#define DPHY_CONST 16
#define PHY_CONST_DIV 16
-/*
- * Heuristically guess the PLL tree for a given common multiplier and
- * divisor. Begin with the operational timing and continue to video
- * timing once operational timing has been verified.
- *
- * @mul is the PLL multiplier and @div is the common divisor
- * (pre_pll_clk_div and op_sys_clk_div combined). The final PLL
- * multiplier will be a multiple of @mul.
- *
- * @return Zero on success, error code on error.
- */
-static int
-__ccs_pll_calculate(struct device *dev, const struct ccs_pll_limits *lim,
- const struct ccs_pll_branch_limits_fr *op_lim_fr,
- const struct ccs_pll_branch_limits_bk *op_lim_bk,
- struct ccs_pll *pll, struct ccs_pll_branch_fr *op_pll_fr,
- struct ccs_pll_branch_bk *op_pll_bk, uint32_t mul,
- uint32_t div, uint32_t l, bool cphy, uint32_t phy_const)
+static void
+__ccs_pll_calculate_vt(struct device *dev, const struct ccs_pll_limits *lim,
+ const struct ccs_pll_branch_limits_bk *op_lim_bk,
+ struct ccs_pll *pll, struct ccs_pll_branch_fr *pll_fr,
+ struct ccs_pll_branch_bk *op_pll_bk, bool cphy,
+ uint32_t phy_const)
{
uint32_t sys_div;
uint32_t best_pix_div = INT_MAX >> 1;
uint32_t vt_op_binning_div;
- /*
- * Higher multipliers (and divisors) are often required than
- * necessitated by the external clock and the output clocks.
- * There are limits for all values in the clock tree. These
- * are the minimum and maximum multiplier for mul.
- */
- uint32_t more_mul_min, more_mul_max;
- uint32_t more_mul_factor;
uint32_t min_vt_div, max_vt_div, vt_div;
uint32_t min_sys_div, max_sys_div;
- uint32_t i;
-
- /*
- * Get pre_pll_clk_div so that our pll_op_clk_freq_hz won't be
- * too high.
- */
- dev_dbg(dev, "op_pre_pll_clk_div %u\n", op_pll_fr->pre_pll_clk_div);
-
- /* Don't go above max pll multiplier. */
- more_mul_max = op_lim_fr->max_pll_multiplier / mul;
- dev_dbg(dev, "more_mul_max: max_op_pll_multiplier check: %u\n",
- more_mul_max);
- /* Don't go above max pll op frequency. */
- more_mul_max =
- min_t(uint32_t,
- more_mul_max,
- op_lim_fr->max_pll_op_clk_freq_hz
- / (pll->ext_clk_freq_hz /
- op_pll_fr->pre_pll_clk_div * mul));
- dev_dbg(dev, "more_mul_max: max_pll_op_clk_freq_hz check: %u\n",
- more_mul_max);
- /* Don't go above the division capability of op sys clock divider. */
- more_mul_max = min(more_mul_max,
- op_lim_bk->max_sys_clk_div * op_pll_fr->pre_pll_clk_div
- / div);
- dev_dbg(dev, "more_mul_max: max_op_sys_clk_div check: %u\n",
- more_mul_max);
- /* Ensure we won't go above max_pll_multiplier. */
- more_mul_max = min(more_mul_max, op_lim_fr->max_pll_multiplier / mul);
- dev_dbg(dev, "more_mul_max: min_pll_multiplier check: %u\n",
- more_mul_max);
-
- /* Ensure we won't go below min_pll_op_clk_freq_hz. */
- more_mul_min = DIV_ROUND_UP(op_lim_fr->min_pll_op_clk_freq_hz,
- pll->ext_clk_freq_hz /
- op_pll_fr->pre_pll_clk_div * mul);
- dev_dbg(dev, "more_mul_min: min_op_pll_op_clk_freq_hz check: %u\n",
- more_mul_min);
- /* Ensure we won't go below min_pll_multiplier. */
- more_mul_min = max(more_mul_min,
- DIV_ROUND_UP(op_lim_fr->min_pll_multiplier, mul));
- dev_dbg(dev, "more_mul_min: min_op_pll_multiplier check: %u\n",
- more_mul_min);
-
- if (more_mul_min > more_mul_max) {
- dev_dbg(dev,
- "unable to compute more_mul_min and more_mul_max\n");
- return -EINVAL;
- }
-
- more_mul_factor = lcm(div, op_pll_fr->pre_pll_clk_div) / div;
- dev_dbg(dev, "more_mul_factor: %u\n", more_mul_factor);
- more_mul_factor = lcm(more_mul_factor, op_lim_bk->min_sys_clk_div);
- dev_dbg(dev, "more_mul_factor: min_op_sys_clk_div: %d\n",
- more_mul_factor);
- i = roundup(more_mul_min, more_mul_factor);
- if (!is_one_or_even(i))
- i <<= 1;
-
- dev_dbg(dev, "final more_mul: %u\n", i);
- if (i > more_mul_max) {
- dev_dbg(dev, "final more_mul is bad, max %u\n", more_mul_max);
- return -EINVAL;
- }
-
- op_pll_fr->pll_multiplier = mul * i;
- op_pll_bk->sys_clk_div = div * i / op_pll_fr->pre_pll_clk_div;
- dev_dbg(dev, "op_sys_clk_div: %u\n", op_pll_bk->sys_clk_div);
-
- op_pll_fr->pll_ip_clk_freq_hz = pll->ext_clk_freq_hz
- / op_pll_fr->pre_pll_clk_div;
-
- op_pll_fr->pll_op_clk_freq_hz = op_pll_fr->pll_ip_clk_freq_hz
- * op_pll_fr->pll_multiplier;
-
- if (pll->flags & CCS_PLL_FLAG_LANE_SPEED_MODEL)
- op_pll_bk->pix_clk_div = pll->bits_per_pixel
- * pll->op_lanes * phy_const
- / PHY_CONST_DIV / pll->csi2.lanes / l;
- else
- op_pll_bk->pix_clk_div =
- pll->bits_per_pixel * phy_const / PHY_CONST_DIV / l;
-
- op_pll_bk->pix_clk_freq_hz =
- op_pll_bk->sys_clk_freq_hz / op_pll_bk->pix_clk_div;
-
- dev_dbg(dev, "op_pix_clk_div: %u\n", op_pll_bk->pix_clk_div);
-
- if (pll->flags & CCS_PLL_FLAG_NO_OP_CLOCKS) {
- /* No OP clocks --- VT clocks are used instead. */
- goto out_skip_vt_calc;
- }
/*
* Some sensors perform analogue binning and some do this
/* Find smallest and biggest allowed vt divisor. */
dev_dbg(dev, "min_vt_div: %u\n", min_vt_div);
min_vt_div = max(min_vt_div,
- DIV_ROUND_UP(op_pll_fr->pll_op_clk_freq_hz,
+ DIV_ROUND_UP(pll_fr->pll_op_clk_freq_hz,
lim->vt_bk.max_pix_clk_freq_hz));
dev_dbg(dev, "min_vt_div: max_vt_pix_clk_freq_hz: %u\n",
min_vt_div);
max_vt_div = lim->vt_bk.max_sys_clk_div * lim->vt_bk.max_pix_clk_div;
dev_dbg(dev, "max_vt_div: %u\n", max_vt_div);
max_vt_div = min(max_vt_div,
- DIV_ROUND_UP(op_pll_fr->pll_op_clk_freq_hz,
+ DIV_ROUND_UP(pll_fr->pll_op_clk_freq_hz,
lim->vt_bk.min_pix_clk_freq_hz));
dev_dbg(dev, "max_vt_div: min_vt_pix_clk_freq_hz: %u\n",
max_vt_div);
lim->vt_bk.max_pix_clk_div));
dev_dbg(dev, "min_sys_div: max_vt_pix_clk_div: %u\n", min_sys_div);
min_sys_div = max(min_sys_div,
- op_pll_fr->pll_op_clk_freq_hz
+ pll_fr->pll_op_clk_freq_hz
/ lim->vt_bk.max_sys_clk_freq_hz);
dev_dbg(dev, "min_sys_div: max_pll_op_clk_freq_hz: %u\n", min_sys_div);
min_sys_div = clk_div_even_up(min_sys_div);
lim->vt_bk.min_pix_clk_div));
dev_dbg(dev, "max_sys_div: min_vt_pix_clk_div: %u\n", max_sys_div);
max_sys_div = min(max_sys_div,
- DIV_ROUND_UP(op_pll_fr->pll_op_clk_freq_hz,
+ DIV_ROUND_UP(pll_fr->pll_op_clk_freq_hz,
lim->vt_bk.min_pix_clk_freq_hz));
dev_dbg(dev, "max_sys_div: min_vt_pix_clk_freq_hz: %u\n", max_sys_div);
pll->vt_bk.pix_clk_div = best_pix_div;
pll->vt_bk.sys_clk_freq_hz =
- op_pll_fr->pll_op_clk_freq_hz / pll->vt_bk.sys_clk_div;
+ pll_fr->pll_op_clk_freq_hz / pll->vt_bk.sys_clk_div;
pll->vt_bk.pix_clk_freq_hz =
pll->vt_bk.sys_clk_freq_hz / pll->vt_bk.pix_clk_div;
+}
+
+/*
+ * Heuristically guess the PLL tree for a given common multiplier and
+ * divisor. Begin with the operational timing and continue to video
+ * timing once operational timing has been verified.
+ *
+ * @mul is the PLL multiplier and @div is the common divisor
+ * (pre_pll_clk_div and op_sys_clk_div combined). The final PLL
+ * multiplier will be a multiple of @mul.
+ *
+ * @return Zero on success, error code on error.
+ */
+static int
+__ccs_pll_calculate(struct device *dev, const struct ccs_pll_limits *lim,
+ const struct ccs_pll_branch_limits_fr *op_lim_fr,
+ const struct ccs_pll_branch_limits_bk *op_lim_bk,
+ struct ccs_pll *pll, struct ccs_pll_branch_fr *op_pll_fr,
+ struct ccs_pll_branch_bk *op_pll_bk, uint32_t mul,
+ uint32_t div, uint32_t l, bool cphy, uint32_t phy_const)
+{
+ /*
+ * Higher multipliers (and divisors) are often required than
+ * necessitated by the external clock and the output clocks.
+ * There are limits for all values in the clock tree. These
+ * are the minimum and maximum multiplier for mul.
+ */
+ uint32_t more_mul_min, more_mul_max;
+ uint32_t more_mul_factor;
+ uint32_t i;
+
+ /*
+ * Get pre_pll_clk_div so that our pll_op_clk_freq_hz won't be
+ * too high.
+ */
+ dev_dbg(dev, "op_pre_pll_clk_div %u\n", op_pll_fr->pre_pll_clk_div);
+
+ /* Don't go above max pll multiplier. */
+ more_mul_max = op_lim_fr->max_pll_multiplier / mul;
+ dev_dbg(dev, "more_mul_max: max_op_pll_multiplier check: %u\n",
+ more_mul_max);
+ /* Don't go above max pll op frequency. */
+ more_mul_max =
+ min_t(uint32_t,
+ more_mul_max,
+ op_lim_fr->max_pll_op_clk_freq_hz
+ / (pll->ext_clk_freq_hz /
+ op_pll_fr->pre_pll_clk_div * mul));
+ dev_dbg(dev, "more_mul_max: max_pll_op_clk_freq_hz check: %u\n",
+ more_mul_max);
+ /* Don't go above the division capability of op sys clock divider. */
+ more_mul_max = min(more_mul_max,
+ op_lim_bk->max_sys_clk_div * op_pll_fr->pre_pll_clk_div
+ / div);
+ dev_dbg(dev, "more_mul_max: max_op_sys_clk_div check: %u\n",
+ more_mul_max);
+ /* Ensure we won't go above max_pll_multiplier. */
+ more_mul_max = min(more_mul_max, op_lim_fr->max_pll_multiplier / mul);
+ dev_dbg(dev, "more_mul_max: min_pll_multiplier check: %u\n",
+ more_mul_max);
+
+ /* Ensure we won't go below min_pll_op_clk_freq_hz. */
+ more_mul_min = DIV_ROUND_UP(op_lim_fr->min_pll_op_clk_freq_hz,
+ pll->ext_clk_freq_hz /
+ op_pll_fr->pre_pll_clk_div * mul);
+ dev_dbg(dev, "more_mul_min: min_op_pll_op_clk_freq_hz check: %u\n",
+ more_mul_min);
+ /* Ensure we won't go below min_pll_multiplier. */
+ more_mul_min = max(more_mul_min,
+ DIV_ROUND_UP(op_lim_fr->min_pll_multiplier, mul));
+ dev_dbg(dev, "more_mul_min: min_op_pll_multiplier check: %u\n",
+ more_mul_min);
+
+ if (more_mul_min > more_mul_max) {
+ dev_dbg(dev,
+ "unable to compute more_mul_min and more_mul_max\n");
+ return -EINVAL;
+ }
+
+ more_mul_factor = lcm(div, op_pll_fr->pre_pll_clk_div) / div;
+ dev_dbg(dev, "more_mul_factor: %u\n", more_mul_factor);
+ more_mul_factor = lcm(more_mul_factor, op_lim_bk->min_sys_clk_div);
+ dev_dbg(dev, "more_mul_factor: min_op_sys_clk_div: %d\n",
+ more_mul_factor);
+ i = roundup(more_mul_min, more_mul_factor);
+ if (!is_one_or_even(i))
+ i <<= 1;
+
+ dev_dbg(dev, "final more_mul: %u\n", i);
+ if (i > more_mul_max) {
+ dev_dbg(dev, "final more_mul is bad, max %u\n", more_mul_max);
+ return -EINVAL;
+ }
+
+ op_pll_fr->pll_multiplier = mul * i;
+ op_pll_bk->sys_clk_div = div * i / op_pll_fr->pre_pll_clk_div;
+ dev_dbg(dev, "op_sys_clk_div: %u\n", op_pll_bk->sys_clk_div);
+
+ op_pll_fr->pll_ip_clk_freq_hz = pll->ext_clk_freq_hz
+ / op_pll_fr->pre_pll_clk_div;
+
+ op_pll_fr->pll_op_clk_freq_hz = op_pll_fr->pll_ip_clk_freq_hz
+ * op_pll_fr->pll_multiplier;
+
+ if (pll->flags & CCS_PLL_FLAG_LANE_SPEED_MODEL)
+ op_pll_bk->pix_clk_div = pll->bits_per_pixel
+ * pll->op_lanes * phy_const
+ / PHY_CONST_DIV / pll->csi2.lanes / l;
+ else
+ op_pll_bk->pix_clk_div =
+ pll->bits_per_pixel * phy_const / PHY_CONST_DIV / l;
+
+ op_pll_bk->pix_clk_freq_hz =
+ op_pll_bk->sys_clk_freq_hz / op_pll_bk->pix_clk_div;
+
+ dev_dbg(dev, "op_pix_clk_div: %u\n", op_pll_bk->pix_clk_div);
+
+ if (!(pll->flags & CCS_PLL_FLAG_NO_OP_CLOCKS))
+ __ccs_pll_calculate_vt(dev, lim, op_lim_bk, pll, op_pll_fr,
+ op_pll_bk, cphy, phy_const);
-out_skip_vt_calc:
pll->pixel_rate_pixel_array =
pll->vt_bk.pix_clk_freq_hz * pll->vt_lanes;
projects / linux.git / commitdiff