rtc: ds1511: drop dead code

The watchdog part of the code is not reachable and should be reimplemented
properly as a watchdog driver.

Link: https://lore.kernel.org/r/20240227230431.1837717-3-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

diff --git a/drivers/rtc/rtc-ds1511.c b/drivers/rtc/rtc-ds1511.c
index a646bcf9cd56e185291cfd738df0876e863ee16e..fe8dbad51c8846c02cb438c3e35af7decb8763e1 100644 (file)
--- a/drivers/rtc/rtc-ds1511.c
+++ b/drivers/rtc/rtc-ds1511.c
@@ -122,50 +122,6 @@ rtc_enable_update(void)
        rtc_write((rtc_read(RTC_CMD) | RTC_TE), RTC_CMD);
 }
 
-/*
- * #define DS1511_WDOG_RESET_SUPPORT
- *
- * Uncomment this if you want to use these routines in
- * some platform code.
- */
-#ifdef DS1511_WDOG_RESET_SUPPORT
-/*
- * just enough code to set the watchdog timer so that it
- * will reboot the system
- */
-void
-ds1511_wdog_set(unsigned long deciseconds)
-{
-       /*
-        * the wdog timer can take 99.99 seconds
-        */
-       deciseconds %= 10000;
-       /*
-        * set the wdog values in the wdog registers
-        */
-       rtc_write(bin2bcd(deciseconds % 100), DS1511_WD_MSEC);
-       rtc_write(bin2bcd(deciseconds / 100), DS1511_WD_SEC);
-       /*
-        * set wdog enable and wdog 'steering' bit to issue a reset
-        */
-       rtc_write(rtc_read(RTC_CMD) | DS1511_WDE | DS1511_WDS, RTC_CMD);
-}
-
-void
-ds1511_wdog_disable(void)
-{
-       /*
-        * clear wdog enable and wdog 'steering' bits
-        */
-       rtc_write(rtc_read(RTC_CMD) & ~(DS1511_WDE | DS1511_WDS), RTC_CMD);
-       /*
-        * clear the wdog counter
-        */
-       rtc_write(0, DS1511_WD_MSEC);
-       rtc_write(0, DS1511_WD_SEC);
-}
-#endif
-
 static int ds1511_rtc_set_time(struct device *dev, struct rtc_time *rtc_tm)
 {
        u8 mon, day, dow, hrs, min, sec, yrs, cen;