;
-
- /* process break detection if tty control
- * is not set to ignore it
- */
- if (!(status & info->ignore_status_mask1)) {
- if (info->read_status_mask1 & BRKD) {
- tty_insert_flip_char(&info->port, 0, TTY_BREAK);
- if (tty && (info->port.flags & ASYNC_SAK))
- do_SAK(tty);
- }
- }
- }
- }
- else {
- if (status & (FLGD|IDLD)) {
- if (status & FLGD)
- info->icount.exithunt++;
- else if (status & IDLD)
- info->icount.rxidle++;
- wake_up_interruptible(&info->event_wait_q);
- }
- }
-
- if (status & CDCD) {
- /* simulate a common modem status change interrupt
- * for our handler
- */
- get_signals( info );
- isr_io_pin(info,
- MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD));
- }
-}
-
-/*
- * handle async rx data interrupts
- */
-static void isr_rxrdy(SLMP_INFO * info)
-{
- u16 status;
- unsigned char DataByte;
- struct mgsl_icount *icount = &info->icount;
-
- if ( debug_level >= DEBUG_LEVEL_ISR )
- printk("%s(%d):%s isr_rxrdy\n",
- __FILE__,__LINE__,info->device_name);
-
- while((status = read_reg(info,CST0)) & BIT0)
- {
- int flag = 0;
- bool over = false;
- DataByte = read_reg(info,TRB);
-
- icount->rx++;
-
- if ( status & (PE + FRME + OVRN) ) {
- printk("%s(%d):%s rxerr=%04X\n",
- __FILE__,__LINE__,info->device_name,status);
-
- /* update error statistics */
- if (status & PE)
- icount->parity++;
- else if (status & FRME)
- icount->frame++;
- else if (status & OVRN)
- icount->overrun++;
-
- /* discard char if tty control flags say so */
- if (status & info->ignore_status_mask2)
- continue;
-
- status &= info->read_status_mask2;
-
- if (status & PE)
- flag = TTY_PARITY;
- else if (status & FRME)
- flag = TTY_FRAME;
- if (status & OVRN) {
- /* Overrun is special, since it's
- * reported immediately, and doesn't
- * affect the current character
- */
- over = true;
- }
- } /* end of if (error) */
-
- tty_insert_flip_char(&info->port, DataByte, flag);
- if (over)
- tty_insert_flip_char(&info->port, 0, TTY_OVERRUN);
- }
-
- if ( debug_level >= DEBUG_LEVEL_ISR ) {
- printk("%s(%d):%s rx=%d brk=%d parity=%d frame=%d overrun=%d\n",
- __FILE__,__LINE__,info->device_name,
- icount->rx,icount->brk,icount->parity,
- icount->frame,icount->overrun);
- }
-
- tty_flip_buffer_push(&info->port);
-}
-
-static void isr_txeom(SLMP_INFO * info, unsigned char status)
-{
- if ( debug_level >= DEBUG_LEVEL_ISR )
- printk("%s(%d):%s isr_txeom status=%02x\n",
- __FILE__,__LINE__,info->device_name,status);
-
- write_reg(info, TXDMA + DIR, 0x00); /* disable Tx DMA IRQs */
- write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */
- write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
-
- if (status & UDRN) {
- write_reg(info, CMD, TXRESET);
- write_reg(info, CMD, TXENABLE);
- } else
- write_reg(info, CMD, TXBUFCLR);
-
- /* disable and clear tx interrupts */
- info->ie0_value &= ~TXRDYE;
- info->ie1_value &= ~(IDLE + UDRN);
- write_reg16(info, IE0, (unsigned short)((info->ie1_value << 8) + info->ie0_value));
- write_reg(info, SR1, (unsigned char)(UDRN + IDLE));
-
- if ( info->tx_active ) {
- if (info->params.mode != MGSL_MODE_ASYNC) {
- if (status & UDRN)
- info->icount.txunder++;
- else if (status & IDLE)
- info->icount.txok++;
- }
-
- info->tx_active = false;
- info->tx_count = info->tx_put = info->tx_get = 0;
-
- del_timer(&info->tx_timer);
-
- if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done ) {
- info->serial_signals &= ~SerialSignal_RTS;
- info->drop_rts_on_tx_done = false;
- set_signals(info);
- }
-
-#if SYNCLINK_GENERIC_HDLC
- if (info->netcount)
- hdlcdev_tx_done(info);
- else
-#endif
- {
- if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) {
- tx_stop(info);
- return;
- }
- info->pending_bh |= BH_TRANSMIT;
- }
- }
-}
-
-
-/*
- * handle tx status interrupts
- */
-static void isr_txint(SLMP_INFO * info)
-{
- unsigned char status = read_reg(info, SR1) & info->ie1_value & (UDRN + IDLE + CCTS);
-
- /* clear status bits */
- write_reg(info, SR1, status);
-
- if ( debug_level >= DEBUG_LEVEL_ISR )
- printk("%s(%d):%s isr_txint status=%02x\n",
- __FILE__,__LINE__,info->device_name,status);
-
- if (status & (UDRN + IDLE))
- isr_txeom(info, status);
-
- if (status & CCTS) {
- /* simulate a common modem status change interrupt
- * for our handler
- */
- get_signals( info );
- isr_io_pin(info,
- MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS));
-
- }
-}
-
-/*
- * handle async tx data interrupts
- */
-static void isr_txrdy(SLMP_INFO * info)
-{
- if ( debug_level >= DEBUG_LEVEL_ISR )
- printk("%s(%d):%s isr_txrdy() tx_count=%d\n",
- __FILE__,__LINE__,info->device_name,info->tx_count);
-
- if (info->params.mode != MGSL_MODE_ASYNC) {
- /* disable TXRDY IRQ, enable IDLE IRQ */
- info->ie0_value &= ~TXRDYE;
- info->ie1_value |= IDLE;
- write_reg16(info, IE0, (unsigned short)((info->ie1_value << 8) + info->ie0_value));
- return;
- }
-
- if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) {
- tx_stop(info);
- return;
- }
-
- if ( info->tx_count )
- tx_load_fifo( info );
- else {
- info->tx_active = false;
- info->ie0_value &= ~TXRDYE;
- write_reg(info, IE0, info->ie0_value);
- }
-
- if (info->tx_count < WAKEUP_CHARS)
- info->pending_bh |= BH_TRANSMIT;
-}
-
-static void isr_rxdmaok(SLMP_INFO * info)
-{
- /* BIT7 = EOT (end of transfer)
- * BIT6 = EOM (end of message/frame)
- */
- unsigned char status = read_reg(info,RXDMA + DSR) & 0xc0;
-
- /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
- write_reg(info, RXDMA + DSR, (unsigned char)(status | 1));
-
- if ( debug_level >= DEBUG_LEVEL_ISR )
- printk("%s(%d):%s isr_rxdmaok(), status=%02x\n",
- __FILE__,__LINE__,info->device_name,status);
-
- info->pending_bh |= BH_RECEIVE;
-}
-
-static void isr_rxdmaerror(SLMP_INFO * info)
-{
- /* BIT5 = BOF (buffer overflow)
- * BIT4 = COF (counter overflow)
- */
- unsigned char status = read_reg(info,RXDMA + DSR) & 0x30;
-
- /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
- write_reg(info, RXDMA + DSR, (unsigned char)(status | 1));
-
- if ( debug_level >= DEBUG_LEVEL_ISR )
- printk("%s(%d):%s isr_rxdmaerror(), status=%02x\n",
- __FILE__,__LINE__,info->device_name,status);
-
- info->rx_overflow = true;
- info->pending_bh |= BH_RECEIVE;
-}
-
-static void isr_txdmaok(SLMP_INFO * info)
-{
- unsigned char status_reg1 = read_reg(info, SR1);
-
- write_reg(info, TXDMA + DIR, 0x00); /* disable Tx DMA IRQs */
- write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */
- write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
-
- if ( debug_level >= DEBUG_LEVEL_ISR )
- printk("%s(%d):%s isr_txdmaok(), status=%02x\n",
- __FILE__,__LINE__,info->device_name,status_reg1);
-
- /* program TXRDY as FIFO empty flag, enable TXRDY IRQ */
- write_reg16(info, TRC0, 0);
- info->ie0_value |= TXRDYE;
- write_reg(info, IE0, info->ie0_value);
-}
-
-static void isr_txdmaerror(SLMP_INFO * info)
-{
- /* BIT5 = BOF (buffer overflow)
- * BIT4 = COF (counter overflow)
- */
- unsigned char status = read_reg(info,TXDMA + DSR) & 0x30;
-
- /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
- write_reg(info, TXDMA + DSR, (unsigned char)(status | 1));
-
- if ( debug_level >= DEBUG_LEVEL_ISR )
- printk("%s(%d):%s isr_txdmaerror(), status=%02x\n",
- __FILE__,__LINE__,info->device_name,status);
-}
-
-/* handle input serial signal changes
- */
-static void isr_io_pin( SLMP_INFO *info, u16 status )
-{
- struct mgsl_icount *icount;
-
- if ( debug_level >= DEBUG_LEVEL_ISR )
- printk("%s(%d):isr_io_pin status=%04X\n",
- __FILE__,__LINE__,status);
-
- if (status & (MISCSTATUS_CTS_LATCHED | MISCSTATUS_DCD_LATCHED |
- MISCSTATUS_DSR_LATCHED | MISCSTATUS_RI_LATCHED) ) {
- icount = &info->icount;
- /* update input line counters */
- if (status & MISCSTATUS_RI_LATCHED) {
- icount->rng++;
- if ( status & SerialSignal_RI )
- info->input_signal_events.ri_up++;
- else
- info->input_signal_events.ri_down++;
- }
- if (status & MISCSTATUS_DSR_LATCHED) {
- icount->dsr++;
- if ( status & SerialSignal_DSR )
- info->input_signal_events.dsr_up++;
- else
- info->input_signal_events.dsr_down++;
- }
- if (status & MISCSTATUS_DCD_LATCHED) {
- if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) {
- info->ie1_value &= ~CDCD;
- write_reg(info, IE1, info->ie1_value);
- }
- icount->dcd++;
- if (status & SerialSignal_DCD) {
- info->input_signal_events.dcd_up++;
- } else
- info->input_signal_events.dcd_down++;
-#if SYNCLINK_GENERIC_HDLC
- if (info->netcount) {
- if (status & SerialSignal_DCD)
- netif_carrier_on(info->netdev);
- else
- netif_carrier_off(info->netdev);
- }
-#endif
- }
- if (status & MISCSTATUS_CTS_LATCHED)
- {
- if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) {
- info->ie1_value &= ~CCTS;
- write_reg(info, IE1, info->ie1_value);
- }
- icount->cts++;
- if ( status & SerialSignal_CTS )
- info->input_signal_events.cts_up++;
- else
- info->input_signal_events.cts_down++;
- }
- wake_up_interruptible(&info->status_event_wait_q);
- wake_up_interruptible(&info->event_wait_q);
-
- if (tty_port_check_carrier(&info->port) &&
- (status & MISCSTATUS_DCD_LATCHED) ) {
- if ( debug_level >= DEBUG_LEVEL_ISR )
- printk("%s CD now %s...", info->device_name,
- (status & SerialSignal_DCD) ? "on" : "off");
- if (status & SerialSignal_DCD)
- wake_up_interruptible(&info->port.open_wait);
- else {
- if ( debug_level >= DEBUG_LEVEL_ISR )
- printk("doing serial hangup...");
- if (info->port.tty)
- tty_hangup(info->port.tty);
- }
- }
-
- if (tty_port_cts_enabled(&info->port) &&
- (status & MISCSTATUS_CTS_LATCHED) ) {
- if ( info->port.tty ) {
- if (info->port.tty->hw_stopped) {
- if (status & SerialSignal_CTS) {
- if ( debug_level >= DEBUG_LEVEL_ISR )
- printk("CTS tx start...");
- info->port.tty->hw_stopped = 0;
- tx_start(info);
- info->pending_bh |= BH_TRANSMIT;
- return;
- }
- } else {
- if (!(status & SerialSignal_CTS)) {
- if ( debug_level >= DEBUG_LEVEL_ISR )
- printk("CTS tx stop...");
- info->port.tty->hw_stopped = 1;
- tx_stop(info);
- }
- }
- }
- }
- }
-
- info->pending_bh |= BH_STATUS;
-}
-
-/* Interrupt service routine entry point.
- *
- * Arguments:
- * irq interrupt number that caused interrupt
- * dev_id device ID supplied during interrupt registration
- * regs interrupted processor context
- */
-static irqreturn_t synclinkmp_interrupt(int dummy, void *dev_id)
-{
- SLMP_INFO *info = dev_id;
- unsigned char status, status0, status1=0;
- unsigned char dmastatus, dmastatus0, dmastatus1=0;
- unsigned char timerstatus0, timerstatus1=0;
- unsigned char shift;
- unsigned int i;
- unsigned short tmp;
-
- if ( debug_level >= DEBUG_LEVEL_ISR )
- printk(KERN_DEBUG "%s(%d): synclinkmp_interrupt(%d)entry.\n",
- __FILE__, __LINE__, info->irq_level);
-
- spin_lock(&info->lock);
-
- for(;;) {
-
- /* get status for SCA0 (ports 0-1) */
- tmp = read_reg16(info, ISR0); /* get ISR0 and ISR1 in one read */
- status0 = (unsigned char)tmp;
- dmastatus0 = (unsigned char)(tmp>>8);
- timerstatus0 = read_reg(info, ISR2);
-
- if ( debug_level >= DEBUG_LEVEL_ISR )
- printk(KERN_DEBUG "%s(%d):%s status0=%02x, dmastatus0=%02x, timerstatus0=%02x\n",
- __FILE__, __LINE__, info->device_name,
- status0, dmastatus0, timerstatus0);
-
- if (info->port_count == 4) {
- /* get status for SCA1 (ports 2-3) */
- tmp = read_reg16(info->port_array[2], ISR0);
- status1 = (unsigned char)tmp;
- dmastatus1 = (unsigned char)(tmp>>8);
- timerstatus1 = read_reg(info->port_array[2], ISR2);
-
- if ( debug_level >= DEBUG_LEVEL_ISR )
- printk("%s(%d):%s status1=%02x, dmastatus1=%02x, timerstatus1=%02x\n",
- __FILE__,__LINE__,info->device_name,
- status1,dmastatus1,timerstatus1);
- }
-
- if (!status0 && !dmastatus0 && !timerstatus0 &&
- !status1 && !dmastatus1 && !timerstatus1)
- break;
-
- for(i=0; i < info->port_count ; i++) {
- if (info->port_array[i] == NULL)
- continue;
- if (i < 2) {
- status = status0;
- dmastatus = dmastatus0;
- } else {
- status = status1;
- dmastatus = dmastatus1;
- }
-
- shift = i & 1 ? 4 :0;
-
- if (status & BIT0 << shift)
- isr_rxrdy(info->port_array[i]);
- if (status & BIT1 << shift)
- isr_txrdy(info->port_array[i]);
- if (status & BIT2 << shift)
- isr_rxint(info->port_array[i]);
- if (status & BIT3 << shift)
- isr_txint(info->port_array[i]);
-
- if (dmastatus & BIT0 << shift)
- isr_rxdmaerror(info->port_array[i]);
- if (dmastatus & BIT1 << shift)
- isr_rxdmaok(info->port_array[i]);
- if (dmastatus & BIT2 << shift)
- isr_txdmaerror(info->port_array[i]);
- if (dmastatus & BIT3 << shift)
- isr_txdmaok(info->port_array[i]);
- }
-
- if (timerstatus0 & (BIT5 | BIT4))
- isr_timer(info->port_array[0]);
- if (timerstatus0 & (BIT7 | BIT6))
- isr_timer(info->port_array[1]);
- if (timerstatus1 & (BIT5 | BIT4))
- isr_timer(info->port_array[2]);
- if (timerstatus1 & (BIT7 | BIT6))
- isr_timer(info->port_array[3]);
- }
-
- for(i=0; i < info->port_count ; i++) {
- SLMP_INFO * port = info->port_array[i];
-
- /* Request bottom half processing if there's something
- * for it to do and the bh is not already running.
- *
- * Note: startup adapter diags require interrupts.
- * do not request bottom half processing if the
- * device is not open in a normal mode.
- */
- if ( port && (port->port.count || port->netcount) &&
- port->pending_bh && !port->bh_running &&
- !port->bh_requested ) {
- if ( debug_level >= DEBUG_LEVEL_ISR )
- printk("%s(%d):%s queueing bh task.\n",
- __FILE__,__LINE__,port->device_name);
- schedule_work(&port->task);
- port->bh_requested = true;
- }
- }
-
- spin_unlock(&info->lock);
-
- if ( debug_level >= DEBUG_LEVEL_ISR )
- printk(KERN_DEBUG "%s(%d):synclinkmp_interrupt(%d)exit.\n",
- __FILE__, __LINE__, info->irq_level);
- return IRQ_HANDLED;
-}
-
-/* Initialize and start device.
- */
-static int startup(SLMP_INFO * info)
-{
- if ( debug_level >= DEBUG_LEVEL_INFO )
- printk("%s(%d):%s tx_releaseup()\n",__FILE__,__LINE__,info->device_name);
-
- if (tty_port_initialized(&info->port))
- return 0;
-
- if (!info->tx_buf) {
- info->tx_buf = kmalloc(info->max_frame_size, GFP_KERNEL);
- if (!info->tx_buf) {
- printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n",
- __FILE__,__LINE__,info->device_name);
- return -ENOMEM;
- }
- }
-
- info->pending_bh = 0;
-
- memset(&info->icount, 0, sizeof(info->icount));
-
- /* program hardware for current parameters */
- reset_port(info);
-
- change_params(info);
-
- mod_timer(&info->status_timer, jiffies + msecs_to_jiffies(10));
-
- if (info->port.tty)
- clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
-
- tty_port_set_initialized(&info->port, 1);
-
- return 0;
-}
-
-/* Called by close() and hangup() to shutdown hardware
- */
-static void shutdown(SLMP_INFO * info)
-{
- unsigned long flags;
-
- if (!tty_port_initialized(&info->port))
- return;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):%s synclinkmp_shutdown()\n",
- __FILE__,__LINE__, info->device_name );
-
- /* clear status wait queue because status changes */
- /* can't happen after shutting down the hardware */
- wake_up_interruptible(&info->status_event_wait_q);
- wake_up_interruptible(&info->event_wait_q);
-
- del_timer(&info->tx_timer);
- del_timer(&info->status_timer);
-
- kfree(info->tx_buf);
- info->tx_buf = NULL;
-
- spin_lock_irqsave(&info->lock,flags);
-
- reset_port(info);
-
- if (!info->port.tty || info->port.tty->termios.c_cflag & HUPCL) {
- info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
- set_signals(info);
- }
-
- spin_unlock_irqrestore(&info->lock,flags);
-
- if (info->port.tty)
- set_bit(TTY_IO_ERROR, &info->port.tty->flags);
-
- tty_port_set_initialized(&info->port, 0);
-}
-
-static void program_hw(SLMP_INFO *info)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&info->lock,flags);
-
- rx_stop(info);
- tx_stop(info);
-
- info->tx_count = info->tx_put = info->tx_get = 0;
-
- if (info->params.mode == MGSL_MODE_HDLC || info->netcount)
- hdlc_mode(info);
- else
- async_mode(info);
-
- set_signals(info);
-
- info->dcd_chkcount = 0;
- info->cts_chkcount = 0;
- info->ri_chkcount = 0;
- info->dsr_chkcount = 0;
-
- info->ie1_value |= (CDCD|CCTS);
- write_reg(info, IE1, info->ie1_value);
-
- get_signals(info);
-
- if (info->netcount || (info->port.tty && info->port.tty->termios.c_cflag & CREAD) )
- rx_start(info);
-
- spin_unlock_irqrestore(&info->lock,flags);
-}
-
-/* Reconfigure adapter based on new parameters
- */
-static void change_params(SLMP_INFO *info)
-{
- unsigned cflag;
- int bits_per_char;
-
- if (!info->port.tty)
- return;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):%s change_params()\n",
- __FILE__,__LINE__, info->device_name );
-
- cflag = info->port.tty->termios.c_cflag;
-
- /* if B0 rate (hangup) specified then negate RTS and DTR */
- /* otherwise assert RTS and DTR */
- if (cflag & CBAUD)
- info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
- else
- info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
-
- /* byte size and parity */
-
- switch (cflag & CSIZE) {
- case CS5: info->params.data_bits = 5; break;
- case CS6: info->params.data_bits = 6; break;
- case CS7: info->params.data_bits = 7; break;
- case CS8: info->params.data_bits = 8; break;
- /* Never happens, but GCC is too dumb to figure it out */
- default: info->params.data_bits = 7; break;
- }
-
- if (cflag & CSTOPB)
- info->params.stop_bits = 2;
- else
- info->params.stop_bits = 1;
-
- info->params.parity = ASYNC_PARITY_NONE;
- if (cflag & PARENB) {
- if (cflag & PARODD)
- info->params.parity = ASYNC_PARITY_ODD;
- else
- info->params.parity = ASYNC_PARITY_EVEN;
-#ifdef CMSPAR
- if (cflag & CMSPAR)
- info->params.parity = ASYNC_PARITY_SPACE;
-#endif
- }
-
- /* calculate number of jiffies to transmit a full
- * FIFO (32 bytes) at specified data rate
- */
- bits_per_char = info->params.data_bits +
- info->params.stop_bits + 1;
-
- /* if port data rate is set to 460800 or less then
- * allow tty settings to override, otherwise keep the
- * current data rate.
- */
- if (info->params.data_rate <= 460800) {
- info->params.data_rate = tty_get_baud_rate(info->port.tty);
- }
-
- if ( info->params.data_rate ) {
- info->timeout = (32*HZ*bits_per_char) /
- info->params.data_rate;
- }
- info->timeout += HZ/50; /* Add .02 seconds of slop */
-
- tty_port_set_cts_flow(&info->port, cflag & CRTSCTS);
- tty_port_set_check_carrier(&info->port, ~cflag & CLOCAL);
-
- /* process tty input control flags */
-
- info->read_status_mask2 = OVRN;
- if (I_INPCK(info->port.tty))
- info->read_status_mask2 |= PE | FRME;
- if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
- info->read_status_mask1 |= BRKD;
- if (I_IGNPAR(info->port.tty))
- info->ignore_status_mask2 |= PE | FRME;
- if (I_IGNBRK(info->port.tty)) {
- info->ignore_status_mask1 |= BRKD;
- /* If ignoring parity and break indicators, ignore
- * overruns too. (For real raw support).
- */
- if (I_IGNPAR(info->port.tty))
- info->ignore_status_mask2 |= OVRN;
- }
-
- program_hw(info);
-}
-
-static int get_stats(SLMP_INFO * info, struct mgsl_icount __user *user_icount)
-{
- int err;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):%s get_params()\n",
- __FILE__,__LINE__, info->device_name);
-
- if (!user_icount) {
- memset(&info->icount, 0, sizeof(info->icount));
- } else {
- mutex_lock(&info->port.mutex);
- COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount));
- mutex_unlock(&info->port.mutex);
- if (err)
- return -EFAULT;
- }
-
- return 0;
-}
-
-static int get_params(SLMP_INFO * info, MGSL_PARAMS __user *user_params)
-{
- int err;
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):%s get_params()\n",
- __FILE__,__LINE__, info->device_name);
-
- mutex_lock(&info->port.mutex);
- COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS));
- mutex_unlock(&info->port.mutex);
- if (err) {
- if ( debug_level >= DEBUG_LEVEL_INFO )
- printk( "%s(%d):%s get_params() user buffer copy failed\n",
- __FILE__,__LINE__,info->device_name);
- return -EFAULT;
- }
-
- return 0;
-}
-
-static int set_params(SLMP_INFO * info, MGSL_PARAMS __user *new_params)
-{
- unsigned long flags;
- MGSL_PARAMS tmp_params;
- int err;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):%s set_params\n",
- __FILE__,__LINE__,info->device_name );
- COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS));
- if (err) {
- if ( debug_level >= DEBUG_LEVEL_INFO )
- printk( "%s(%d):%s set_params() user buffer copy failed\n",
- __FILE__,__LINE__,info->device_name);
- return -EFAULT;
- }
-
- mutex_lock(&info->port.mutex);
- spin_lock_irqsave(&info->lock,flags);
- memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
- spin_unlock_irqrestore(&info->lock,flags);
-
- change_params(info);
- mutex_unlock(&info->port.mutex);
-
- return 0;
-}
-
-static int get_txidle(SLMP_INFO * info, int __user *idle_mode)
-{
- int err;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):%s get_txidle()=%d\n",
- __FILE__,__LINE__, info->device_name, info->idle_mode);
-
- COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int));
- if (err) {
- if ( debug_level >= DEBUG_LEVEL_INFO )
- printk( "%s(%d):%s get_txidle() user buffer copy failed\n",
- __FILE__,__LINE__,info->device_name);
- return -EFAULT;
- }
-
- return 0;
-}
-
-static int set_txidle(SLMP_INFO * info, int idle_mode)
-{
- unsigned long flags;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):%s set_txidle(%d)\n",
- __FILE__,__LINE__,info->device_name, idle_mode );
-
- spin_lock_irqsave(&info->lock,flags);
- info->idle_mode = idle_mode;
- tx_set_idle( info );
- spin_unlock_irqrestore(&info->lock,flags);
- return 0;
-}
-
-static int tx_enable(SLMP_INFO * info, int enable)
-{
- unsigned long flags;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):%s tx_enable(%d)\n",
- __FILE__,__LINE__,info->device_name, enable);
-
- spin_lock_irqsave(&info->lock,flags);
- if ( enable ) {
- if ( !info->tx_enabled ) {
- tx_start(info);
- }
- } else {
- if ( info->tx_enabled )
- tx_stop(info);
- }
- spin_unlock_irqrestore(&info->lock,flags);
- return 0;
-}
-
-/* abort send HDLC frame
- */
-static int tx_abort(SLMP_INFO * info)
-{
- unsigned long flags;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):%s tx_abort()\n",
- __FILE__,__LINE__,info->device_name);
-
- spin_lock_irqsave(&info->lock,flags);
- if ( info->tx_active && info->params.mode == MGSL_MODE_HDLC ) {
- info->ie1_value &= ~UDRN;
- info->ie1_value |= IDLE;
- write_reg(info, IE1, info->ie1_value); /* disable tx status interrupts */
- write_reg(info, SR1, (unsigned char)(IDLE + UDRN)); /* clear pending */
-
- write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */
- write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
-
- write_reg(info, CMD, TXABORT);
- }
- spin_unlock_irqrestore(&info->lock,flags);
- return 0;
-}
-
-static int rx_enable(SLMP_INFO * info, int enable)
-{
- unsigned long flags;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):%s rx_enable(%d)\n",
- __FILE__,__LINE__,info->device_name,enable);
-
- spin_lock_irqsave(&info->lock,flags);
- if ( enable ) {
- if ( !info->rx_enabled )
- rx_start(info);
- } else {
- if ( info->rx_enabled )
- rx_stop(info);
- }
- spin_unlock_irqrestore(&info->lock,flags);
- return 0;
-}
-
-/* wait for specified event to occur
- */
-static int wait_mgsl_event(SLMP_INFO * info, int __user *mask_ptr)
-{
- unsigned long flags;
- int s;
- int rc=0;
- struct mgsl_icount cprev, cnow;
- int events;
- int mask;
- struct _input_signal_events oldsigs, newsigs;
- DECLARE_WAITQUEUE(wait, current);
-
- COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int));
- if (rc) {
- return -EFAULT;
- }
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):%s wait_mgsl_event(%d)\n",
- __FILE__,__LINE__,info->device_name,mask);
-
- spin_lock_irqsave(&info->lock,flags);
-
- /* return immediately if state matches requested events */
- get_signals(info);
- s = info->serial_signals;
-
- events = mask &
- ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
- ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
- ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
- ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) );
- if (events) {
- spin_unlock_irqrestore(&info->lock,flags);
- goto exit;
- }
-
- /* save current irq counts */
- cprev = info->icount;
- oldsigs = info->input_signal_events;
-
- /* enable hunt and idle irqs if needed */
- if (mask & (MgslEvent_ExitHuntMode+MgslEvent_IdleReceived)) {
- unsigned char oldval = info->ie1_value;
- unsigned char newval = oldval +
- (mask & MgslEvent_ExitHuntMode ? FLGD:0) +
- (mask & MgslEvent_IdleReceived ? IDLD:0);
- if ( oldval != newval ) {
- info->ie1_value = newval;
- write_reg(info, IE1, info->ie1_value);
- }
- }
-
- set_current_state(TASK_INTERRUPTIBLE);
- add_wait_queue(&info->event_wait_q, &wait);
-
- spin_unlock_irqrestore(&info->lock,flags);
-
- for(;;) {
- schedule();
- if (signal_pending(current)) {
- rc = -ERESTARTSYS;
- break;
- }
-
- /* get current irq counts */
- spin_lock_irqsave(&info->lock,flags);
- cnow = info->icount;
- newsigs = info->input_signal_events;
- set_current_state(TASK_INTERRUPTIBLE);
- spin_unlock_irqrestore(&info->lock,flags);
-
- /* if no change, wait aborted for some reason */
- if (newsigs.dsr_up == oldsigs.dsr_up &&
- newsigs.dsr_down == oldsigs.dsr_down &&
- newsigs.dcd_up == oldsigs.dcd_up &&
- newsigs.dcd_down == oldsigs.dcd_down &&
- newsigs.cts_up == oldsigs.cts_up &&
- newsigs.cts_down == oldsigs.cts_down &&
- newsigs.ri_up == oldsigs.ri_up &&
- newsigs.ri_down == oldsigs.ri_down &&
- cnow.exithunt == cprev.exithunt &&
- cnow.rxidle == cprev.rxidle) {
- rc = -EIO;
- break;
- }
-
- events = mask &
- ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) +
- (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
- (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) +
- (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
- (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) +
- (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
- (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) +
- (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) +
- (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) +
- (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) );
- if (events)
- break;
-
- cprev = cnow;
- oldsigs = newsigs;
- }
-
- remove_wait_queue(&info->event_wait_q, &wait);
- set_current_state(TASK_RUNNING);
-
-
- if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
- spin_lock_irqsave(&info->lock,flags);
- if (!waitqueue_active(&info->event_wait_q)) {
- /* disable enable exit hunt mode/idle rcvd IRQs */
- info->ie1_value &= ~(FLGD|IDLD);
- write_reg(info, IE1, info->ie1_value);
- }
- spin_unlock_irqrestore(&info->lock,flags);
- }
-exit:
- if ( rc == 0 )
- PUT_USER(rc, events, mask_ptr);
-
- return rc;
-}
-
-static int modem_input_wait(SLMP_INFO *info,int arg)
-{
- unsigned long flags;
- int rc;
- struct mgsl_icount cprev, cnow;
- DECLARE_WAITQUEUE(wait, current);
-
- /* save current irq counts */
- spin_lock_irqsave(&info->lock,flags);
- cprev = info->icount;
- add_wait_queue(&info->status_event_wait_q, &wait);
- set_current_state(TASK_INTERRUPTIBLE);
- spin_unlock_irqrestore(&info->lock,flags);
-
- for(;;) {
- schedule();
- if (signal_pending(current)) {
- rc = -ERESTARTSYS;
- break;
- }
-
- /* get new irq counts */
- spin_lock_irqsave(&info->lock,flags);
- cnow = info->icount;
- set_current_state(TASK_INTERRUPTIBLE);
- spin_unlock_irqrestore(&info->lock,flags);
-
- /* if no change, wait aborted for some reason */
- if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
- cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
- rc = -EIO;
- break;
- }
-
- /* check for change in caller specified modem input */
- if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
- (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
- (arg & TIOCM_CD && cnow.dcd != cprev.dcd) ||
- (arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
- rc = 0;
- break;
- }
-
- cprev = cnow;
- }
- remove_wait_queue(&info->status_event_wait_q, &wait);
- set_current_state(TASK_RUNNING);
- return rc;
-}
-
-/* return the state of the serial control and status signals
- */
-static int tiocmget(struct tty_struct *tty)
-{
- SLMP_INFO *info = tty->driver_data;
- unsigned int result;
- unsigned long flags;
-
- spin_lock_irqsave(&info->lock,flags);
- get_signals(info);
- spin_unlock_irqrestore(&info->lock,flags);
-
- result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS : 0) |
- ((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR : 0) |
- ((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR : 0) |
- ((info->serial_signals & SerialSignal_RI) ? TIOCM_RNG : 0) |
- ((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR : 0) |
- ((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS : 0);
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):%s tiocmget() value=%08X\n",
- __FILE__,__LINE__, info->device_name, result );
- return result;
-}
-
-/* set modem control signals (DTR/RTS)
- */
-static int tiocmset(struct tty_struct *tty,
- unsigned int set, unsigned int clear)
-{
- SLMP_INFO *info = tty->driver_data;
- unsigned long flags;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):%s tiocmset(%x,%x)\n",
- __FILE__,__LINE__,info->device_name, set, clear);
-
- if (set & TIOCM_RTS)
- info->serial_signals |= SerialSignal_RTS;
- if (set & TIOCM_DTR)
- info->serial_signals |= SerialSignal_DTR;
- if (clear & TIOCM_RTS)
- info->serial_signals &= ~SerialSignal_RTS;
- if (clear & TIOCM_DTR)
- info->serial_signals &= ~SerialSignal_DTR;
-
- spin_lock_irqsave(&info->lock,flags);
- set_signals(info);
- spin_unlock_irqrestore(&info->lock,flags);
-
- return 0;
-}
-
-static int carrier_raised(struct tty_port *port)
-{
- SLMP_INFO *info = container_of(port, SLMP_INFO, port);
- unsigned long flags;
-
- spin_lock_irqsave(&info->lock,flags);
- get_signals(info);
- spin_unlock_irqrestore(&info->lock,flags);
-
- return (info->serial_signals & SerialSignal_DCD) ? 1 : 0;
-}
-
-static void dtr_rts(struct tty_port *port, int on)
-{
- SLMP_INFO *info = container_of(port, SLMP_INFO, port);
- unsigned long flags;
-
- spin_lock_irqsave(&info->lock,flags);
- if (on)
- info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
- else
- info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
- set_signals(info);
- spin_unlock_irqrestore(&info->lock,flags);
-}
-
-/* Block the current process until the specified port is ready to open.
- */
-static int block_til_ready(struct tty_struct *tty, struct file *filp,
- SLMP_INFO *info)
-{
- DECLARE_WAITQUEUE(wait, current);
- int retval;
- bool do_clocal = false;
- unsigned long flags;
- int cd;
- struct tty_port *port = &info->port;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):%s block_til_ready()\n",
- __FILE__,__LINE__, tty->driver->name );
-
- if (filp->f_flags & O_NONBLOCK || tty_io_error(tty)) {
- /* nonblock mode is set or port is not enabled */
- /* just verify that callout device is not active */
- tty_port_set_active(port, 1);
- return 0;
- }
-
- if (C_CLOCAL(tty))
- do_clocal = true;
-
- /* Wait for carrier detect and the line to become
- * free (i.e., not in use by the callout). While we are in
- * this loop, port->count is dropped by one, so that
- * close() knows when to free things. We restore it upon
- * exit, either normal or abnormal.
- */
-
- retval = 0;
- add_wait_queue(&port->open_wait, &wait);
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):%s block_til_ready() before block, count=%d\n",
- __FILE__,__LINE__, tty->driver->name, port->count );
-
- spin_lock_irqsave(&info->lock, flags);
- port->count--;
- spin_unlock_irqrestore(&info->lock, flags);
- port->blocked_open++;
-
- while (1) {
- if (C_BAUD(tty) && tty_port_initialized(port))
- tty_port_raise_dtr_rts(port);
-
- set_current_state(TASK_INTERRUPTIBLE);
-
- if (tty_hung_up_p(filp) || !tty_port_initialized(port)) {
- retval = (port->flags & ASYNC_HUP_NOTIFY) ?
- -EAGAIN : -ERESTARTSYS;
- break;
- }
-
- cd = tty_port_carrier_raised(port);
- if (do_clocal || cd)
- break;
-
- if (signal_pending(current)) {
- retval = -ERESTARTSYS;
- break;
- }
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):%s block_til_ready() count=%d\n",
- __FILE__,__LINE__, tty->driver->name, port->count );
-
- tty_unlock(tty);
- schedule();
- tty_lock(tty);
- }
-
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&port->open_wait, &wait);
- if (!tty_hung_up_p(filp))
- port->count++;
- port->blocked_open--;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):%s block_til_ready() after, count=%d\n",
- __FILE__,__LINE__, tty->driver->name, port->count );
-
- if (!retval)
- tty_port_set_active(port, 1);
-
- return retval;
-}
-
-static int alloc_dma_bufs(SLMP_INFO *info)
-{
- unsigned short BuffersPerFrame;
- unsigned short BufferCount;
-
- // Force allocation to start at 64K boundary for each port.
- // This is necessary because *all* buffer descriptors for a port
- // *must* be in the same 64K block. All descriptors on a port
- // share a common 'base' address (upper 8 bits of 24 bits) programmed
- // into the CBP register.
- info->port_array[0]->last_mem_alloc = (SCA_MEM_SIZE/4) * info->port_num;
-
- /* Calculate the number of DMA buffers necessary to hold the */
- /* largest allowable frame size. Note: If the max frame size is */
- /* not an even multiple of the DMA buffer size then we need to */
- /* round the buffer count per frame up one. */
-
- BuffersPerFrame = (unsigned short)(info->max_frame_size/SCABUFSIZE);
- if ( info->max_frame_size % SCABUFSIZE )
- BuffersPerFrame++;
-
- /* calculate total number of data buffers (SCABUFSIZE) possible
- * in one ports memory (SCA_MEM_SIZE/4) after allocating memory
- * for the descriptor list (BUFFERLISTSIZE).
- */
- BufferCount = (SCA_MEM_SIZE/4 - BUFFERLISTSIZE)/SCABUFSIZE;
-
- /* limit number of buffers to maximum amount of descriptors */
- if (BufferCount > BUFFERLISTSIZE/sizeof(SCADESC))
- BufferCount = BUFFERLISTSIZE/sizeof(SCADESC);
-
- /* use enough buffers to transmit one max size frame */
- info->tx_buf_count = BuffersPerFrame + 1;
-
- /* never use more than half the available buffers for transmit */
- if (info->tx_buf_count > (BufferCount/2))
- info->tx_buf_count = BufferCount/2;
-
- if (info->tx_buf_count > SCAMAXDESC)
- info->tx_buf_count = SCAMAXDESC;
-
- /* use remaining buffers for receive */
- info->rx_buf_count = BufferCount - info->tx_buf_count;
-
- if (info->rx_buf_count > SCAMAXDESC)
- info->rx_buf_count = SCAMAXDESC;
-
- if ( debug_level >= DEBUG_LEVEL_INFO )
- printk("%s(%d):%s Allocating %d TX and %d RX DMA buffers.\n",
- __FILE__,__LINE__, info->device_name,
- info->tx_buf_count,info->rx_buf_count);
-
- if ( alloc_buf_list( info ) < 0 ||
- alloc_frame_bufs(info,
- info->rx_buf_list,
- info->rx_buf_list_ex,
- info->rx_buf_count) < 0 ||
- alloc_frame_bufs(info,
- info->tx_buf_list,
- info->tx_buf_list_ex,
- info->tx_buf_count) < 0 ||
- alloc_tmp_rx_buf(info) < 0 ) {
- printk("%s(%d):%s Can't allocate DMA buffer memory\n",
- __FILE__,__LINE__, info->device_name);
- return -ENOMEM;
- }
-
- rx_reset_buffers( info );
-
- return 0;
-}
-
-/* Allocate DMA buffers for the transmit and receive descriptor lists.
- */
-static int alloc_buf_list(SLMP_INFO *info)
-{
- unsigned int i;
-
- /* build list in adapter shared memory */
- info->buffer_list = info->memory_base + info->port_array[0]->last_mem_alloc;
- info->buffer_list_phys = info->port_array[0]->last_mem_alloc;
- info->port_array[0]->last_mem_alloc += BUFFERLISTSIZE;
-
- memset(info->buffer_list, 0, BUFFERLISTSIZE);
-
- /* Save virtual address pointers to the receive and */
- /* transmit buffer lists. (Receive 1st). These pointers will */
- /* be used by the processor to access the lists. */
- info->rx_buf_list = (SCADESC *)info->buffer_list;
-
- info->tx_buf_list = (SCADESC *)info->buffer_list;
- info->tx_buf_list += info->rx_buf_count;
-
- /* Build links for circular buffer entry lists (tx and rx)
- *
- * Note: links are physical addresses read by the SCA device
- * to determine the next buffer entry to use.
- */
-
- for ( i = 0; i < info->rx_buf_count; i++ ) {
- /* calculate and store physical address of this buffer entry */
- info->rx_buf_list_ex[i].phys_entry =
- info->buffer_list_phys + (i * SCABUFSIZE);
-
- /* calculate and store physical address of */
- /* next entry in cirular list of entries */
- info->rx_buf_list[i].next = info->buffer_list_phys;
- if ( i < info->rx_buf_count - 1 )
- info->rx_buf_list[i].next += (i + 1) * sizeof(SCADESC);
-
- info->rx_buf_list[i].length = SCABUFSIZE;
- }
-
- for ( i = 0; i < info->tx_buf_count; i++ ) {
- /* calculate and store physical address of this buffer entry */
- info->tx_buf_list_ex[i].phys_entry = info->buffer_list_phys +
- ((info->rx_buf_count + i) * sizeof(SCADESC));
-
- /* calculate and store physical address of */
- /* next entry in cirular list of entries */
-
- info->tx_buf_list[i].next = info->buffer_list_phys +
- info->rx_buf_count * sizeof(SCADESC);
-
- if ( i < info->tx_buf_count - 1 )
- info->tx_buf_list[i].next += (i + 1) * sizeof(SCADESC);
- }
-
- return 0;
-}
-
-/* Allocate the frame DMA buffers used by the specified buffer list.
- */
-static int alloc_frame_bufs(SLMP_INFO *info, SCADESC *buf_list,SCADESC_EX *buf_list_ex,int count)
-{
- int i;
- unsigned long phys_addr;
-
- for ( i = 0; i < count; i++ ) {
- buf_list_ex[i].virt_addr = info->memory_base + info->port_array[0]->last_mem_alloc;
- phys_addr = info->port_array[0]->last_mem_alloc;
- info->port_array[0]->last_mem_alloc += SCABUFSIZE;
-
- buf_list[i].buf_ptr = (unsigned short)phys_addr;
- buf_list[i].buf_base = (unsigned char)(phys_addr >> 16);
- }
-
- return 0;
-}
-
-static void free_dma_bufs(SLMP_INFO *info)
-{
- info->buffer_list = NULL;
- info->rx_buf_list = NULL;
- info->tx_buf_list = NULL;
-}
-
-/* allocate buffer large enough to hold max_frame_size.
- * This buffer is used to pass an assembled frame to the line discipline.
- */
-static int alloc_tmp_rx_buf(SLMP_INFO *info)
-{
- info->tmp_rx_buf = kmalloc(info->max_frame_size, GFP_KERNEL);
- if (info->tmp_rx_buf == NULL)
- return -ENOMEM;
- /* unused flag buffer to satisfy receive_buf calling interface */
- info->flag_buf = kzalloc(info->max_frame_size, GFP_KERNEL);
- if (!info->flag_buf) {
- kfree(info->tmp_rx_buf);
- info->tmp_rx_buf = NULL;
- return -ENOMEM;
- }
- return 0;
-}
-
-static void free_tmp_rx_buf(SLMP_INFO *info)
-{
- kfree(info->tmp_rx_buf);
- info->tmp_rx_buf = NULL;
- kfree(info->flag_buf);
- info->flag_buf = NULL;
-}
-
-static int claim_resources(SLMP_INFO *info)
-{
- if (request_mem_region(info->phys_memory_base,SCA_MEM_SIZE,"synclinkmp") == NULL) {
- printk( "%s(%d):%s mem addr conflict, Addr=%08X\n",
- __FILE__,__LINE__,info->device_name, info->phys_memory_base);
- info->init_error = DiagStatus_AddressConflict;
- goto errout;
- }
- else
- info->shared_mem_requested = true;
-
- if (request_mem_region(info->phys_lcr_base + info->lcr_offset,128,"synclinkmp") == NULL) {
- printk( "%s(%d):%s lcr mem addr conflict, Addr=%08X\n",
- __FILE__,__LINE__,info->device_name, info->phys_lcr_base);
- info->init_error = DiagStatus_AddressConflict;
- goto errout;
- }
- else
- info->lcr_mem_requested = true;
-
- if (request_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE,"synclinkmp") == NULL) {
- printk( "%s(%d):%s sca mem addr conflict, Addr=%08X\n",
- __FILE__,__LINE__,info->device_name, info->phys_sca_base);
- info->init_error = DiagStatus_AddressConflict;
- goto errout;
- }
- else
- info->sca_base_requested = true;
-
- if (request_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE,"synclinkmp") == NULL) {
- printk( "%s(%d):%s stat/ctrl mem addr conflict, Addr=%08X\n",
- __FILE__,__LINE__,info->device_name, info->phys_statctrl_base);
- info->init_error = DiagStatus_AddressConflict;
- goto errout;
- }
- else
- info->sca_statctrl_requested = true;
-
- info->memory_base = ioremap(info->phys_memory_base,
- SCA_MEM_SIZE);
- if (!info->memory_base) {
- printk( "%s(%d):%s Can't map shared memory, MemAddr=%08X\n",
- __FILE__,__LINE__,info->device_name, info->phys_memory_base );
- info->init_error = DiagStatus_CantAssignPciResources;
- goto errout;
- }
-
- info->lcr_base = ioremap(info->phys_lcr_base, PAGE_SIZE);
- if (!info->lcr_base) {
- printk( "%s(%d):%s Can't map LCR memory, MemAddr=%08X\n",
- __FILE__,__LINE__,info->device_name, info->phys_lcr_base );
- info->init_error = DiagStatus_CantAssignPciResources;
- goto errout;
- }
- info->lcr_base += info->lcr_offset;
-
- info->sca_base = ioremap(info->phys_sca_base, PAGE_SIZE);
- if (!info->sca_base) {
- printk( "%s(%d):%s Can't map SCA memory, MemAddr=%08X\n",
- __FILE__,__LINE__,info->device_name, info->phys_sca_base );
- info->init_error = DiagStatus_CantAssignPciResources;
- goto errout;
- }
- info->sca_base += info->sca_offset;
-
- info->statctrl_base = ioremap(info->phys_statctrl_base,
- PAGE_SIZE);
- if (!info->statctrl_base) {
- printk( "%s(%d):%s Can't map SCA Status/Control memory, MemAddr=%08X\n",
- __FILE__,__LINE__,info->device_name, info->phys_statctrl_base );
- info->init_error = DiagStatus_CantAssignPciResources;
- goto errout;
- }
- info->statctrl_base += info->statctrl_offset;
-
- if ( !memory_test(info) ) {
- printk( "%s(%d):Shared Memory Test failed for device %s MemAddr=%08X\n",
- __FILE__,__LINE__,info->device_name, info->phys_memory_base );
- info->init_error = DiagStatus_MemoryError;
- goto errout;
- }
-
- return 0;
-
-errout:
- release_resources( info );
- return -ENODEV;
-}
-
-static void release_resources(SLMP_INFO *info)
-{
- if ( debug_level >= DEBUG_LEVEL_INFO )
- printk( "%s(%d):%s release_resources() entry\n",
- __FILE__,__LINE__,info->device_name );
-
- if ( info->irq_requested ) {
- free_irq(info->irq_level, info);
- info->irq_requested = false;
- }
-
- if ( info->shared_mem_requested ) {
- release_mem_region(info->phys_memory_base,SCA_MEM_SIZE);
- info->shared_mem_requested = false;
- }
- if ( info->lcr_mem_requested ) {
- release_mem_region(info->phys_lcr_base + info->lcr_offset,128);
- info->lcr_mem_requested = false;
- }
- if ( info->sca_base_requested ) {
- release_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE);
- info->sca_base_requested = false;
- }
- if ( info->sca_statctrl_requested ) {
- release_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE);
- info->sca_statctrl_requested = false;
- }
-
- if (info->memory_base){
- iounmap(info->memory_base);
- info->memory_base = NULL;
- }
-
- if (info->sca_base) {
- iounmap(info->sca_base - info->sca_offset);
- info->sca_base=NULL;
- }
-
- if (info->statctrl_base) {
- iounmap(info->statctrl_base - info->statctrl_offset);
- info->statctrl_base=NULL;
- }
-
- if (info->lcr_base){
- iounmap(info->lcr_base - info->lcr_offset);
- info->lcr_base = NULL;
- }
-
- if ( debug_level >= DEBUG_LEVEL_INFO )
- printk( "%s(%d):%s release_resources() exit\n",
- __FILE__,__LINE__,info->device_name );
-}
-
-/* Add the specified device instance data structure to the
- * global linked list of devices and increment the device count.
- */
-static int add_device(SLMP_INFO *info)
-{
- info->next_device = NULL;
- info->line = synclinkmp_device_count;
- sprintf(info->device_name,"ttySLM%dp%d",info->adapter_num,info->port_num);
-
- if (info->line < MAX_DEVICES) {
- if (maxframe[info->line])
- info->max_frame_size = maxframe[info->line];
- }
-
- synclinkmp_device_count++;
-
- if ( !synclinkmp_device_list )
- synclinkmp_device_list = info;
- else {
- SLMP_INFO *current_dev = synclinkmp_device_list;
- while( current_dev->next_device )
- current_dev = current_dev->next_device;
- current_dev->next_device = info;
- }
-
- if ( info->max_frame_size < 4096 )
- info->max_frame_size = 4096;
- else if ( info->max_frame_size > 65535 )
- info->max_frame_size = 65535;
-
- printk( "SyncLink MultiPort %s: "
- "Mem=(%08x %08X %08x %08X) IRQ=%d MaxFrameSize=%u\n",
- info->device_name,
- info->phys_sca_base,
- info->phys_memory_base,
- info->phys_statctrl_base,
- info->phys_lcr_base,
- info->irq_level,
- info->max_frame_size );
-
-#if SYNCLINK_GENERIC_HDLC
- return hdlcdev_init(info);
-#else
- return 0;
-#endif
-}
-
-static const struct tty_port_operations port_ops = {
- .carrier_raised = carrier_raised,
- .dtr_rts = dtr_rts,
-};
-
-/* Allocate and initialize a device instance structure
- *
- * Return Value: pointer to SLMP_INFO if success, otherwise NULL
- */
-static SLMP_INFO *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev)
-{
- SLMP_INFO *info;
-
- info = kzalloc(sizeof(SLMP_INFO),
- GFP_KERNEL);
-
- if (!info) {
- printk("%s(%d) Error can't allocate device instance data for adapter %d, port %d\n",
- __FILE__,__LINE__, adapter_num, port_num);
- } else {
- tty_port_init(&info->port);
- info->port.ops = &port_ops;
- info->magic = MGSL_MAGIC;
- INIT_WORK(&info->task, bh_handler);
- info->max_frame_size = 4096;
- info->port.close_delay = 5*HZ/10;
- info->port.closing_wait = 30*HZ;
- init_waitqueue_head(&info->status_event_wait_q);
- init_waitqueue_head(&info->event_wait_q);
- spin_lock_init(&info->netlock);
- memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
- info->idle_mode = HDLC_TXIDLE_FLAGS;
- info->adapter_num = adapter_num;
- info->port_num = port_num;
-
- /* Copy configuration info to device instance data */
- info->irq_level = pdev->irq;
- info->phys_lcr_base = pci_resource_start(pdev,0);
- info->phys_sca_base = pci_resource_start(pdev,2);
- info->phys_memory_base = pci_resource_start(pdev,3);
- info->phys_statctrl_base = pci_resource_start(pdev,4);
-
- /* Because veremap only works on page boundaries we must map
- * a larger area than is actually implemented for the LCR
- * memory range. We map a full page starting at the page boundary.
- */
- info->lcr_offset = info->phys_lcr_base & (PAGE_SIZE-1);
- info->phys_lcr_base &= ~(PAGE_SIZE-1);
-
- info->sca_offset = info->phys_sca_base & (PAGE_SIZE-1);
- info->phys_sca_base &= ~(PAGE_SIZE-1);
-
- info->statctrl_offset = info->phys_statctrl_base & (PAGE_SIZE-1);
- info->phys_statctrl_base &= ~(PAGE_SIZE-1);
-
- info->bus_type = MGSL_BUS_TYPE_PCI;
- info->irq_flags = IRQF_SHARED;
-
- timer_setup(&info->tx_timer, tx_timeout, 0);
- timer_setup(&info->status_timer, status_timeout, 0);
-
- /* Store the PCI9050 misc control register value because a flaw
- * in the PCI9050 prevents LCR registers from being read if
- * BIOS assigns an LCR base address with bit 7 set.
- *
- * Only the misc control register is accessed for which only
- * write access is needed, so set an initial value and change
- * bits to the device instance data as we write the value
- * to the actual misc control register.
- */
- info->misc_ctrl_value = 0x087e4546;
-
- /* initial port state is unknown - if startup errors
- * occur, init_error will be set to indicate the
- * problem. Once the port is fully initialized,
- * this value will be set to 0 to indicate the
- * port is available.
- */
- info->init_error = -1;
- }
-
- return info;
-}
-
-static int device_init(int adapter_num, struct pci_dev *pdev)
-{
- SLMP_INFO *port_array[SCA_MAX_PORTS];
- int port, rc;
-
- /* allocate device instances for up to SCA_MAX_PORTS devices */
- for ( port = 0; port < SCA_MAX_PORTS; ++port ) {
- port_array[port] = alloc_dev(adapter_num,port,pdev);
- if( port_array[port] == NULL ) {
- for (--port; port >= 0; --port) {
- tty_port_destroy(&port_array[port]->port);
- kfree(port_array[port]);
- }
- return -ENOMEM;
- }
- }
-
- /* give copy of port_array to all ports and add to device list */
- for ( port = 0; port < SCA_MAX_PORTS; ++port ) {
- memcpy(port_array[port]->port_array,port_array,sizeof(port_array));
- rc = add_device( port_array[port] );
- if (rc)
- goto err_add;
- spin_lock_init(&port_array[port]->lock);
- }
-
- /* Allocate and claim adapter resources */
- if ( !claim_resources(port_array[0]) ) {
-
- alloc_dma_bufs(port_array[0]);
-
- /* copy resource information from first port to others */
- for ( port = 1; port < SCA_MAX_PORTS; ++port ) {
- port_array[port]->lock = port_array[0]->lock;
- port_array[port]->irq_level = port_array[0]->irq_level;
- port_array[port]->memory_base = port_array[0]->memory_base;
- port_array[port]->sca_base = port_array[0]->sca_base;
- port_array[port]->statctrl_base = port_array[0]->statctrl_base;
- port_array[port]->lcr_base = port_array[0]->lcr_base;
- alloc_dma_bufs(port_array[port]);
- }
-
- rc = request_irq(port_array[0]->irq_level,
- synclinkmp_interrupt,
- port_array[0]->irq_flags,
- port_array[0]->device_name,
- port_array[0]);
- if ( rc ) {
- printk( "%s(%d):%s Can't request interrupt, IRQ=%d\n",
- __FILE__,__LINE__,
- port_array[0]->device_name,
- port_array[0]->irq_level );
- goto err_irq;
- }
- port_array[0]->irq_requested = true;
- adapter_test(port_array[0]);
- }
- return 0;
-err_irq:
- release_resources( port_array[0] );
-err_add:
- for ( port = 0; port < SCA_MAX_PORTS; ++port ) {
- tty_port_destroy(&port_array[port]->port);
- kfree(port_array[port]);
- }
- return rc;
-}
-
-static const struct tty_operations ops = {
- .install = install,
- .open = open,
- .close = close,
- .write = write,
- .put_char = put_char,
- .flush_chars = flush_chars,
- .write_room = write_room,
- .chars_in_buffer = chars_in_buffer,
- .flush_buffer = flush_buffer,
- .ioctl = ioctl,
- .throttle = throttle,
- .unthrottle = unthrottle,
- .send_xchar = send_xchar,
- .break_ctl = set_break,
- .wait_until_sent = wait_until_sent,
- .set_termios = set_termios,
- .stop = tx_hold,
- .start = tx_release,
- .hangup = hangup,
- .tiocmget = tiocmget,
- .tiocmset = tiocmset,
- .get_icount = get_icount,
- .proc_show = synclinkmp_proc_show,
-};
-
-
-static void synclinkmp_cleanup(void)
-{
- int rc;
- SLMP_INFO *info;
- SLMP_INFO *tmp;
-
- printk("Unloading %s %s\n", driver_name, driver_version);
-
- if (serial_driver) {
- rc = tty_unregister_driver(serial_driver);
- if (rc)
- printk("%s(%d) failed to unregister tty driver err=%d\n",
- __FILE__,__LINE__,rc);
- put_tty_driver(serial_driver);
- }
-
- /* reset devices */
- info = synclinkmp_device_list;
- while(info) {
- reset_port(info);
- info = info->next_device;
- }
-
- /* release devices */
- info = synclinkmp_device_list;
- while(info) {
-#if SYNCLINK_GENERIC_HDLC
- hdlcdev_exit(info);
-#endif
- free_dma_bufs(info);
- free_tmp_rx_buf(info);
- if ( info->port_num == 0 ) {
- if (info->sca_base)
- write_reg(info, LPR, 1); /* set low power mode */
- release_resources(info);
- }
- tmp = info;
- info = info->next_device;
- tty_port_destroy(&tmp->port);
- kfree(tmp);
- }
-
- pci_unregister_driver(&synclinkmp_pci_driver);
-}
-
-/* Driver initialization entry point.
- */
-
-static int __init synclinkmp_init(void)
-{
- int rc;
-
- if (break_on_load) {
- synclinkmp_get_text_ptr();
- BREAKPOINT();
- }
-
- printk("%s %s\n", driver_name, driver_version);
-
- if ((rc = pci_register_driver(&synclinkmp_pci_driver)) < 0) {
- printk("%s:failed to register PCI driver, error=%d\n",__FILE__,rc);
- return rc;
- }
-
- serial_driver = alloc_tty_driver(128);
- if (!serial_driver) {
- rc = -ENOMEM;
- goto error;
- }
-
- /* Initialize the tty_driver structure */
-
- serial_driver->driver_name = "synclinkmp";
- serial_driver->name = "ttySLM";
- serial_driver->major = ttymajor;
- serial_driver->minor_start = 64;
- serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
- serial_driver->subtype = SERIAL_TYPE_NORMAL;
- serial_driver->init_termios = tty_std_termios;
- serial_driver->init_termios.c_cflag =
- B9600 | CS8 | CREAD | HUPCL | CLOCAL;
- serial_driver->init_termios.c_ispeed = 9600;
- serial_driver->init_termios.c_ospeed = 9600;
- serial_driver->flags = TTY_DRIVER_REAL_RAW;
- tty_set_operations(serial_driver, &ops);
- if ((rc = tty_register_driver(serial_driver)) < 0) {
- printk("%s(%d):Couldn't register serial driver\n",
- __FILE__,__LINE__);
- put_tty_driver(serial_driver);
- serial_driver = NULL;
- goto error;
- }
-
- printk("%s %s, tty major#%d\n",
- driver_name, driver_version,
- serial_driver->major);
-
- return 0;
-
-error:
- synclinkmp_cleanup();
- return rc;
-}
-
-static void __exit synclinkmp_exit(void)
-{
- synclinkmp_cleanup();
-}
-
-module_init(synclinkmp_init);
-module_exit(synclinkmp_exit);
-
-/* Set the port for internal loopback mode.
- * The TxCLK and RxCLK signals are generated from the BRG and
- * the TxD is looped back to the RxD internally.
- */
-static void enable_loopback(SLMP_INFO *info, int enable)
-{
- if (enable) {
- /* MD2 (Mode Register 2)
- * 01..00 CNCT<1..0> Channel Connection 11=Local Loopback
- */
- write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) | (BIT1 + BIT0)));
-
- /* degate external TxC clock source */
- info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
- write_control_reg(info);
-
- /* RXS/TXS (Rx/Tx clock source)
- * 07 Reserved, must be 0
- * 06..04 Clock Source, 100=BRG
- * 03..00 Clock Divisor, 0000=1
- */
- write_reg(info, RXS, 0x40);
- write_reg(info, TXS, 0x40);
-
- } else {
- /* MD2 (Mode Register 2)
- * 01..00 CNCT<1..0> Channel connection, 0=normal
- */
- write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) & ~(BIT1 + BIT0)));
-
- /* RXS/TXS (Rx/Tx clock source)
- * 07 Reserved, must be 0
- * 06..04 Clock Source, 000=RxC/TxC Pin
- * 03..00 Clock Divisor, 0000=1
- */
- write_reg(info, RXS, 0x00);
- write_reg(info, TXS, 0x00);
- }
-
- /* set LinkSpeed if available, otherwise default to 2Mbps */
- if (info->params.clock_speed)
- set_rate(info, info->params.clock_speed);
- else
- set_rate(info, 3686400);
-}
-
-/* Set the baud rate register to the desired speed
- *
- * data_rate data rate of clock in bits per second
- * A data rate of 0 disables the AUX clock.
- */
-static void set_rate( SLMP_INFO *info, u32 data_rate )
-{
- u32 TMCValue;
- unsigned char BRValue;
- u32 Divisor=0;
-
- /* fBRG = fCLK/(TMC * 2^BR)
- */
- if (data_rate != 0) {
- Divisor = 14745600/data_rate;
- if (!Divisor)
- Divisor = 1;
-
- TMCValue = Divisor;
-
- BRValue = 0;
- if (TMCValue != 1 && TMCValue != 2) {
- /* BRValue of 0 provides 50/50 duty cycle *only* when
- * TMCValue is 1 or 2. BRValue of 1 to 9 always provides
- * 50/50 duty cycle.
- */
- BRValue = 1;
- TMCValue >>= 1;
- }
-
- /* while TMCValue is too big for TMC register, divide
- * by 2 and increment BR exponent.
- */
- for(; TMCValue > 256 && BRValue < 10; BRValue++)
- TMCValue >>= 1;
-
- write_reg(info, TXS,
- (unsigned char)((read_reg(info, TXS) & 0xf0) | BRValue));
- write_reg(info, RXS,
- (unsigned char)((read_reg(info, RXS) & 0xf0) | BRValue));
- write_reg(info, TMC, (unsigned char)TMCValue);
- }
- else {
- write_reg(info, TXS,0);
- write_reg(info, RXS,0);
- write_reg(info, TMC, 0);
- }
-}
-
-/* Disable receiver
- */
-static void rx_stop(SLMP_INFO *info)
-{
- if (debug_level >= DEBUG_LEVEL_ISR)
- printk("%s(%d):%s rx_stop()\n",
- __FILE__,__LINE__, info->device_name );
-
- write_reg(info, CMD, RXRESET);
-
- info->ie0_value &= ~RXRDYE;
- write_reg(info, IE0, info->ie0_value); /* disable Rx data interrupts */
-
- write_reg(info, RXDMA + DSR, 0); /* disable Rx DMA */
- write_reg(info, RXDMA + DCMD, SWABORT); /* reset/init Rx DMA */
- write_reg(info, RXDMA + DIR, 0); /* disable Rx DMA interrupts */
-
- info->rx_enabled = false;
- info->rx_overflow = false;
-}
-
-/* enable the receiver
- */
-static void rx_start(SLMP_INFO *info)
-{
- int i;
-
- if (debug_level >= DEBUG_LEVEL_ISR)
- printk("%s(%d):%s rx_start()\n",
- __FILE__,__LINE__, info->device_name );
-
- write_reg(info, CMD, RXRESET);
-
- if ( info->params.mode == MGSL_MODE_HDLC ) {
- /* HDLC, disabe IRQ on rxdata */
- info->ie0_value &= ~RXRDYE;
- write_reg(info, IE0, info->ie0_value);
-
- /* Reset all Rx DMA buffers and program rx dma */
- write_reg(info, RXDMA + DSR, 0); /* disable Rx DMA */
- write_reg(info, RXDMA + DCMD, SWABORT); /* reset/init Rx DMA */
-
- for (i = 0; i < info->rx_buf_count; i++) {
- info->rx_buf_list[i].status = 0xff;
-
- // throttle to 4 shared memory writes at a time to prevent
- // hogging local bus (keep latency time for DMA requests low).
- if (!(i % 4))
- read_status_reg(info);
- }
- info->current_rx_buf = 0;
-
- /* set current/1st descriptor address */
- write_reg16(info, RXDMA + CDA,
- info->rx_buf_list_ex[0].phys_entry);
-
- /* set new last rx descriptor address */
- write_reg16(info, RXDMA + EDA,
- info->rx_buf_list_ex[info->rx_buf_count - 1].phys_entry);
-
- /* set buffer length (shared by all rx dma data buffers) */
- write_reg16(info, RXDMA + BFL, SCABUFSIZE);
-
- write_reg(info, RXDMA + DIR, 0x60); /* enable Rx DMA interrupts (EOM/BOF) */
- write_reg(info, RXDMA + DSR, 0xf2); /* clear Rx DMA IRQs, enable Rx DMA */
- } else {
- /* async, enable IRQ on rxdata */
- info->ie0_value |= RXRDYE;
- write_reg(info, IE0, info->ie0_value);
- }
-
- write_reg(info, CMD, RXENABLE);
-
- info->rx_overflow = false;
- info->rx_enabled = true;
-}
-
-/* Enable the transmitter and send a transmit frame if
- * one is loaded in the DMA buffers.
- */
-static void tx_start(SLMP_INFO *info)
-{
- if (debug_level >= DEBUG_LEVEL_ISR)
- printk("%s(%d):%s tx_start() tx_count=%d\n",
- __FILE__,__LINE__, info->device_name,info->tx_count );
-
- if (!info->tx_enabled ) {
- write_reg(info, CMD, TXRESET);
- write_reg(info, CMD, TXENABLE);
- info->tx_enabled = true;
- }
-
- if ( info->tx_count ) {
-
- /* If auto RTS enabled and RTS is inactive, then assert */
- /* RTS and set a flag indicating that the driver should */
- /* negate RTS when the transmission completes. */
-
- info->drop_rts_on_tx_done = false;
-
- if (info->params.mode != MGSL_MODE_ASYNC) {
-
- if ( info->params.flags & HDLC_FLAG_AUTO_RTS ) {
- get_signals( info );
- if ( !(info->serial_signals & SerialSignal_RTS) ) {
- info->serial_signals |= SerialSignal_RTS;
- set_signals( info );
- info->drop_rts_on_tx_done = true;
- }
- }
-
- write_reg16(info, TRC0,
- (unsigned short)(((tx_negate_fifo_level-1)<<8) + tx_active_fifo_level));
-
- write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */
- write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
-
- /* set TX CDA (current descriptor address) */
- write_reg16(info, TXDMA + CDA,
- info->tx_buf_list_ex[0].phys_entry);
-
- /* set TX EDA (last descriptor address) */
- write_reg16(info, TXDMA + EDA,
- info->tx_buf_list_ex[info->last_tx_buf].phys_entry);
-
- /* enable underrun IRQ */
- info->ie1_value &= ~IDLE;
- info->ie1_value |= UDRN;
- write_reg(info, IE1, info->ie1_value);
- write_reg(info, SR1, (unsigned char)(IDLE + UDRN));
-
- write_reg(info, TXDMA + DIR, 0x40); /* enable Tx DMA interrupts (EOM) */
- write_reg(info, TXDMA + DSR, 0xf2); /* clear Tx DMA IRQs, enable Tx DMA */
-
- mod_timer(&info->tx_timer, jiffies +
- msecs_to_jiffies(5000));
- }
- else {
- tx_load_fifo(info);
- /* async, enable IRQ on txdata */
- info->ie0_value |= TXRDYE;
- write_reg(info, IE0, info->ie0_value);
- }
-
- info->tx_active = true;
- }
-}
-
-/* stop the transmitter and DMA
- */
-static void tx_stop( SLMP_INFO *info )
-{
- if (debug_level >= DEBUG_LEVEL_ISR)
- printk("%s(%d):%s tx_stop()\n",
- __FILE__,__LINE__, info->device_name );
-
- del_timer(&info->tx_timer);
-
- write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */
- write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
-
- write_reg(info, CMD, TXRESET);
-
- info->ie1_value &= ~(UDRN + IDLE);
- write_reg(info, IE1, info->ie1_value); /* disable tx status interrupts */
- write_reg(info, SR1, (unsigned char)(IDLE + UDRN)); /* clear pending */
-
- info->ie0_value &= ~TXRDYE;
- write_reg(info, IE0, info->ie0_value); /* disable tx data interrupts */
-
- info->tx_enabled = false;
- info->tx_active = false;
-}
-
-/* Fill the transmit FIFO until the FIFO is full or
- * there is no more data to load.
- */
-static void tx_load_fifo(SLMP_INFO *info)
-{
- u8 TwoBytes[2];
-
- /* do nothing is now tx data available and no XON/XOFF pending */
-
- if ( !info->tx_count && !info->x_char )
- return;
-
- /* load the Transmit FIFO until FIFOs full or all data sent */
-
- while( info->tx_count && (read_reg(info,SR0) & BIT1) ) {
-
- /* there is more space in the transmit FIFO and */
- /* there is more data in transmit buffer */
-
- if ( (info->tx_count > 1) && !info->x_char ) {
- /* write 16-bits */
- TwoBytes[0] = info->tx_buf[info->tx_get++];
- if (info->tx_get >= info->max_frame_size)
- info->tx_get -= info->max_frame_size;
- TwoBytes[1] = info->tx_buf[info->tx_get++];
- if (info->tx_get >= info->max_frame_size)
- info->tx_get -= info->max_frame_size;
-
- write_reg16(info, TRB, *((u16 *)TwoBytes));
-
- info->tx_count -= 2;
- info->icount.tx += 2;
- } else {
- /* only 1 byte left to transmit or 1 FIFO slot left */
-
- if (info->x_char) {
- /* transmit pending high priority char */
- write_reg(info, TRB, info->x_char);
- info->x_char = 0;
- } else {
- write_reg(info, TRB, info->tx_buf[info->tx_get++]);
- if (info->tx_get >= info->max_frame_size)
- info->tx_get -= info->max_frame_size;
- info->tx_count--;
- }
- info->icount.tx++;
- }
- }
-}
-
-/* Reset a port to a known state
- */
-static void reset_port(SLMP_INFO *info)
-{
- if (info->sca_base) {
-
- tx_stop(info);
- rx_stop(info);
-
- info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
- set_signals(info);
-
- /* disable all port interrupts */
- info->ie0_value = 0;
- info->ie1_value = 0;
- info->ie2_value = 0;
- write_reg(info, IE0, info->ie0_value);
- write_reg(info, IE1, info->ie1_value);
- write_reg(info, IE2, info->ie2_value);
-
- write_reg(info, CMD, CHRESET);
- }
-}
-
-/* Reset all the ports to a known state.
- */
-static void reset_adapter(SLMP_INFO *info)
-{
- int i;
-
- for ( i=0; i < SCA_MAX_PORTS; ++i) {
- if (info->port_array[i])
- reset_port(info->port_array[i]);
- }
-}
-
-/* Program port for asynchronous communications.
- */
-static void async_mode(SLMP_INFO *info)
-{
-
- unsigned char RegValue;
-
- tx_stop(info);
- rx_stop(info);
-
- /* MD0, Mode Register 0
- *
- * 07..05 PRCTL<2..0>, Protocol Mode, 000=async
- * 04 AUTO, Auto-enable (RTS/CTS/DCD)
- * 03 Reserved, must be 0
- * 02 CRCCC, CRC Calculation, 0=disabled
- * 01..00 STOP<1..0> Stop bits (00=1,10=2)
- *
- * 0000 0000
- */
- RegValue = 0x00;
- if (info->params.stop_bits != 1)
- RegValue |= BIT1;
- write_reg(info, MD0, RegValue);
-
- /* MD1, Mode Register 1
- *
- * 07..06 BRATE<1..0>, bit rate, 00=1/1 01=1/16 10=1/32 11=1/64
- * 05..04 TXCHR<1..0>, tx char size, 00=8 bits,01=7,10=6,11=5
- * 03..02 RXCHR<1..0>, rx char size
- * 01..00 PMPM<1..0>, Parity mode, 00=none 10=even 11=odd
- *
- * 0100 0000
- */
- RegValue = 0x40;
- switch (info->params.data_bits) {
- case 7: RegValue |= BIT4 + BIT2; break;
- case 6: RegValue |= BIT5 + BIT3; break;
- case 5: RegValue |= BIT5 + BIT4 + BIT3 + BIT2; break;
- }
- if (info->params.parity != ASYNC_PARITY_NONE) {
- RegValue |= BIT1;
- if (info->params.parity == ASYNC_PARITY_ODD)
- RegValue |= BIT0;
- }
- write_reg(info, MD1, RegValue);
-
- /* MD2, Mode Register 2
- *
- * 07..02 Reserved, must be 0
- * 01..00 CNCT<1..0> Channel connection, 00=normal 11=local loopback
- *
- * 0000 0000
- */
- RegValue = 0x00;
- if (info->params.loopback)
- RegValue |= (BIT1 + BIT0);
- write_reg(info, MD2, RegValue);
-
- /* RXS, Receive clock source
- *
- * 07 Reserved, must be 0
- * 06..04 RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL
- * 03..00 RXBR<3..0>, rate divisor, 0000=1
- */
- RegValue=BIT6;
- write_reg(info, RXS, RegValue);
-
- /* TXS, Transmit clock source
- *
- * 07 Reserved, must be 0
- * 06..04 RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock
- * 03..00 RXBR<3..0>, rate divisor, 0000=1
- */
- RegValue=BIT6;
- write_reg(info, TXS, RegValue);
-
- /* Control Register
- *
- * 6,4,2,0 CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out
- */
- info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
- write_control_reg(info);
-
- tx_set_idle(info);
-
- /* RRC Receive Ready Control 0
- *
- * 07..05 Reserved, must be 0
- * 04..00 RRC<4..0> Rx FIFO trigger active 0x00 = 1 byte
- */
- write_reg(info, RRC, 0x00);
-
- /* TRC0 Transmit Ready Control 0
- *
- * 07..05 Reserved, must be 0
- * 04..00 TRC<4..0> Tx FIFO trigger active 0x10 = 16 bytes
- */
- write_reg(info, TRC0, 0x10);
-
- /* TRC1 Transmit Ready Control 1
- *
- * 07..05 Reserved, must be 0
- * 04..00 TRC<4..0> Tx FIFO trigger inactive 0x1e = 31 bytes (full-1)
- */
- write_reg(info, TRC1, 0x1e);
-
- /* CTL, MSCI control register
- *
- * 07..06 Reserved, set to 0
- * 05 UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC)
- * 04 IDLC, idle control, 0=mark 1=idle register
- * 03 BRK, break, 0=off 1 =on (async)
- * 02 SYNCLD, sync char load enable (BSC) 1=enabled
- * 01 GOP, go active on poll (LOOP mode) 1=enabled
- * 00 RTS, RTS output control, 0=active 1=inactive
- *
- * 0001 0001
- */
- RegValue = 0x10;
- if (!(info->serial_signals & SerialSignal_RTS))
- RegValue |= 0x01;
- write_reg(info, CTL, RegValue);
-
- /* enable status interrupts */
- info->ie0_value |= TXINTE + RXINTE;
- write_reg(info, IE0, info->ie0_value);
-
- /* enable break detect interrupt */
- info->ie1_value = BRKD;
- write_reg(info, IE1, info->ie1_value);
-
- /* enable rx overrun interrupt */
- info->ie2_value = OVRN;
- write_reg(info, IE2, info->ie2_value);
-
- set_rate( info, info->params.data_rate * 16 );
-}
-
-/* Program the SCA for HDLC communications.
- */
-static void hdlc_mode(SLMP_INFO *info)
-{
- unsigned char RegValue;
- u32 DpllDivisor;
-
- // Can't use DPLL because SCA outputs recovered clock on RxC when
- // DPLL mode selected. This causes output contention with RxC receiver.
- // Use of DPLL would require external hardware to disable RxC receiver
- // when DPLL mode selected.
- info->params.flags &= ~(HDLC_FLAG_TXC_DPLL + HDLC_FLAG_RXC_DPLL);
-
- /* disable DMA interrupts */
- write_reg(info, TXDMA + DIR, 0);
- write_reg(info, RXDMA + DIR, 0);
-
- /* MD0, Mode Register 0
- *
- * 07..05 PRCTL<2..0>, Protocol Mode, 100=HDLC
- * 04 AUTO, Auto-enable (RTS/CTS/DCD)
- * 03 Reserved, must be 0
- * 02 CRCCC, CRC Calculation, 1=enabled
- * 01 CRC1, CRC selection, 0=CRC-16,1=CRC-CCITT-16
- * 00 CRC0, CRC initial value, 1 = all 1s
- *
- * 1000 0001
- */
- RegValue = 0x81;
- if (info->params.flags & HDLC_FLAG_AUTO_CTS)
- RegValue |= BIT4;
- if (info->params.flags & HDLC_FLAG_AUTO_DCD)
- RegValue |= BIT4;
- if (info->params.crc_type == HDLC_CRC_16_CCITT)
- RegValue |= BIT2 + BIT1;
- write_reg(info, MD0, RegValue);
-
- /* MD1, Mode Register 1
- *
- * 07..06 ADDRS<1..0>, Address detect, 00=no addr check
- * 05..04 TXCHR<1..0>, tx char size, 00=8 bits
- * 03..02 RXCHR<1..0>, rx char size, 00=8 bits
- * 01..00 PMPM<1..0>, Parity mode, 00=no parity
- *
- * 0000 0000
- */
- RegValue = 0x00;
- write_reg(info, MD1, RegValue);
-
- /* MD2, Mode Register 2
- *
- * 07 NRZFM, 0=NRZ, 1=FM
- * 06..05 CODE<1..0> Encoding, 00=NRZ
- * 04..03 DRATE<1..0> DPLL Divisor, 00=8
- * 02 Reserved, must be 0
- * 01..00 CNCT<1..0> Channel connection, 0=normal
- *
- * 0000 0000
- */
- RegValue = 0x00;
- switch(info->params.encoding) {
- case HDLC_ENCODING_NRZI: RegValue |= BIT5; break;
- case HDLC_ENCODING_BIPHASE_MARK: RegValue |= BIT7 + BIT5; break; /* aka FM1 */
- case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT7 + BIT6; break; /* aka FM0 */
- case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT7; break; /* aka Manchester */
-#if 0
- case HDLC_ENCODING_NRZB: /* not supported */
- case HDLC_ENCODING_NRZI_MARK: /* not supported */
- case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: /* not supported */
-#endif
- }
- if ( info->params.flags & HDLC_FLAG_DPLL_DIV16 ) {
- DpllDivisor = 16;
- RegValue |= BIT3;
- } else if ( info->params.flags & HDLC_FLAG_DPLL_DIV8 ) {
- DpllDivisor = 8;
- } else {
- DpllDivisor = 32;
- RegValue |= BIT4;
- }
- write_reg(info, MD2, RegValue);
-
-
- /* RXS, Receive clock source
- *
- * 07 Reserved, must be 0
- * 06..04 RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL
- * 03..00 RXBR<3..0>, rate divisor, 0000=1
- */
- RegValue=0;
- if (info->params.flags & HDLC_FLAG_RXC_BRG)
- RegValue |= BIT6;
- if (info->params.flags & HDLC_FLAG_RXC_DPLL)
- RegValue |= BIT6 + BIT5;
- write_reg(info, RXS, RegValue);
-
- /* TXS, Transmit clock source
- *
- * 07 Reserved, must be 0
- * 06..04 RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock
- * 03..00 RXBR<3..0>, rate divisor, 0000=1
- */
- RegValue=0;
- if (info->params.flags & HDLC_FLAG_TXC_BRG)
- RegValue |= BIT6;
- if (info->params.flags & HDLC_FLAG_TXC_DPLL)
- RegValue |= BIT6 + BIT5;
- write_reg(info, TXS, RegValue);
-
- if (info->params.flags & HDLC_FLAG_RXC_DPLL)
- set_rate(info, info->params.clock_speed * DpllDivisor);
- else
- set_rate(info, info->params.clock_speed);
-
- /* GPDATA (General Purpose I/O Data Register)
- *
- * 6,4,2,0 CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out
- */
- if (info->params.flags & HDLC_FLAG_TXC_BRG)
- info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
- else
- info->port_array[0]->ctrlreg_value &= ~(BIT0 << (info->port_num * 2));
- write_control_reg(info);
-
- /* RRC Receive Ready Control 0
- *
- * 07..05 Reserved, must be 0
- * 04..00 RRC<4..0> Rx FIFO trigger active
- */
- write_reg(info, RRC, rx_active_fifo_level);
-
- /* TRC0 Transmit Ready Control 0
- *
- * 07..05 Reserved, must be 0
- * 04..00 TRC<4..0> Tx FIFO trigger active
- */
- write_reg(info, TRC0, tx_active_fifo_level);
-
- /* TRC1 Transmit Ready Control 1
- *
- * 07..05 Reserved, must be 0
- * 04..00 TRC<4..0> Tx FIFO trigger inactive 0x1f = 32 bytes (full)
- */
- write_reg(info, TRC1, (unsigned char)(tx_negate_fifo_level - 1));
-
- /* DMR, DMA Mode Register
- *
- * 07..05 Reserved, must be 0
- * 04 TMOD, Transfer Mode: 1=chained-block
- * 03 Reserved, must be 0
- * 02 NF, Number of Frames: 1=multi-frame
- * 01 CNTE, Frame End IRQ Counter enable: 0=disabled
- * 00 Reserved, must be 0
- *
- * 0001 0100
- */
- write_reg(info, TXDMA + DMR, 0x14);
- write_reg(info, RXDMA + DMR, 0x14);
-
- /* Set chain pointer base (upper 8 bits of 24 bit addr) */
- write_reg(info, RXDMA + CPB,
- (unsigned char)(info->buffer_list_phys >> 16));
-
- /* Set chain pointer base (upper 8 bits of 24 bit addr) */
- write_reg(info, TXDMA + CPB,
- (unsigned char)(info->buffer_list_phys >> 16));
-
- /* enable status interrupts. other code enables/disables
- * the individual sources for these two interrupt classes.
- */
- info->ie0_value |= TXINTE + RXINTE;
- write_reg(info, IE0, info->ie0_value);
-
- /* CTL, MSCI control register
- *
- * 07..06 Reserved, set to 0
- * 05 UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC)
- * 04 IDLC, idle control, 0=mark 1=idle register
- * 03 BRK, break, 0=off 1 =on (async)
- * 02 SYNCLD, sync char load enable (BSC) 1=enabled
- * 01 GOP, go active on poll (LOOP mode) 1=enabled
- * 00 RTS, RTS output control, 0=active 1=inactive
- *
- * 0001 0001
- */
- RegValue = 0x10;
- if (!(info->serial_signals & SerialSignal_RTS))
- RegValue |= 0x01;
- write_reg(info, CTL, RegValue);
-
- /* preamble not supported ! */
-
- tx_set_idle(info);
- tx_stop(info);
- rx_stop(info);
-
- set_rate(info, info->params.clock_speed);
-
- if (info->params.loopback)
- enable_loopback(info,1);
-}
-
-/* Set the transmit HDLC idle mode
- */
-static void tx_set_idle(SLMP_INFO *info)
-{
- unsigned char RegValue = 0xff;
-
- /* Map API idle mode to SCA register bits */
- switch(info->idle_mode) {
- case HDLC_TXIDLE_FLAGS: RegValue = 0x7e; break;
- case HDLC_TXIDLE_ALT_ZEROS_ONES: RegValue = 0xaa; break;
- case HDLC_TXIDLE_ZEROS: RegValue = 0x00; break;
- case HDLC_TXIDLE_ONES: RegValue = 0xff; break;
- case HDLC_TXIDLE_ALT_MARK_SPACE: RegValue = 0xaa; break;
- case HDLC_TXIDLE_SPACE: RegValue = 0x00; break;
- case HDLC_TXIDLE_MARK: RegValue = 0xff; break;
- }
-
- write_reg(info, IDL, RegValue);
-}
-
-/* Query the adapter for the state of the V24 status (input) signals.
- */
-static void get_signals(SLMP_INFO *info)
-{
- u16 status = read_reg(info, SR3);
- u16 gpstatus = read_status_reg(info);
- u16 testbit;
-
- /* clear all serial signals except RTS and DTR */
- info->serial_signals &= SerialSignal_RTS | SerialSignal_DTR;
-
- /* set serial signal bits to reflect MISR */
-
- if (!(status & BIT3))
- info->serial_signals |= SerialSignal_CTS;
-
- if ( !(status & BIT2))
- info->serial_signals |= SerialSignal_DCD;
-
- testbit = BIT1 << (info->port_num * 2); // Port 0..3 RI is GPDATA<1,3,5,7>
- if (!(gpstatus & testbit))
- info->serial_signals |= SerialSignal_RI;
-
- testbit = BIT0 << (info->port_num * 2); // Port 0..3 DSR is GPDATA<0,2,4,6>
- if (!(gpstatus & testbit))
- info->serial_signals |= SerialSignal_DSR;
-}
-
-/* Set the state of RTS and DTR based on contents of
- * serial_signals member of device context.
- */
-static void set_signals(SLMP_INFO *info)
-{
- unsigned char RegValue;
- u16 EnableBit;
-
- RegValue = read_reg(info, CTL);
- if (info->serial_signals & SerialSignal_RTS)
- RegValue &= ~BIT0;
- else
- RegValue |= BIT0;
- write_reg(info, CTL, RegValue);
-
- // Port 0..3 DTR is ctrl reg <1,3,5,7>
- EnableBit = BIT1 << (info->port_num*2);
- if (info->serial_signals & SerialSignal_DTR)
- info->port_array[0]->ctrlreg_value &= ~EnableBit;
- else
- info->port_array[0]->ctrlreg_value |= EnableBit;
- write_control_reg(info);
-}
-
-/*******************/
-/* DMA Buffer Code */
-/*******************/
-
-/* Set the count for all receive buffers to SCABUFSIZE
- * and set the current buffer to the first buffer. This effectively
- * makes all buffers free and discards any data in buffers.
- */
-static void rx_reset_buffers(SLMP_INFO *info)
-{
- rx_free_frame_buffers(info, 0, info->rx_buf_count - 1);
-}
-
-/* Free the buffers used by a received frame
- *
- * info pointer to device instance data
- * first index of 1st receive buffer of frame
- * last index of last receive buffer of frame
- */
-static void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last)
-{
- bool done = false;
-
- while(!done) {
- /* reset current buffer for reuse */
- info->rx_buf_list[first].status = 0xff;
-
- if (first == last) {
- done = true;
- /* set new last rx descriptor address */
- write_reg16(info, RXDMA + EDA, info->rx_buf_list_ex[first].phys_entry);
- }
-
- first++;
- if (first == info->rx_buf_count)
- first = 0;
- }
-
- /* set current buffer to next buffer after last buffer of frame */
- info->current_rx_buf = first;
-}
-
-/* Return a received frame from the receive DMA buffers.
- * Only frames received without errors are returned.
- *
- * Return Value: true if frame returned, otherwise false
- */
-static bool rx_get_frame(SLMP_INFO *info)
-{
- unsigned int StartIndex, EndIndex; /* index of 1st and last buffers of Rx frame */
- unsigned short status;
- unsigned int framesize = 0;
- bool ReturnCode = false;
- unsigned long flags;
- struct tty_struct *tty = info->port.tty;
- unsigned char addr_field = 0xff;
- SCADESC *desc;
- SCADESC_EX *desc_ex;
-
-CheckAgain:
- /* assume no frame returned, set zero length */
- framesize = 0;
- addr_field = 0xff;
-
- /*
- * current_rx_buf points to the 1st buffer of the next available
- * receive frame. To find the last buffer of the frame look for
- * a non-zero status field in the buffer entries. (The status
- * field is set by the 16C32 after completing a receive frame.
- */
- StartIndex = EndIndex = info->current_rx_buf;
-
- for ( ;; ) {
- desc = &info->rx_buf_list[EndIndex];
- desc_ex = &info->rx_buf_list_ex[EndIndex];
-
- if (desc->status == 0xff)
- goto Cleanup; /* current desc still in use, no frames available */
-
- if (framesize == 0 && info->params.addr_filter != 0xff)
- addr_field = desc_ex->virt_addr[0];
-
- framesize += desc->length;
-
- /* Status != 0 means last buffer of frame */
- if (desc->status)
- break;
-
- EndIndex++;
- if (EndIndex == info->rx_buf_count)
- EndIndex = 0;
-
- if (EndIndex == info->current_rx_buf) {
- /* all buffers have been 'used' but none mark */
- /* the end of a frame. Reset buffers and receiver. */
- if ( info->rx_enabled ){
- spin_lock_irqsave(&info->lock,flags);
- rx_start(info);
- spin_unlock_irqrestore(&info->lock,flags);
- }
- goto Cleanup;
- }
-
- }
-
- /* check status of receive frame */
-
- /* frame status is byte stored after frame data
- *
- * 7 EOM (end of msg), 1 = last buffer of frame
- * 6 Short Frame, 1 = short frame
- * 5 Abort, 1 = frame aborted
- * 4 Residue, 1 = last byte is partial
- * 3 Overrun, 1 = overrun occurred during frame reception
- * 2 CRC, 1 = CRC error detected
- *
- */
- status = desc->status;
-
- /* ignore CRC bit if not using CRC (bit is undefined) */
- /* Note:CRC is not save to data buffer */
- if (info->params.crc_type == HDLC_CRC_NONE)
- status &= ~BIT2;
-
- if (framesize == 0 ||
- (addr_field != 0xff && addr_field != info->params.addr_filter)) {
- /* discard 0 byte frames, this seems to occur sometime
- * when remote is idling flags.
- */
- rx_free_frame_buffers(info, StartIndex, EndIndex);
- goto CheckAgain;
- }
-
- if (framesize < 2)
- status |= BIT6;
-
- if (status & (BIT6+BIT5+BIT3+BIT2)) {
- /* received frame has errors,
- * update counts and mark frame size as 0
- */
- if (status & BIT6)
- info->icount.rxshort++;
- else if (status & BIT5)
- info->icount.rxabort++;
- else if (status & BIT3)
- info->icount.rxover++;
- else
- info->icount.rxcrc++;
-
- framesize = 0;
-#if SYNCLINK_GENERIC_HDLC
- {
- info->netdev->stats.rx_errors++;
- info->netdev->stats.rx_frame_errors++;
- }
-#endif
- }
-
- if ( debug_level >= DEBUG_LEVEL_BH )
- printk("%s(%d):%s rx_get_frame() status=%04X size=%d\n",
- __FILE__,__LINE__,info->device_name,status,framesize);
-
- if ( debug_level >= DEBUG_LEVEL_DATA )
- trace_block(info,info->rx_buf_list_ex[StartIndex].virt_addr,
- min_t(unsigned int, framesize, SCABUFSIZE), 0);
-
- if (framesize) {
- if (framesize > info->max_frame_size)
- info->icount.rxlong++;
- else {
- /* copy dma buffer(s) to contiguous intermediate buffer */
- int copy_count = framesize;
- int index = StartIndex;
- unsigned char *ptmp = info->tmp_rx_buf;
- info->tmp_rx_buf_count = framesize;
-
- info->icount.rxok++;
-
- while(copy_count) {
- int partial_count = min(copy_count,SCABUFSIZE);
- memcpy( ptmp,
- info->rx_buf_list_ex[index].virt_addr,
- partial_count );
- ptmp += partial_count;
- copy_count -= partial_count;
-
- if ( ++index == info->rx_buf_count )
- index = 0;
- }
-
-#if SYNCLINK_GENERIC_HDLC
- if (info->netcount)
- hdlcdev_rx(info,info->tmp_rx_buf,framesize);
- else
-#endif
- ldisc_receive_buf(tty,info->tmp_rx_buf,
- info->flag_buf, framesize);
- }
- }
- /* Free the buffers used by this frame. */
- rx_free_frame_buffers( info, StartIndex, EndIndex );
-
- ReturnCode = true;
-
-Cleanup:
- if ( info->rx_enabled && info->rx_overflow ) {
- /* Receiver is enabled, but needs to restarted due to
- * rx buffer overflow. If buffers are empty, restart receiver.
- */
- if (info->rx_buf_list[EndIndex].status == 0xff) {
- spin_lock_irqsave(&info->lock,flags);
- rx_start(info);
- spin_unlock_irqrestore(&info->lock,flags);
- }
- }
-
- return ReturnCode;
-}
-
-/* load the transmit DMA buffer with data
- */
-static void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count)
-{
- unsigned short copy_count;
- unsigned int i = 0;
- SCADESC *desc;
- SCADESC_EX *desc_ex;
-
- if ( debug_level >= DEBUG_LEVEL_DATA )
- trace_block(info, buf, min_t(unsigned int, count, SCABUFSIZE), 1);
-
- /* Copy source buffer to one or more DMA buffers, starting with
- * the first transmit dma buffer.
- */
- for(i=0;;)
- {
- copy_count = min_t(unsigned int, count, SCABUFSIZE);
-
- desc = &info->tx_buf_list[i];
- desc_ex = &info->tx_buf_list_ex[i];
-
- load_pci_memory(info, desc_ex->virt_addr,buf,copy_count);
-
- desc->length = copy_count;
- desc->status = 0;
-
- buf += copy_count;
- count -= copy_count;
-
- if (!count)
- break;
-
- i++;
- if (i >= info->tx_buf_count)
- i = 0;
- }
-
- info->tx_buf_list[i].status = 0x81; /* set EOM and EOT status */
- info->last_tx_buf = ++i;
-}
-
-static bool register_test(SLMP_INFO *info)
-{
- static unsigned char testval[] = {0x00, 0xff, 0xaa, 0x55, 0x69, 0x96};
- static unsigned int count = ARRAY_SIZE(testval);
- unsigned int i;
- bool rc = true;
- unsigned long flags;
-
- spin_lock_irqsave(&info->lock,flags);
- reset_port(info);
-
- /* assume failure */
- info->init_error = DiagStatus_AddressFailure;
-
- /* Write bit patterns to various registers but do it out of */
- /* sync, then read back and verify values. */
-
- for (i = 0 ; i < count ; i++) {
- write_reg(info, TMC, testval[i]);
- write_reg(info, IDL, testval[(i+1)%count]);
- write_reg(info, SA0, testval[(i+2)%count]);
- write_reg(info, SA1, testval[(i+3)%count]);
-
- if ( (read_reg(info, TMC) != testval[i]) ||
- (read_reg(info, IDL) != testval[(i+1)%count]) ||
- (read_reg(info, SA0) != testval[(i+2)%count]) ||
- (read_reg(info, SA1) != testval[(i+3)%count]) )
- {
- rc = false;
- break;
- }
- }
-
- reset_port(info);
- spin_unlock_irqrestore(&info->lock,flags);
-
- return rc;
-}
-
-static bool irq_test(SLMP_INFO *info)
-{
- unsigned long timeout;
- unsigned long flags;
-
- unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0;
-
- spin_lock_irqsave(&info->lock,flags);
- reset_port(info);
-
- /* assume failure */
- info->init_error = DiagStatus_IrqFailure;
- info->irq_occurred = false;
-
- /* setup timer0 on SCA0 to interrupt */
-
- /* IER2<7..4> = timer<3..0> interrupt enables (1=enabled) */
- write_reg(info, IER2, (unsigned char)((info->port_num & 1) ? BIT6 : BIT4));
-
- write_reg(info, (unsigned char)(timer + TEPR), 0); /* timer expand prescale */
- write_reg16(info, (unsigned char)(timer + TCONR), 1); /* timer constant */
-
-
- /* TMCS, Timer Control/Status Register
- *
- * 07 CMF, Compare match flag (read only) 1=match
- * 06 ECMI, CMF Interrupt Enable: 1=enabled
- * 05 Reserved, must be 0
- * 04 TME, Timer Enable
- * 03..00 Reserved, must be 0
- *
- * 0101 0000
- */
- write_reg(info, (unsigned char)(timer + TMCS), 0x50);
-
- spin_unlock_irqrestore(&info->lock,flags);
-
- timeout=100;
- while( timeout-- && !info->irq_occurred ) {
- msleep_interruptible(10);
- }
-
- spin_lock_irqsave(&info->lock,flags);
- reset_port(info);
- spin_unlock_irqrestore(&info->lock,flags);
-
- return info->irq_occurred;
-}
-
-/* initialize individual SCA device (2 ports)
- */
-static bool sca_init(SLMP_INFO *info)
-{
- /* set wait controller to single mem partition (low), no wait states */
- write_reg(info, PABR0, 0); /* wait controller addr boundary 0 */
- write_reg(info, PABR1, 0); /* wait controller addr boundary 1 */
- write_reg(info, WCRL, 0); /* wait controller low range */
- write_reg(info, WCRM, 0); /* wait controller mid range */
- write_reg(info, WCRH, 0); /* wait controller high range */
-
- /* DPCR, DMA Priority Control
- *
- * 07..05 Not used, must be 0
- * 04 BRC, bus release condition: 0=all transfers complete
- * 03 CCC, channel change condition: 0=every cycle
- * 02..00 PR<2..0>, priority 100=round robin
- *
- * 00000100 = 0x04
- */
- write_reg(info, DPCR, dma_priority);
-
- /* DMA Master Enable, BIT7: 1=enable all channels */
- write_reg(info, DMER, 0x80);
-
- /* enable all interrupt classes */
- write_reg(info, IER0, 0xff); /* TxRDY,RxRDY,TxINT,RxINT (ports 0-1) */
- write_reg(info, IER1, 0xff); /* DMIB,DMIA (channels 0-3) */
- write_reg(info, IER2, 0xf0); /* TIRQ (timers 0-3) */
-
- /* ITCR, interrupt control register
- * 07 IPC, interrupt priority, 0=MSCI->DMA
- * 06..05 IAK<1..0>, Acknowledge cycle, 00=non-ack cycle
- * 04 VOS, Vector Output, 0=unmodified vector
- * 03..00 Reserved, must be 0
- */
- write_reg(info, ITCR, 0);
-
- return true;
-}
-
-/* initialize adapter hardware
- */
-static bool init_adapter(SLMP_INFO *info)
-{
- int i;
-
- /* Set BIT30 of Local Control Reg 0x50 to reset SCA */
- volatile u32 *MiscCtrl = (u32 *)(info->lcr_base + 0x50);
- u32 readval;
-
- info->misc_ctrl_value |= BIT30;
- *MiscCtrl = info->misc_ctrl_value;
-
- /*
- * Force at least 170ns delay before clearing
- * reset bit. Each read from LCR takes at least
- * 30ns so 10 times for 300ns to be safe.
- */
- for(i=0;i<10;i++)
- readval = *MiscCtrl;
-
- info->misc_ctrl_value &= ~BIT30;
- *MiscCtrl = info->misc_ctrl_value;
-
- /* init control reg (all DTRs off, all clksel=input) */
- info->ctrlreg_value = 0xaa;
- write_control_reg(info);
-
- {
- volatile u32 *LCR1BRDR = (u32 *)(info->lcr_base + 0x2c);
- lcr1_brdr_value &= ~(BIT5 + BIT4 + BIT3);
-
- switch(read_ahead_count)
- {
- case 16:
- lcr1_brdr_value |= BIT5 + BIT4 + BIT3;
- break;
- case 8:
- lcr1_brdr_value |= BIT5 + BIT4;
- break;
- case 4:
- lcr1_brdr_value |= BIT5 + BIT3;
- break;
- case 0:
- lcr1_brdr_value |= BIT5;
- break;
- }
-
- *LCR1BRDR = lcr1_brdr_value;
- *MiscCtrl = misc_ctrl_value;
- }
-
- sca_init(info->port_array[0]);
- sca_init(info->port_array[2]);
-
- return true;
-}
-
-/* Loopback an HDLC frame to test the hardware
- * interrupt and DMA functions.
- */
-static bool loopback_test(SLMP_INFO *info)
-{
-#define TESTFRAMESIZE 20
-
- unsigned long timeout;
- u16 count = TESTFRAMESIZE;
- unsigned char buf[TESTFRAMESIZE];
- bool rc = false;
- unsigned long flags;
-
- struct tty_struct *oldtty = info->port.tty;
- u32 speed = info->params.clock_speed;
-
- info->params.clock_speed = 3686400;
- info->port.tty = NULL;
-
- /* assume failure */
- info->init_error = DiagStatus_DmaFailure;
-
- /* build and send transmit frame */
- for (count = 0; count < TESTFRAMESIZE;++count)
- buf[count] = (unsigned char)count;
-
- memset(info->tmp_rx_buf,0,TESTFRAMESIZE);
-
- /* program hardware for HDLC and enabled receiver */
- spin_lock_irqsave(&info->lock,flags);
- hdlc_mode(info);
- enable_loopback(info,1);
- rx_start(info);
- info->tx_count = count;
- tx_load_dma_buffer(info,buf,count);
- tx_start(info);
- spin_unlock_irqrestore(&info->lock,flags);
-
- /* wait for receive complete */
- /* Set a timeout for waiting for interrupt. */
- for ( timeout = 100; timeout; --timeout ) {
- msleep_interruptible(10);
-
- if (rx_get_frame(info)) {
- rc = true;
- break;
- }
- }
-
- /* verify received frame length and contents */
- if (rc &&
- ( info->tmp_rx_buf_count != count ||
- memcmp(buf, info->tmp_rx_buf,count))) {
- rc = false;
- }
-
- spin_lock_irqsave(&info->lock,flags);
- reset_adapter(info);
- spin_unlock_irqrestore(&info->lock,flags);
-
- info->params.clock_speed = speed;
- info->port.tty = oldtty;
-
- return rc;
-}
-
-/* Perform diagnostics on hardware
- */
-static int adapter_test( SLMP_INFO *info )
-{
- unsigned long flags;
- if ( debug_level >= DEBUG_LEVEL_INFO )
- printk( "%s(%d):Testing device %s\n",
- __FILE__,__LINE__,info->device_name );
-
- spin_lock_irqsave(&info->lock,flags);
- init_adapter(info);
- spin_unlock_irqrestore(&info->lock,flags);
-
- info->port_array[0]->port_count = 0;
-
- if ( register_test(info->port_array[0]) &&
- register_test(info->port_array[1])) {
-
- info->port_array[0]->port_count = 2;
-
- if ( register_test(info->port_array[2]) &&
- register_test(info->port_array[3]) )
- info->port_array[0]->port_count += 2;
- }
- else {
- printk( "%s(%d):Register test failure for device %s Addr=%08lX\n",
- __FILE__,__LINE__,info->device_name, (unsigned long)(info->phys_sca_base));
- return -ENODEV;
- }
-
- if ( !irq_test(info->port_array[0]) ||
- !irq_test(info->port_array[1]) ||
- (info->port_count == 4 && !irq_test(info->port_array[2])) ||
- (info->port_count == 4 && !irq_test(info->port_array[3]))) {
- printk( "%s(%d):Interrupt test failure for device %s IRQ=%d\n",
- __FILE__,__LINE__,info->device_name, (unsigned short)(info->irq_level) );
- return -ENODEV;
- }
-
- if (!loopback_test(info->port_array[0]) ||
- !loopback_test(info->port_array[1]) ||
- (info->port_count == 4 && !loopback_test(info->port_array[2])) ||
- (info->port_count == 4 && !loopback_test(info->port_array[3]))) {
- printk( "%s(%d):DMA test failure for device %s\n",
- __FILE__,__LINE__,info->device_name);
- return -ENODEV;
- }
-
- if ( debug_level >= DEBUG_LEVEL_INFO )
- printk( "%s(%d):device %s passed diagnostics\n",
- __FILE__,__LINE__,info->device_name );
-
- info->port_array[0]->init_error = 0;
- info->port_array[1]->init_error = 0;
- if ( info->port_count > 2 ) {
- info->port_array[2]->init_error = 0;
- info->port_array[3]->init_error = 0;
- }
-
- return 0;
-}
-
-/* Test the shared memory on a PCI adapter.
- */
-static bool memory_test(SLMP_INFO *info)
-{
- static unsigned long testval[] = { 0x0, 0x55555555, 0xaaaaaaaa,
- 0x66666666, 0x99999999, 0xffffffff, 0x12345678 };
- unsigned long count = ARRAY_SIZE(testval);
- unsigned long i;
- unsigned long limit = SCA_MEM_SIZE/sizeof(unsigned long);
- unsigned long * addr = (unsigned long *)info->memory_base;
-
- /* Test data lines with test pattern at one location. */
-
- for ( i = 0 ; i < count ; i++ ) {
- *addr = testval[i];
- if ( *addr != testval[i] )
- return false;
- }
-
- /* Test address lines with incrementing pattern over */
- /* entire address range. */
-
- for ( i = 0 ; i < limit ; i++ ) {
- *addr = i * 4;
- addr++;
- }
-
- addr = (unsigned long *)info->memory_base;
-
- for ( i = 0 ; i < limit ; i++ ) {
- if ( *addr != i * 4 )
- return false;
- addr++;
- }
-
- memset( info->memory_base, 0, SCA_MEM_SIZE );
- return true;
-}
-
-/* Load data into PCI adapter shared memory.
- *
- * The PCI9050 releases control of the local bus
- * after completing the current read or write operation.
- *
- * While the PCI9050 write FIFO not empty, the
- * PCI9050 treats all of the writes as a single transaction
- * and does not release the bus. This causes DMA latency problems
- * at high speeds when copying large data blocks to the shared memory.
- *
- * This function breaks a write into multiple transations by
- * interleaving a read which flushes the write FIFO and 'completes'
- * the write transation. This allows any pending DMA request to gain control
- * of the local bus in a timely fasion.
- */
-static void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count)
-{
- /* A load interval of 16 allows for 4 32-bit writes at */
- /* 136ns each for a maximum latency of 542ns on the local bus.*/
-
- unsigned short interval = count / sca_pci_load_interval;
- unsigned short i;
-
- for ( i = 0 ; i < interval ; i++ )
- {
- memcpy(dest, src, sca_pci_load_interval);
- read_status_reg(info);
- dest += sca_pci_load_interval;
- src += sca_pci_load_interval;
- }
-
- memcpy(dest, src, count % sca_pci_load_interval);
-}
-
-static void trace_block(SLMP_INFO *info,const char* data, int count, int xmit)
-{
- int i;
- int linecount;
- if (xmit)
- printk("%s tx data:\n",info->device_name);
- else
- printk("%s rx data:\n",info->device_name);
-
- while(count) {
- if (count > 16)
- linecount = 16;
- else
- linecount = count;
-
- for(i=0;i<linecount;i++)
- printk("%02X ",(unsigned char)data[i]);
- for(;i<17;i++)
- printk(" ");
- for(i=0;i<linecount;i++) {
- if (data[i]>=040 && data[i]<=0176)
- printk("%c",data[i]);
- else
- printk(".");
- }
- printk("\n");
-
- data += linecount;
- count -= linecount;
- }
-} /* end of trace_block() */
-
-/* called when HDLC frame times out
- * update stats and do tx completion processing
- */
-static void tx_timeout(struct timer_list *t)
-{
- SLMP_INFO *info = from_timer(info, t, tx_timer);
- unsigned long flags;
-
- if ( debug_level >= DEBUG_LEVEL_INFO )
- printk( "%s(%d):%s tx_timeout()\n",
- __FILE__,__LINE__,info->device_name);
- if(info->tx_active && info->params.mode == MGSL_MODE_HDLC) {
- info->icount.txtimeout++;
- }
- spin_lock_irqsave(&info->lock,flags);
- info->tx_active = false;
- info->tx_count = info->tx_put = info->tx_get = 0;
-
- spin_unlock_irqrestore(&info->lock,flags);
-
-#if SYNCLINK_GENERIC_HDLC
- if (info->netcount)
- hdlcdev_tx_done(info);
- else
-#endif
- bh_transmit(info);
-}
-
-/* called to periodically check the DSR/RI modem signal input status
- */
-static void status_timeout(struct timer_list *t)
-{
- u16 status = 0;
- SLMP_INFO *info = from_timer(info, t, status_timer);
- unsigned long flags;
- unsigned char delta;
-
-
- spin_lock_irqsave(&info->lock,flags);
- get_signals(info);
- spin_unlock_irqrestore(&info->lock,flags);
-
- /* check for DSR/RI state change */
-
- delta = info->old_signals ^ info->serial_signals;
- info->old_signals = info->serial_signals;
-
- if (delta & SerialSignal_DSR)
- status |= MISCSTATUS_DSR_LATCHED|(info->serial_signals&SerialSignal_DSR);
-
- if (delta & SerialSignal_RI)
- status |= MISCSTATUS_RI_LATCHED|(info->serial_signals&SerialSignal_RI);
-
- if (delta & SerialSignal_DCD)
- status |= MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD);
-
- if (delta & SerialSignal_CTS)
- status |= MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS);
-
- if (status)
- isr_io_pin(info,status);
-
- mod_timer(&info->status_timer, jiffies + msecs_to_jiffies(10));
-}
-
-
-/* Register Access Routines -
- * All registers are memory mapped
- */
-#define CALC_REGADDR() \
- unsigned char * RegAddr = (unsigned char*)(info->sca_base + Addr); \
- if (info->port_num > 1) \
- RegAddr += 256; /* port 0-1 SCA0, 2-3 SCA1 */ \
- if ( info->port_num & 1) { \
- if (Addr > 0x7f) \
- RegAddr += 0x40; /* DMA access */ \
- else if (Addr > 0x1f && Addr < 0x60) \
- RegAddr += 0x20; /* MSCI access */ \
- }
-
-
-static unsigned char read_reg(SLMP_INFO * info, unsigned char Addr)
-{
- CALC_REGADDR();
- return *RegAddr;
-}
-static void write_reg(SLMP_INFO * info, unsigned char Addr, unsigned char Value)
-{
- CALC_REGADDR();
- *RegAddr = Value;
-}
-
-static u16 read_reg16(SLMP_INFO * info, unsigned char Addr)
-{
- CALC_REGADDR();
- return *((u16 *)RegAddr);
-}
-
-static void write_reg16(SLMP_INFO * info, unsigned char Addr, u16 Value)
-{
- CALC_REGADDR();
- *((u16 *)RegAddr) = Value;
-}
-
-static unsigned char read_status_reg(SLMP_INFO * info)
-{
- unsigned char *RegAddr = (unsigned char *)info->statctrl_base;
- return *RegAddr;
-}
-
-static void write_control_reg(SLMP_INFO * info)
-{
- unsigned char *RegAddr = (unsigned char *)info->statctrl_base;
- *RegAddr = info->port_array[0]->ctrlreg_value;
-}
-
-
-static int synclinkmp_init_one (struct pci_dev *dev,
- const struct pci_device_id *ent)
-{
- if (pci_enable_device(dev)) {
- printk("error enabling pci device %p\n", dev);
- return -EIO;
- }
- return device_init( ++synclinkmp_adapter_count, dev );
-}
-
-static void synclinkmp_remove_one (struct pci_dev *dev)
-{
-}
projects / linux.git / commitdiff