net: phy: smsc: simplify config_init callback

Exit the driver specific config_init hook early if energy detection is
disabled. We can do this because we don't need to clear the interrupt
status here. Clearing the status should be removed anyway since this is
handled by the phy_enable_interrupts().

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c
index 19ab2821cff028c1819ae06d4a79a6c884a94baa..0bcdf927a790e611e4fc649ca16aca9237264720 100644 (file)
--- a/drivers/net/phy/smsc.c
+++ b/drivers/net/phy/smsc.c
@@ -73,19 +73,21 @@ static int smsc_phy_ack_interrupt(struct phy_device *phydev)
 static int smsc_phy_config_init(struct phy_device *phydev)
 {
        struct smsc_phy_priv *priv = phydev->priv;
+       int rc;
+
+       if (!priv->energy_enable)
+               return 0;
 
-       int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
+       rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
 
        if (rc < 0)
                return rc;
 
-       if (priv->energy_enable) {
-               /* Enable energy detect mode for this SMSC Transceivers */
-               rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
-                              rc | MII_LAN83C185_EDPWRDOWN);
-               if (rc < 0)
-                       return rc;
-       }
+       /* Enable energy detect mode for this SMSC Transceivers */
+       rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
+                      rc | MII_LAN83C185_EDPWRDOWN);
+       if (rc < 0)
+               return rc;
 
        return smsc_phy_ack_interrupt(phydev);
 }