omap: Fix gpio.c for multi-omap for omap4

Set up METHOD_GPIO_44XX instead of trying to use the METHOD_GPIO_24XX.

Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index a888304b838355307040ccb8c49c57ffabf4744c..6055028dff1e83b0b3073440e6e16e5338ec78c9 100644 (file)
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -202,6 +202,7 @@ struct gpio_bank {
 #define METHOD_GPIO_1610       2
 #define METHOD_GPIO_7XX                3
 #define METHOD_GPIO_24XX       5
+#define METHOD_GPIO_44XX       6
 
 #ifdef CONFIG_ARCH_OMAP16XX
 static struct gpio_bank gpio_bank_1610[5] = {
@@ -312,17 +313,17 @@ static struct omap3_gpio_regs gpio_context[OMAP34XX_NR_GPIOS];
 #ifdef CONFIG_ARCH_OMAP4
 static struct gpio_bank gpio_bank_44xx[6] = {
        { OMAP44XX_GPIO1_BASE, NULL, INT_44XX_GPIO_BANK1, IH_GPIO_BASE,
-               METHOD_GPIO_24XX },
+               METHOD_GPIO_44XX },
        { OMAP44XX_GPIO2_BASE, NULL, INT_44XX_GPIO_BANK2, IH_GPIO_BASE + 32,
-               METHOD_GPIO_24XX },
+               METHOD_GPIO_44XX },
        { OMAP44XX_GPIO3_BASE, NULL, INT_44XX_GPIO_BANK3, IH_GPIO_BASE + 64,
-               METHOD_GPIO_24XX },
+               METHOD_GPIO_44XX },
        { OMAP44XX_GPIO4_BASE, NULL, INT_44XX_GPIO_BANK4, IH_GPIO_BASE + 96,
-               METHOD_GPIO_24XX },
+               METHOD_GPIO_44XX },
        { OMAP44XX_GPIO5_BASE, NULL, INT_44XX_GPIO_BANK5, IH_GPIO_BASE + 128,
-               METHOD_GPIO_24XX },
+               METHOD_GPIO_44XX },
        { OMAP44XX_GPIO6_BASE, NULL, INT_44XX_GPIO_BANK6, IH_GPIO_BASE + 160,
-               METHOD_GPIO_24XX },
+               METHOD_GPIO_44XX },
 };
 
 #endif
@@ -430,7 +431,7 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
                break;
 #endif
 #if defined(CONFIG_ARCH_OMAP4)
-       case METHOD_GPIO_24XX:
+       case METHOD_GPIO_44XX:
                reg += OMAP4_GPIO_OE;
                break;
 #endif
@@ -501,7 +502,7 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
                break;
 #endif
 #ifdef CONFIG_ARCH_OMAP4
-       case METHOD_GPIO_24XX:
+       case METHOD_GPIO_44XX:
                if (enable)
                        reg += OMAP4_GPIO_SETDATAOUT;
                else
@@ -550,7 +551,7 @@ static int _get_gpio_datain(struct gpio_bank *bank, int gpio)
                break;
 #endif
 #ifdef CONFIG_ARCH_OMAP4
-       case METHOD_GPIO_24XX:
+       case METHOD_GPIO_44XX:
                reg += OMAP4_GPIO_DATAIN;
                break;
 #endif
@@ -592,6 +593,7 @@ static int _get_gpio_dataout(struct gpio_bank *bank, int gpio)
 #endif
 #ifdef CONFIG_ARCH_OMAP2PLUS
        case METHOD_GPIO_24XX:
+       case METHOD_GPIO_44XX:
                reg += OMAP24XX_GPIO_DATAOUT;
                break;
 #endif
@@ -622,11 +624,12 @@ void omap_set_gpio_debounce(int gpio, int enable)
 
        bank = get_gpio_bank(gpio);
        reg = bank->base;
-#ifdef CONFIG_ARCH_OMAP4
-       reg += OMAP4_GPIO_DEBOUNCENABLE;
-#else
-       reg += OMAP24XX_GPIO_DEBOUNCE_EN;
-#endif
+
+       if (cpu_is_omap44xx())
+               reg += OMAP4_GPIO_DEBOUNCENABLE;
+       else
+               reg += OMAP24XX_GPIO_DEBOUNCE_EN;
+
        if (!(bank->mod_usage & l)) {
                printk(KERN_ERR "GPIO %d not requested\n", gpio);
                return;
@@ -672,11 +675,12 @@ void omap_set_gpio_debounce_time(int gpio, int enc_time)
        }
 
        enc_time &= 0xff;
-#ifdef CONFIG_ARCH_OMAP4
-       reg += OMAP4_GPIO_DEBOUNCINGTIME;
-#else
-       reg += OMAP24XX_GPIO_DEBOUNCE_VAL;
-#endif
+
+       if (cpu_is_omap44xx())
+               reg += OMAP4_GPIO_DEBOUNCINGTIME;
+       else
+               reg += OMAP24XX_GPIO_DEBOUNCE_VAL;
+
        __raw_writel(enc_time, reg);
 }
 EXPORT_SYMBOL(omap_set_gpio_debounce_time);
@@ -854,6 +858,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 #endif
 #ifdef CONFIG_ARCH_OMAP2PLUS
        case METHOD_GPIO_24XX:
+       case METHOD_GPIO_44XX:
                set_24xx_gpio_triggering(bank, gpio, trigger);
                break;
 #endif
@@ -938,7 +943,7 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
                break;
 #endif
 #if defined(CONFIG_ARCH_OMAP4)
-       case METHOD_GPIO_24XX:
+       case METHOD_GPIO_44XX:
                reg += OMAP4_GPIO_IRQSTATUS0;
                break;
 #endif
@@ -949,12 +954,11 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
        __raw_writel(gpio_mask, reg);
 
        /* Workaround for clearing DSP GPIO interrupts to allow retention */
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-       reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2;
-#endif
-#if defined(CONFIG_ARCH_OMAP4)
-       reg = bank->base + OMAP4_GPIO_IRQSTATUS1;
-#endif
+       if (cpu_is_omap24xx() || cpu_is_omap34xx())
+               reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2;
+       else if (cpu_is_omap44xx())
+               reg = bank->base + OMAP4_GPIO_IRQSTATUS1;
+
        if (cpu_is_omap24xx() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
                __raw_writel(gpio_mask, reg);
 
@@ -1010,7 +1014,7 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
                break;
 #endif
 #if defined(CONFIG_ARCH_OMAP4)
-       case METHOD_GPIO_24XX:
+       case METHOD_GPIO_44XX:
                reg += OMAP4_GPIO_IRQSTATUSSET0;
                mask = 0xffffffff;
                break;
@@ -1082,7 +1086,7 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
                break;
 #endif
 #ifdef CONFIG_ARCH_OMAP4
-       case METHOD_GPIO_24XX:
+       case METHOD_GPIO_44XX:
                if (enable)
                        reg += OMAP4_GPIO_IRQSTATUSSET0;
                else
@@ -1128,6 +1132,7 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
 #endif
 #ifdef CONFIG_ARCH_OMAP2PLUS
        case METHOD_GPIO_24XX:
+       case METHOD_GPIO_44XX:
                if (bank->non_wakeup_gpios & (1 << gpio)) {
                        printk(KERN_ERR "Unable to modify wakeup on "
                                        "non-wakeup GPIO%d\n",
@@ -1222,7 +1227,8 @@ static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
        }
 #endif
 #ifdef CONFIG_ARCH_OMAP2PLUS
-       if (bank->method == METHOD_GPIO_24XX) {
+       if ((bank->method == METHOD_GPIO_24XX) ||
+                       (bank->method == METHOD_GPIO_44XX)) {
                /* Disable wake-up during idle for dynamic tick */
                void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
                __raw_writel(1 << offset, reg);
@@ -1284,7 +1290,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
                isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1;
 #endif
 #if defined(CONFIG_ARCH_OMAP4)
-       if (bank->method == METHOD_GPIO_24XX)
+       if (bank->method == METHOD_GPIO_44XX)
                isr_reg = bank->base + OMAP4_GPIO_IRQSTATUS0;
 #endif
        while(1) {
@@ -1564,6 +1570,7 @@ static int gpio_is_input(struct gpio_bank *bank, int mask)
                reg += OMAP7XX_GPIO_DIR_CONTROL;
                break;
        case METHOD_GPIO_24XX:
+       case METHOD_GPIO_44XX:
                reg += OMAP24XX_GPIO_OE;
                break;
        }
@@ -1803,28 +1810,41 @@ static int __init _omap_gpio_init(void)
                }
 
 #ifdef CONFIG_ARCH_OMAP2PLUS
-               if (bank->method == METHOD_GPIO_24XX) {
+               if ((bank->method == METHOD_GPIO_24XX) ||
+                               (bank->method == METHOD_GPIO_44XX)) {
                        static const u32 non_wakeup_gpios[] = {
                                0xe203ffc0, 0x08700040
                        };
-               if (cpu_is_omap44xx()) {
-                       __raw_writel(0xffffffff, bank->base +
+
+                       if (cpu_is_omap44xx()) {
+                               __raw_writel(0xffffffff, bank->base +
                                                OMAP4_GPIO_IRQSTATUSCLR0);
-                       __raw_writew(0x0015, bank->base +
+                               __raw_writew(0x0015, bank->base +
                                                OMAP4_GPIO_SYSCONFIG);
-                       __raw_writel(0x00000000, bank->base +
+                               __raw_writel(0x00000000, bank->base +
                                                 OMAP4_GPIO_DEBOUNCENABLE);
-                       /* Initialize interface clock ungated, module enabled */
-                       __raw_writel(0, bank->base + OMAP4_GPIO_CTRL);
-               } else {
-                       __raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_IRQENABLE1);
-                       __raw_writel(0xffffffff, bank->base + OMAP24XX_GPIO_IRQSTATUS1);
-                       __raw_writew(0x0015, bank->base + OMAP24XX_GPIO_SYSCONFIG);
-                       __raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_DEBOUNCE_EN);
-
-                       /* Initialize interface clock ungated, module enabled */
-                       __raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL);
-               }
+                               /*
+                                * Initialize interface clock ungated,
+                                * module enabled
+                                */
+                               __raw_writel(0, bank->base + OMAP4_GPIO_CTRL);
+                       } else {
+                               __raw_writel(0x00000000, bank->base +
+                                               OMAP24XX_GPIO_IRQENABLE1);
+                               __raw_writel(0xffffffff, bank->base +
+                                               OMAP24XX_GPIO_IRQSTATUS1);
+                               __raw_writew(0x0015, bank->base +
+                                               OMAP24XX_GPIO_SYSCONFIG);
+                               __raw_writel(0x00000000, bank->base +
+                                               OMAP24XX_GPIO_DEBOUNCE_EN);
+
+                               /*
+                                * Initialize interface clock ungated,
+                                * module enabled
+                                */
+                               __raw_writel(0, bank->base +
+                                               OMAP24XX_GPIO_CTRL);
+                       }
                        if (i < ARRAY_SIZE(non_wakeup_gpios))
                                bank->non_wakeup_gpios = non_wakeup_gpios[i];
                        gpio_count = 32;
@@ -1926,7 +1946,7 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
                        break;
 #endif
 #ifdef CONFIG_ARCH_OMAP4
-               case METHOD_GPIO_24XX:
+               case METHOD_GPIO_44XX:
                        wake_status = bank->base + OMAP4_GPIO_IRQWAKEN0;
                        wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0;
                        wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0;
@@ -1973,7 +1993,7 @@ static int omap_gpio_resume(struct sys_device *dev)
                        break;
 #endif
 #ifdef CONFIG_ARCH_OMAP4
-               case METHOD_GPIO_24XX:
+               case METHOD_GPIO_44XX:
                        wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0;
                        wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0;
                        break;
@@ -2020,29 +2040,42 @@ void omap2_gpio_prepare_for_retention(void)
 
                if (!(bank->enabled_non_wakeup_gpios))
                        continue;
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-               bank->saved_datain = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
-               l1 = __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
-               l2 = __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
-#endif
-#ifdef CONFIG_ARCH_OMAP4
-               bank->saved_datain = __raw_readl(bank->base +
-                                                       OMAP4_GPIO_DATAIN);
-               l1 = __raw_readl(bank->base + OMAP4_GPIO_FALLINGDETECT);
-               l2 = __raw_readl(bank->base + OMAP4_GPIO_RISINGDETECT);
-#endif
+
+               if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
+                       bank->saved_datain = __raw_readl(bank->base +
+                                       OMAP24XX_GPIO_DATAIN);
+                       l1 = __raw_readl(bank->base +
+                                       OMAP24XX_GPIO_FALLINGDETECT);
+                       l2 = __raw_readl(bank->base +
+                                       OMAP24XX_GPIO_RISINGDETECT);
+               }
+
+               if (cpu_is_omap44xx()) {
+                       bank->saved_datain = __raw_readl(bank->base +
+                                               OMAP4_GPIO_DATAIN);
+                       l1 = __raw_readl(bank->base +
+                                               OMAP4_GPIO_FALLINGDETECT);
+                       l2 = __raw_readl(bank->base +
+                                               OMAP4_GPIO_RISINGDETECT);
+               }
+
                bank->saved_fallingdetect = l1;
                bank->saved_risingdetect = l2;
                l1 &= ~bank->enabled_non_wakeup_gpios;
                l2 &= ~bank->enabled_non_wakeup_gpios;
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-               __raw_writel(l1, bank->base + OMAP24XX_GPIO_FALLINGDETECT);
-               __raw_writel(l2, bank->base + OMAP24XX_GPIO_RISINGDETECT);
-#endif
-#ifdef CONFIG_ARCH_OMAP4
-               __raw_writel(l1, bank->base + OMAP4_GPIO_FALLINGDETECT);
-               __raw_writel(l2, bank->base + OMAP4_GPIO_RISINGDETECT);
-#endif
+
+               if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
+                       __raw_writel(l1, bank->base +
+                                       OMAP24XX_GPIO_FALLINGDETECT);
+                       __raw_writel(l2, bank->base +
+                                       OMAP24XX_GPIO_RISINGDETECT);
+               }
+
+               if (cpu_is_omap44xx()) {
+                       __raw_writel(l1, bank->base + OMAP4_GPIO_FALLINGDETECT);
+                       __raw_writel(l2, bank->base + OMAP4_GPIO_RISINGDETECT);
+               }
+
                c++;
        }
        if (!c) {
@@ -2064,20 +2097,23 @@ void omap2_gpio_resume_after_retention(void)
 
                if (!(bank->enabled_non_wakeup_gpios))
                        continue;
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-               __raw_writel(bank->saved_fallingdetect,
+
+               if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
+                       __raw_writel(bank->saved_fallingdetect,
                                 bank->base + OMAP24XX_GPIO_FALLINGDETECT);
-               __raw_writel(bank->saved_risingdetect,
+                       __raw_writel(bank->saved_risingdetect,
                                 bank->base + OMAP24XX_GPIO_RISINGDETECT);
-               l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
-#endif
-#ifdef CONFIG_ARCH_OMAP4
-               __raw_writel(bank->saved_fallingdetect,
+                       l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
+               }
+
+               if (cpu_is_omap44xx()) {
+                       __raw_writel(bank->saved_fallingdetect,
                                 bank->base + OMAP4_GPIO_FALLINGDETECT);
-               __raw_writel(bank->saved_risingdetect,
+                       __raw_writel(bank->saved_risingdetect,
                                 bank->base + OMAP4_GPIO_RISINGDETECT);
-               l = __raw_readl(bank->base + OMAP4_GPIO_DATAIN);
-#endif
+                       l = __raw_readl(bank->base + OMAP4_GPIO_DATAIN);
+               }
+
                /* Check if any of the non-wakeup interrupt GPIOs have changed
                 * state.  If so, generate an IRQ by software.  This is
                 * horribly racy, but it's the best we can do to work around
@@ -2103,30 +2139,36 @@ void omap2_gpio_resume_after_retention(void)
 
                if (gen) {
                        u32 old0, old1;
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-                       old0 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
-                       old1 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+
+                       if (cpu_is_omap24xx() || cpu_is_omap44xx()) {
+                               old0 = __raw_readl(bank->base +
+                                       OMAP24XX_GPIO_LEVELDETECT0);
+                               old1 = __raw_readl(bank->base +
+                                       OMAP24XX_GPIO_LEVELDETECT1);
                        __raw_writel(old0 | gen, bank->base +
                                        OMAP24XX_GPIO_LEVELDETECT0);
                        __raw_writel(old1 | gen, bank->base +
                                        OMAP24XX_GPIO_LEVELDETECT1);
-                       __raw_writel(old0, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
-                       __raw_writel(old1, bank->base + OMAP24XX_GPIO_LEVELDETECT1);
-#endif
-#ifdef CONFIG_ARCH_OMAP4
-                       old0 = __raw_readl(bank->base +
+                       __raw_writel(old0, bank->base +
+                                       OMAP24XX_GPIO_LEVELDETECT0);
+                       __raw_writel(old1, bank->base +
+                                       OMAP24XX_GPIO_LEVELDETECT1);
+                       }
+
+                       if (cpu_is_omap44xx()) {
+                               old0 = __raw_readl(bank->base +
                                                OMAP4_GPIO_LEVELDETECT0);
-                       old1 = __raw_readl(bank->base +
+                               old1 = __raw_readl(bank->base +
                                                OMAP4_GPIO_LEVELDETECT1);
-                       __raw_writel(old0 | l, bank->base +
+                               __raw_writel(old0 | l, bank->base +
                                                OMAP4_GPIO_LEVELDETECT0);
-                       __raw_writel(old1 | l, bank->base +
+                               __raw_writel(old1 | l, bank->base +
                                                OMAP4_GPIO_LEVELDETECT1);
-                       __raw_writel(old0, bank->base +
+                               __raw_writel(old0, bank->base +
                                                OMAP4_GPIO_LEVELDETECT0);
-                       __raw_writel(old1, bank->base +
+                               __raw_writel(old1, bank->base +
                                                OMAP4_GPIO_LEVELDETECT1);
-#endif
+                       }
                }
        }